REPAIR / MAINT OF BARBED WIRRE, CONCERTINA COIL, CHAIN LINK FENCING

Amount

Excavation in trenches for n.exc 1.50m wide not exceeding 10 Sqm on plan and n.exc 1.5m in depth in soft/ loose soil and getting out all as sfd and directed.

M&L for 100 mm thick PCC 1:4:8 type D2 graded stone aggregate cement concrete in foundations, filling and mass concrete all as sfd and directed.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m. all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

M&L for Rendering 15mm thick cement plaster on fair face of brick work or concrete surface, masonry surfaces other in cement mortar 1:4 finished complete all as specified.

M&L for Preparation of new plastered surface of wall and applying two coats of cement base paint overt a coat of cement wash with white cement.

Supply only chain link 4mm dia MS galvanisd fencing, of 100x100mm mesh size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and forecast concrete articles, complete all as sfd and directed.

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for Preparation of old decorated plastered or unplastered wall surfaces and applying one coat of cement base paint on wall surfaces

M&L for Preparation of old plaster surface of wall applying one coats of Appx exterior emulsion paint (Asian paint) on wall surfaces complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cmcomplete all as specified

S&F angle iron post and struts in fencing incl cutting tops to shape as directed drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc incl all necessary drilling , bolting or riveting etc and similar work confirming to FE 290 Gde E-165.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as directed.(Fixing pole)

M&L for Preparation of new surfaces of steel of any description over 10cm grith or width, not otherwise described with one coat of red oxide followed by two coats of synthetic enamel paint all as specified and directed.

M&L for Preparation of old surfaces of steel of any description over 10cm grith or width, not otherwise described with one coat of red oxide followed by two coats of synthetic enamel paint all as specified and directed.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. complete all as specified and directed (each line wire to be measured).

Fixed in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. complete all as specified and directed (each line wire to be measured) (Fixing only)

S&F in repair punched tape concertina coil as per IS 4454 with galvanised coating thickness of 230mm Gm/Sm and punched tape as per IS 513 deep drawn quality with a galvanising coating thickness of 12 micron minimum having 50 nos of fixed in position and secured to both sides of shaped angle iron post with 2.642mm GI wire (concertina coil weighting 15Kg approx per coil stretchable to 8 to 9m length complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings as in benching including weathering slightly rounded or chamfered angles including necessary form work and mixing of integral water proofing compound as per manufacturer's instructions complete all as directed (Water proofing compound shall be measured and paid separately).

M&L for glass coping on top of walls in CM 1:3 complete all as specified and directed (Note :- taking and removing rubbish)

M&L for Construction steel wicket gate 1.4 wide and 2 m high including RCC columns, painting steel surfaces in two coats over one coat of primer and two coat of cement base paint over a coat of white wash to RCC column incl excavation and earth work in any type of soil, complete all as specified. ( As per Drg No : CEPZ/STD-140/11 2/2)

M& L for demolition of reinforced cement concrete any description complete all as specified and directed. cement concrete any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition)

M&L for Pre-cast cement concrete type B-1 (1:2:4) (using 20mm graded aggregate) as in drain cover slabs set in cement mortar 1:6 including necessary formwork complete all as specified and directed.

S&F Mild steel round bars 8mm dia and over, cut to length, bent to shape required, including ranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250)Part- I quality-A orFe 290 (Gde -E-165

M&L for Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in benching including weathering slightly rounded or chamfered angles including necessary form work and mixing of integral water proofing compound as per manufacturer's instructions complete all as directed (Water proofing compound shall be measured and paid separately).

Extra for forming finished drain or channel 30cm inner grith in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc (inner grith only to be measured for payment)

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100m all as specified and as directed.

M&L for 100MM thick Cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in mass-concrete/foundation or floor complete all as specified and directed

M & L for chequered cement concrete with tiles of size 20cm x20cm x 25 mm and 15mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry and pointed with coloured cement to match.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade laid over including 25mm thick sand cushioning including filling of joints with sand with grey cement pigment complete all as specified and directed.

Dismantling of floor,hearth or wall tiling includinguding cement mortar bedding but not backing and rubbish off the premises.

M & L for non-skid Heavy duty endura tile 300x300x10-12mm thick coloured joint free in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed.

M&L for 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) all as specified and directed.

S&F Plastic dividing strips, 1.5 mm thick

S&F in repair concrete Jaffery wall complete

Taking down unserviceable ceiling fan (any make any size) from various location from users residence for carrying out the repair, reassembling the same including replacement of wornout nuts, bolts and washers, MS clip screw split pin, ball bearing, bush rubber reel including derusting, servicing, oiling greasing, rewinding of fan motor with super enamelled copper of suitable gauge, reinstalling, testing and making electric connection to ensure and making electric connection to ensure proper functioning and commissioning complete all as specified and directed. Note : (i) The unit rate includes the cost of all spares material as mentioned above except rewinding of fan motor, bush MS Clip, rubber reel and ball bearing. (ii) The rewinding of fan, moter, bush MS Clip, rubber reel & bell bearing shall be measured paid separately (iii) All fan should be repair/winding AGE E/M premises through establish repair shop at own arrangement

M&L for opening up the winding of ceiling fan 1200 mm any make and type and rewinding with super enamelled copper winding wire with suitable gauge winding ,wraping insulating material, insertion and varnishing well including drying complete. Testing of the ceiling fan after refixing in position to the entire satisfaction of Engr-in-Charge.

M&L for opening up the winding of ceiling fan any 1400 mm any make and type and rewinding with super enamelled copper winding wire with suitable gauge winding ,wraping insulating material, insertion and varnishing well including drying complete. Testing of the ceiling fan after refixing in position to the entire satisfaction of Engr-in-Charge.

Supply only ball bearing No. 6201,

Supply only ball bearing No. 6202,

S&F in replacement capacitor of 2.5 MFD,

S&F in replacement capacitor 3.15 MFD

Supply only rubber reel suitable for ceiling fan of any capacity complete all as specified and directed.

S&F Ceiling fan blade suitable for 1200mm sweep of any make with suitable size as per site requirement complete all as specified and directed.(As per sample)

Supply only worn out shaft, beyond economical repair of existing ceiling fan any make, type or size as per original one ceiling/exhaust fan complete all as directed.

M & L for painting of ceiling fans , in situ with synthetic enamel paint by spraying including filling cavities with filler, one or more coat to achieve even and smooth surface after cleaning all dust etc.and endorsement of fan no.with black synthetic enamel paint complete all as directed.

S&F in replacement PVC cable copper conductor multi strandrad flexible 23/76 twin core and making connections from ceiling rose to fan complete all as directed.

S&F PVC canopy upper and lower of celing fan of any make & size complete with nuts, bolts & washers as per sample approved (As per sample).

S&F ceiling fan down rod 0.3 mtr long duly made out off mild steel including rubber bush nut, bolt, washer and split pin complete all as specified and directed.

S&F down rod for ceiling fan made out of galvanized iron pipe of size 15mm dia medium grade (ISI marked) of length 1mtr/1.20/1.5 metre (As per site reqd) including threading, cutting, slotting, drilling including nut, bolt, clip, washer and rubber real complete all as specified and directed.

M&L for collection of unserviceable pedestal fan/Wall fan / cabin fan (any make any size) form AGE E/M stores or taking down from users residence for carrying out the repair, reassembling the same including replacement of wornout nuts, bolts and washers, MS clip screw split pin, ball bearing, bush rubber reel including derusting, servicing, oiling greasing, rewinding of fan motor reinstalling, testing and making electric connection to ensure and making electric connection to ensure proper functioning and commissioning complete all as specified and directed. Note : The unit rate includes the cost of all spares material as mentioned above except rewinding of fan motor, bush and ball bearing. The rewinding of fan, moter, bush & bell bearing shall be measured paid separately.

Rewinding to fan motor of any capacity of any make with supper enameled copper winding wire of existing size and quantity including insulating materials i.e varnish, sleeves etc with full satisfaction of engineer-in-charge for following :-

(a) Wall fan / Cabin fan 350/400 mm sweep any make

(b) Pedestal fan 400/450 mm sweep any make

Supply only bush for the pedestal fan/Wall fan / cabin fan of any make and any sweep complete all as specified and directed.

Supply only ball bearing for pedestal fan/Wall fan / cabin fan fan/exhaust fan & cabin fan complete all as specified and directed.

Supply only worn out shaft, beyond economical repair of existing ceiling fan any make, type or size as per original one ceiling/exhaust fan complete all as directed.

S&F in replacement capacitor of 1/1.50 MFD,

S & F gear box for pedestal fan/Wall fan / cabin fan fan/exhaust fan & cabin fan complete all as specified and directed.

M&L for collection of unserviceable Exhaust fan (any make any size) form AGE E/M stores or taking down from users residence for carrying out the repair, reassembling the same including replacement of wornout nuts, bolts and washers, MS clip screw split pin, ball bearing, bush rubber reel including derusting, servicing, oiling greasing, rewinding of fan motor reinstalling, testing and making electric connection to ensure and making electric connection to ensure proper functioning and commissioning complete all as specified and directed. Note : The unit rate includes the cost of all spares material as mentioned above except rewinding of fan motor, bush and ball bearing. The rewinding of fan, moter, bush & bell bearing shall be measured paid separately.

Rewinding to fan motor of capacity of any make with supper enameled copper winding wire of existing size and quantity including insulating materials ie varnish, sleeves etc with full satisfaction of engineer-in-charge for following :-

(a) Exhaust fan 220 mm to 300 mm sweep any make

(b) Exhaust fan 375mm sweep any make

(c) Exhaust fan 450mm sweep/Air circulator 600mm sweep of any make

(d) Air Circulator Industrial type 750 mm sweep

Supply only bush for the exhaust fan of any make and any sweep complete all as specified and directed.

Supply only ball bearing for exhaust fan complete all as specified and directed. Make : NBC/SKF

S&F Condenser but 4 MFD complete all as specified and directed. Make : Siemens/EPCOS/Usha/Asian

S&F in repair Fresh air fan motor of capacity 1/6 HP 230 volts, 50 Hz, AC supply suitable for 250 mm size Fresh air fan as per sample complete all as spd and directed.

S&F in repair Fresh air fan motor of capacity 1/6 HP 230 volts, 50 Hz, AC supply suitable for 200 mm size Fresh air fan as per sample complete all as spd and directed.

Supply only exhaust fan motor capacity 1/4 HP 230 volts suitable for 230/300 mm size exhaust fan complete all as directed.

M&L for painting of Exhaust fan including fan blade of any make or any sweep at site with one coat of synthetic enamel paint on old painted surface by brush including cleaning all dust/oil/greasing etc by soft soap solution and rewriting existing MES number with black paint complete to the entire satisfaction and as directed by Engineer-in-Charge.

Supply and fix in repair A C starter unit consisting of one 25 Amp capacity starter, one 240 V 25 Amps 10 KA SPN MCB, one 25 Amps socket and one 25 Amps plug top prewired of Make : North West / Havells / Legrand complete as specified after taking out old unserviceable starter unit all as directed.

S &F in repair C curve series MCB SP 6 to 32 Amp, 240 volts, 10 KA complete all as specified and directed.

Supply and fix in repair C cuurve MCB SP 40 Amp rating 240 volt 10 KA complete all as specified and directed.

S &F C curve series MCB SPN 32 Amp, 240 volts, 10 KA complete all as specified and directed.

S &F C curve series MCB SPN 40 to 63 amp, 240 volts, 10 KA complete all as specified and directed.

Supply and fixing in repair ventilating Fan 200 mm sweep, non metallic resin body, single phase 240 volts AC 50 Hz including louvers, and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge. Note : Old material deposited to MES store Yard

Supply and fixing in repair Ventilating Fan 250 mm sweep, non metallic resin body, single phase 240 volts AC 50 Hz including louvers, and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge. Note : Old material deposited to MES store Yard

Supply and fix in repair wall mounted fan 400mm size, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord system complete all as specified and directed.

Supply and fixing in repair Pedestal fan 400mm sweep 1400 RPM, 100 watt , air delivery 115CMM double bearing one year warranty complete all as specified and directed by Engineer -in-Charge.

M & L for in replacement for only twin core PVC insulated unarmoured cable 6 Sqmm Flat 1100 Volts with Aluminium multi stranded conductor all as specified and directed by Engr-in-Charge.

Taking down the geyser from existing position after disconnecting electrical and water supply connection without any damage for repair/general cleaning/overhauling, cleaning,descaling the inner tank and assembly with suitable chemical/detergent and making the geysers fully serviceable and refixing the same in new/old position and testing complete all as specified and directed. Note :The spare parts required for making the geyser serviceable, shall be measured and paid seperately in respective item of Schedule mentioned here in after

Supply and fix in replacement of fusible plug type air release valve complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of gasket of thickness 5mm for geyser assembly of 06/08/09 holes complete all as specified and directed.

Supply and fix in replacement apparatus plate assembly of 06/08/09 holes suitable for 25/35/50 Ltrs geysers with suitable size of nut bolts/stud/washer complete all as specified and directed. Make - Bajaj/ Theeta/ CG

Supply and fix in replacement of indicating lamp for geyser rectangular /round type red/ green suitable for any type of geyser complete all as specified and directed.

Supply only sheet metal bottom/upper cover of Geyser with existing size and gauge 18/20 SWG suitable for 25/35/50 Ltr complete all as specified and directed

Supply and fix in replacement bottom show cover of Geyser of gauge 18 SWG of capacity 25 Ltr/35 Ltr/50 Ltr complete all as specified and directed.

Supply only glass wool of superior quality complete all as specified and directed.

Supply and fix in replacement of inner tank vertical type suitable for 25 Ltr geyser duly enamel coated steel tank of Geyser of gauge 18 SWG of capacity and making welding 4 side of geyser for stop falling of tank complete all as specified and directed.

Supply and fix in replacement of inner tank vertical type suitable for 35/50 Ltr geyser duly enamel coated steel tank of Geyser of gauge 18 SWG of capacity and making welding 4 side of geyser for stop falling of tank complete all as specified and directed.

Supply and fix in replacement rubber ring of existing size with mild steel ring clamp to lower and upper housing of geyser 25/35/50 Ltr complete all as specified and directed.

Supply and fix in replacement outer body of Geyser suitable for 25 Ltr capacity of geyser of 20 SWG mild steel sheet duly painted complete all as specified and directed.

Supply and fixing in replacement of outer body of Geyser suitable for 35/50 Ltr capacity of geyser of 20 SWG mild steel sheet duly painted complete all as specified and directed.

Supply and fixing in replacement of sheet metal enclosure single pole and neutral, earth plug & socket of capacity 20 Amp including one MCB SP, 20 Amp 10 KA, curve ‘C’ series complete all as specified and directed.

S&F in repair angle valve chromium plated cast copper alloy screwed down high pressure concealed type screwed both ends of size 15 mm bore complete all as specified and directed

S & F in repair gate valves (Gun metal globe valve) with iron wheel head, screwed both ends for iron pipe and fixed for 25 mm dia, complete all as specified and directed. Note: The quoted rate is deemed to be inclusive of cutting, threading, insertion of union joint, nipple etc for the required size of pipe.

M&L for soldering and brazing inner copper tank 50/25/35 ltrs with brass solder and refixing complete (taking down and fixing shall be paid under item No 3 above)

S&F in replacement of PVC insulated flexible copper wire 3 core of size 40/.0076 complete all as specified and directed.

S&F SS braided pipe of 12 mm (Internal) suitable for hot/cold water, 600 mm long with brass nuts and rubber washers complete all as specified and directed.

S&F Chromium plated connection pipe, 15mm dia,600mm long (Heavy duty) complete all as specified and directed.

S&F in repair bib tap chromium plated of size 15 mm bore complete all as specified and directed

S&F in repair thermostat switch suitable for geysers of capacity 25 ltrs of any make including star rated geysers complete all as specified and directed.

Supply and fix in replacement heating element 1.5 KW, round/Triangle type with rubber gasket suitable for geysers of 25/50 ltrs if any make including star rated geysers of Bajaj/Racold complete all as specified and directed.

Supply and fix in replacement heating element 2 KW, triangle/round type with rubber gasket suitable for geysers of 25/50 ltrs if any make including star rated geysers of Bajaj/Racold complete all as specified and directed.

Supply and fix in replacement heating element modular type of capacity 1.5 KW/2 KW, Modular type suitable for star rated modular type geysers of make Bajaj/ Racold with rubber gasket complete all as specified and directed.

Supply and fix in replacement thermostat switch Modular type suitable for modular type geysers complete all as specified and directed.

S&F in repair plug top 15 Amp 3 pin complete all as specified and directed.

S&F in repair plug top 5 Amp 3 pin complete all as specified and directed.

Supply & fix in replacement PVC box comprising of switch socket combination multi - purpose 5 pin, 6/16 Amp box type complete all as specified and as directed.

Supply & fix in replacement PVC box comprising of switch socket combination multi - purpose 3 pin, 6 Amp box type complete all as specified and as directed.

S & F in repair gate valves (Gun metal globe valve) with iron wheel head, screwed both ends for iron pipe and fixed for 25 mm dia, complete all as specified and directed. Note: The quoted rate is deemed to be inclusive of cutting, threading, insertion of union joint, nipple etc for the required size of pipe.

M&L for in replacement plug top, 3 pin, 10/20 amp earth metal clad (ISI marked) complete all as directed.

S&F in replacement socket 3 pin 10/20 amp earth metal clad (ISI marked) as directed.

M & L for tape roll big size complete all as specified.

M & L for in replacement fastner 100mm long & 6mm dia long with suitable size of nut for fixing geyser /Exhaust Fan all as directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.

M/S SWASTIK BUILDERS

M/S A M ENTERPRISES

chauhan construction

M/S V K MEHROTRA

MOHAMMAD RIZWAN CONTRACTOR

M.R. ENTERPRISES

M/S SATISH KUMAR