CLEANING OF EXISTING SEWAGE LINE, SEPTIC TANK AND REPAIR TO DRAIN, CULVERT, FENCING, JAFFERY WALL, PATH, HARD STANDING ETC IN CAMP AREA, MAUDE LINE, AFSR AND OTHER MD/OTM ACCN OF AGE B/R-II AREA AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT-10

Amount

De-silting and cleaning of sludge from Septic tank up to 5 mtr deep by mechanically operated Sucking/ Hydraulic pressure machine and taking out sludge/muddy/sewerage water/debris from the tank and removing the same from site to out of MOD land including flushing with water after cleaning complete all as specified and as directed.

De-silting, cleaning and clearing the blockage of sewage lines upto 150mm bore (SGSW/RCC pipe) between manholes (any depth) by approved mechanical means as per standard engineering practice from manholes to manhole and removing the debries/sluge from site to out of MOD land including flushing the line with water & testing after cleaning complete all as specified and as directed by Engineer-in-Charge.

Cleaning of sewage lines including manholes of dia 150mm to 300mm and depth exceeding 1mtr including de-sludging by super sucker machanically operated truck mounted of minimum 25 tonne capacity with minimum 12000 ltr water tanker fitted with high pressure jet ( Min jetting pressure 3000 PSI to 4500 PSI) machine for 8 working hours per day excluding stand by period and disposal period of sluge out side MoD land complete all as specified and as directed. Note for item No 1 to 3 :- (a) No water shall be supplied by MES for cleaning/ flushing of sewer lines. (b) Generally flow of pressure 3000 to 4500 PSI at least 6 gallons per minute is required for braking of blockages and cleaning of sludge from lines. (c) Contractor shall arrange all the T&Ps / machines as mentioned in said items within 15 days from the date of commencement of work. (d) The complaints of line blockage must be complied within 8 hours failing which a penal recovery of Rs 1500/- per day shall be made from the contractor's dues. (e) The sludge/muddy/sewerage water/debris etc shall be removed from site to out of MOD land. The quoted rates are deemed to be included in the above item for the above provisions and nothing extra shall be paid on these account.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and not exceeding 10 Sqm on plan and not exceeding 1.50 m in depth for manholes, well etc and getting out in soft/loose soil complete all as specified and as directed.

Description all as per Srl Item No 4 here-in-before but depth exceeding 1.50m and not exceeding 3m complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Removing excavated materials to a distance exceeding 50m but not exceeding 200m and depositing where directed at a level not exceeding 1.50m above the starting point in soft/loose soil complete all as specified and as directed.

Demolition & breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar including bed concrete internal dia of pipe 150mm and removal of demolished materail out of MoD land complete all as specified and as directed.

Description all as per Srl item No.8.00 here-in-before but internal dia 200mm complete all as specified and as directed.

Material and Labour for concrete bed to 150 mm bore drain pipes in cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregates) including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

All as per item No 10 here-in-before but bore of pipe 200 mm complete all as specified and as directed.

Material and Labour for 150 mm internal dia reinforced cement concrete pipes drain pipes class NP-2 laid in trenches and jointed complete all as specified and as directed.

Material and Labour for 200 mm internal dia reinforced cement concrete pipes drain pipes class NP-2 aid in trenches and jointed complete all as specified and as directed.

Cleaning of manhole upto 1 m depth and removal of sludge silt/ liquid/ mud/ sand/ water etc in foul position and removal to outside the MoD land complete all as specified and as directed. Note:- Manhole should be individual.

Description all as per srl item No 14.00 here-in-before but depth exceeding 1m and not exceeding 2m complete all as specified and as directed. Note:- Manhole should be individual.

Description all as per srl item No 14.00 here-in-before but depth exceeding 2m and not exceeding 3 m complete all as specified and as directed. Note:- Manhole should be individual.

S&F in repairs, SFRC drain cover size(1000mm x 500mm) x 70mm thick laid over existing drain complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete.(b) M/s KK Manhole.(c) Or equivalent

S&F in repairs, SFRC MH Frame with cover of size (600mm x600mm) x 70mm thick surrounded with steel strip (70x2)mm reinforced as per manufacturer's design in Manufactured proccess laid over existing drain complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole. Or equivalent

S&F in repair 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with and including suitable PVC clamps complete all as specified and as directed.

S&F in repair 150mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with and including suitable PVC clamps complete all as specified and as directed.

S&F in repair PVC (SWR) bends, 150mm dia fixed to PVC pipes complete all as specified and as directed.

S&F in repair PVC (SWR) bends, 110mm dia fixed to PVC pipes complete all as specified and as directed.

S&F in repair 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with and including suitable PVC clamps complete all as specified and as directed.

S&F in repair PVC (SWR) bends, 75 mm dia fixed to PVC pipes complete all as specified and as directed.

Dismantling of MS/CI pipe including fittings of any description, any dia, complete all as specified and as directed.

Supply and Fixing for cast iron, sand cast, soil, waste & vent pipes, 100mm bore in any length with or without ears with cement joints fixed to walls complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing for cast iron, sand cast soil waste & vent pipes 75mm bore in any length with or without ears with cement joints fixed to walls complete all as specified and as directed

Supply and Fixing CI branch piece single/Tee etc (equal or unequal) ordinary or invented (spigot or socket type) or with parallel branches, bore of pipe 100mm complete all as specified and as directed.

Supply and Fixing cast iron branch piece/Tee etc 75mm bore size with oval access door single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and Fixing cast iron bends any radius, diminishing pieces or tapers 100mm bore size complete all as specified and as directed.

Description all as per Srl item No 30.00 here-in-before but for 75 mm bore complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed. Note:- Payment for providing grooves shall be made separately under respective item.

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in copings/benching including use and waste of necessary formwork etc complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) with water proofing compound @3% by weight of cement on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. Note:- (a) WPC shall be measured and paid seperately. (b) The work shall be carried out upto Four storey & necessary scafolding shall be deemed to be included in unit rates.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement as on wall complete all as specified and as directed.

S&F in repairs gully traps size 150mm X 150mm square or round mouthed type 'P' including CI cover complete all as specified and as directed.

Supply only Water Proofing compound complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 Section) in cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregates), smooth finished and reforming benching as required, Internal dia of pipe 150mm/200 mm complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry build in cement mortar including all quions/archers etc completed all as specified and as directed.

Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed by Engr-in-Charge.

Description all as per srl item No 42.00 here-in-before but except bricks complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in channel, coaping, benching, roof padding and drains etc finished even and smooth complete all as specified and as directed.

Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15cm thick above or below ground level including removal of debris out of MoD land complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection and paving, finishing even and smooth without using extra cement complete all as specified ans as directed.

M&L for chequered cement concrete tiles of size (30cm x 30cm) x 25mm thick pre printed colour, set and jointed in neat cement slurry and pointed with grey cement and pigment with and including over screed bed 15mm thick in cement mortar (1:6) as in path, complete all as specified and as directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver block of M-35 with grey cement & pigment complete all as specified and as directed.

M&L sand layer under floor of interlocking paver tiles including watering and consolidation complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in floor, sub floor etc complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in kerbs or mud stops, rounded or chamfered edges, etc complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on concrete surfaces including preparation of surface complete all as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls, and applying two coats oil emulsion distemper white or coloured over a coat of approved primer complete all as specified and as directed.

S&F in repair 15mm dia pillar tap, cast copper alloy with capstan head, chromium plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repair 15mm dia angle valve, cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair 15mm dia stop valve, cast copper alloy, chromium plated, screwed down, high pressure with long shank or butterfly handle screwed both ends for iron pipe or union and fixed complete all as specified and as directed.

S&F in repair 15mm dia bib tap, cast copper alloy, chromium plated with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including PVC sheet cover white with hinging devices complete all as specified and as directed.

S&F in repair vitreous china squatting pan of pattern “Orissa”, size 580 mm x 440 mm white with ‘P’ or ‘S” trap, integral foot rest including provision of lime concrete bedding and allied works complete all as specified and as directed.

S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repair vitreous china wash hand basin 550mmX400mm in size, white, flat back type with 32mm dia brass chromium plated waste fitting, 32mm bore PVC waste pipe, a pair of cast Iron brackets duly painted including cutting and pinning in ends, making good disturbed surfaces in cement mortar (1:3) complete all as specified and as directed.

Taking down and re-fixing old wash basin including 32mm dia brass chromium plated waste fitting, 32mm bore PVC waste pipe, a pair of cast Iron brackets duly painted including cutting and pinning in ends, making good disturbed surfaces in cement mortar (1:3) complete all as specified and as directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repair brass chromium plated swivel shower rose 125mm size fancy type fixed to 15 mm bore pipe complete all as specified and as directed.

S&F in repair 15mm dia galvanised steel water tubing ‘Medium Grade’ with all ISI marked fittings fixed on walls, ceiling or laid in floors etc. complete all as specified and as directed.

S&F in repair 20mm dia galvanised steel water tubing ‘Medium Grade’ with all ISI marked fittings fixed on walls, ceiling or laid in floors etc. complete all as specified and as directed.

Dismantling of floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish off the premises complete all as specified and as directed.

M&L for glazed ceramic tiles in vertical surface of size (450mm x 300mm) x 7mm thick coloured printed set and jointed in neat cement slurry and pointed in white or coloured cement to match as in dado/skirting with and including 10mm thick cement plaster on other than fair face of brick wall with CM (1:4) complete all as specified and as directed.

M&L for 25mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floors, etc., and finished the cement concrete surfaces even and fair with using extra cement complete all as specified and as directed.

M&L for non–skid ceramic coloured tiles of size (300 x 300)mm x 7mm thick or (400X400)mm x 7mm thick, laid on floor, over and including 15mm thick screed bed in cement mortar (1:4), laid and Jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and as directed.

S&F in repair 500 ltrs rotational moulded polyethylene water storage three layered tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-charge .

M&L for removal of blokage of soil/waste pipes WC, WHB, Bottle Trap, Floor Trap etc running on external wall of buildings complete all as specified and directed.

M&L for providing precast cement concrete louvres and jallies 25mm thick (measured solid) with PCC (1:3:6) type C0 (using 12.5 mm graded stone aggrigate), including all mouldings but excluding frame set in cement mortar (1:4) complete all as specified and as directed.

Dismantling of expanded metal any thickness or mesh of weight n exc 4.0 Kg/Sqm fixed with fillets of any description complete all as specified and as directed.

S&F 2.5mm dia chain link MS galvanised fencing of mesh size (75x75)mm size including line wire, fillets, straining bolts etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F mild steel work such as angle iron post , flat iron in fencing including cutting as making doubble swan neck i.e. "Y" shaped including welding with proper overlapping & welding MS Plate with angle iron bottom as directed, drilling holes notching for wire etc embedded in concrete fixed vertically conforming to Fe 290 grade E-165 complete all as specified and as directed. Note:- Embedded portion of Angle Iron post shall be painted with red oxide primer.

Supply and fixing concertina coil with punched tape of 600 mm dia , centre core wire shall be minimum 2.5 mm dia of mild steel wire conforming to IS 280-2006. Galvanised coating of steel concertina coil shall confirm to the requirements as laid down for medium coated wire in IS 4826 "Hot dipped galvainsed coating of round steel wires" conretina coil shall be fixed in diamond shape with the help of dovetail two handle and spikes shall be fixed at both end of coil,minimum straight length of the wire 150 RM of 10 RM of work, minimum weight 13.5 Kg for 10 RM of work i.e. 90gm per RM of wire complete all as specifed and directed.

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed. Note:- Each line of wire shall be measured.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in anchorage blocks for holdfast in walling, set in cement mortar (1:4) with pillar, fair faces including chamfers weathering etc. complete all as specified and as directed.

Excavation in post holes (or similar holes) not exc. 0.50 Cum each in soft/loose soil and getting out including returning, filling in and removing surplus spoil to a distance not exc. 50.00 m and making good the surfaces complete all as specified and as directed.

M&L for mild steel structural work as in stanchion and column including covering plate from steel sections, hollow sections conforming to Fe-410-0 or Fe-310-0 including all necessary welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated, complete all as specified and as directed.

M&L for mild steel structural work as in rafter and purlins including covering plate from steel sections, hollow section of any description conforming to Fe-410-0 or Fe-310-0 including all necessary welding, bending Cold or Hot, drilling holes for bolts, in any shape or size as indicated, complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, etc. and for fixing posts complete all as specified and as directed.

M&L for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed in repair with self tapping J hooks including dismantling of existing sheet in any position complete all as specified and as directed by Engr-in-Charge.

S&F in repair framed work such as grills, gratings, drain cover etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M/S Davinder Kumar

JAIPAL AND BROTHERS

H.B. Traders

DEV CONSTRUCTION

yameen enterprises

Kunal Construction Co.