SPECIAL REPAIR TO COMBAT VEH DIV BLDG NO P 68 MILIT GIRINAGAR PUNE 25

Amount

B/R SERVICES Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing from site all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises.

Concrete of any description and in any position not otherwise specifically provided for Kitchen platform

Demolition of Brickwork or stone masonary built in Cement mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles

Dismantling valley gutters plain steel sheets of any gauge/ thickness as in roof covering including naintal or Similar pattern roof covering.

Dismantling ceiling boards of any description /insulation etc including cover fillets etc all as specified and directed by Engr-in-Charge..

Hacking out old broken glass from steel / metal frame.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering and wall cladding

Taking down chowkats or frame of wooden or steel Not exc 1.5 Sqm with shutters (without taking of shutter from the frame).

Taking down chowkats or frames of wooden or steel exc 1.5 sqm & n.exc. 4 Sqm with Shutters (without taking off shutters from the frames).

Taking down shutters of any description n. exc. 2 sqm each.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off outside MD land all as specified and directed.

Forming jambs etc to opening including cutting toothing and properly bonding into old work including facing and pointing (if necessary) to match existing work complete in CM 1:4

M&L for Precast cement concrete block masonary Type C1 1:3:6 with solid blocks exc 10cm in width and setting in CM 1:6

Rendering 15 mm thick of fair faces of brick work or concrete surfaces in CM 1;6. finished even and smooth without using extra cement.

Rendering 20 mm thick of sand faced plaster as specified on brickwork or concrete work in CM 1:4 with waterproofing compound in double coat (15+5mm).

Rendering 20 mm thick of sand faced plaster as specified on stone work in CM 1:4 with waterproofing compound in double coat (15+5mm).

M&L for complete removal of existing paint and applying two coats of oil bound distpemper over a coat of primer on old surfaces of wall

M&L for two coats of oil bound distpemper over a coat of primer on New surfaces of wall

M&L for two coats of external acrylic (100%) waterproof emulsion paint Apex Ultima or equivalent complete all as specified and directed over a coat of alkali resistant primer on new plastered surfaces of wall including necessary scaffolding required for painting work, safety measures etc

Complete removal of existing treatment for surfaces of walls/roof projection/chajja including concrete (plastered or un plastered) by brooming down and scraping wherever necessary and apply two coats of external acrylic (100%) waterproof emulsion paint Apex Ultima or equivalent including necessary scaffolding required for painting work, safety measures etc complete all as specified and directed

M&L for preparation of surfaces and applying 2mm thick wall care putty in two layers on walls/concrete surface internally complete all as specified and directed.

M&L for preparation of surfaces and applying 2mm thick waterproof wall care putty in two layers on walls/concrete surface externally complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified, supplied and fixed size 105X60mm

M&L for PCC 1:2:4 type B1 (20mm Graded stone aggregate) as in filling in frame and bed block for fixing of holdfast fo door frame.

S&F Flush shutter solid core 35mm Thick with block board core and plywood face panels commercial type on both side with lipping/frame to match

S&F Decorative Laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive to Plywood as per manufacturers instruction.0.9mm Thick

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, all as mentioned in Item No. 8095 of SSR Part-II.

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drg given on Sl. Page No. 156 of SSR Part-II 2010 Refer item No. 8080 as specified and directed by Engr-in-charge.

S & F butt hinges medium weight cold rolled mild steel size of hinges 100 mm

S&F brass sliding door bolts with sand or die cast brass hasp and staple (Bolt Type) and fixing bolt with rolled or drawin brass bolt and fixed length of bolt 250mm

S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250 mm.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm long.

S&F aluminium handles, anodised, cast type, of size 150 mm

S&F Brass handles, polished type, of size 150 mm

M&L for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring.

M&L Aluminium (Extruded section) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

M&L for Powder coated aluminium frame for doors, windows, ventilators, Partitions with one or more rebate including joining cleat for fixing etc complete.

M&L for Powder coated aluminium door window and ventilator shutters, fixed type/sliding type without sash bar, aluminium section wighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, Handle, lock, powder coated aluminium snap beading scres etc complete

M&L Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290.Gde-E-165

M&L for two coats of synthetic enamel paint over a coat of red oxide on steel surfaces

M&L for preparation of old painted steel surfaces and applying single coat of synthetic enamel paint of any description over 10cm in width or girth not otherwise described

M&L for preparation of old painted steel surfaces and applying single coat of Aluminium paint of any description over 10cm in width or girth not otherwise described

Taking down carefully hood and steel rolling shutter of size 5m x 6m height and refixing in the same opening after cleaning of guide rails,laths, top cover by kerosene and proper greasing, oiling, replacement of rusted nut, bolts etc, removing of bend, alignment etc to make the system smooth functional & making good the disturbed surfaces all as directed by Engr-in-charge. NOTE :- (i) Quoted rate shall be inclusive of providing missing nuts, bolts, greasing, oiling, denting, tension to spring etc.

M&L for safety lever locks mild steel with 4 levers for rolling shutters

M&L for hevay duty ball bearing for rolling shutters of size 5m x 6m height Note: Properties of replaced ball bearing should match with properties of existing ball bearing.

S&F Stainless Steel fancy type curtain rod 25mm bore all as specified and directed by Engr-in-Charge.

S & F Stainless Steel brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed by Engineer-in-Charge.

S&F sheet glass ordinary quality and glazing with oil putty in square n exc 0.5sqm each 4mm thk but frosted on one side

M & L for 25mm Thk Cement concrete type B-1 1:2:4 (20mm Graded stone aggregate) as in sub base or levelling course.

M&L for 300x300X 6 to 7mm thick, non skid, ceramic, coloured tiles, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed by Engr-in-Charge.

M&L for 350x450x7mm thick, coloured, glazed ceramic tiles as in skirting/Dado, laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10mm thick backing coat in CM 1:4 including triangular filleting on top in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for coloured glazed vitrified tiles 600x600x10mm thick as in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 20mm thick screed bed in CM 1:4 all as specified and directed by Engr-in-Charge.

M&L for coloured glazed vitrified tiles 600x600x10mm thick as in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 10mm thick backing coat in CM (1:6). all as specified and directed by Engr-in-Charge.

S & F Machine cut cuddappa stone slab one side polished 20 to 25mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 20mm screed bed in cement mortar (1:6) .

M & L for granite 18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Rounding edges of stone one edge, such as in steps, cooking platform, window cill and other similar situation.

S&F in repairs 20mm dia aluminium anodised tubular towel rail, D type, 60cm long between flanges.

Taking up or down steel tubing 15mm bore and connections including removing from site

All as per item No, 60.00 here in before but 20 mm bore pipe.

M&L for 15mm dia unplasticised PVC pipes of pressure rating 10 KGf/cm2 with all necessary fittings fixed complete to walls, ceilings or in floors etc including brass threaded fittings to fix taps/stop valve etc. Make: Prince, Supreme, Finolex, Jindal

M&L for 20mm dia unplasticised PVC pipes of pressure rating 10 KGf/cm2 with all necessary fittings fixed complete to walls, ceilings or in floors etc including brass threaded fittings to fix taps/stop valve etc. Make: Prince, Supreme, Finolex, Jindal

S & F PVC connection 45 cm long 15 mm bore with 2 Nos PTMT check nuts.

S & F in repairs vitreous china wash down water closet pan Pedestal any colour including fixing bolts etc including PVC seat cover white with flat PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc complete all as specified and direcrted.

S&F in repairs vitreous china wash hand basin (Under counter or over counter), white, 550x 400mm flat back including providing CI brackets, PVC waste pipe 32mm dia, CP brass waste coupling 32mm dia etc, 15mm bore CP fancy type pillar tap all as specified and directed.

S&F vitreous china bowl urinal flat back size of 465X335X265mm white (Minimum) with grating and union for discharge pipe including 32mm dia waste coupling, 15mm dia fancy type Chromium plated stop cock, 15mm dia 450mm long PVC Connection.

S&F in repairs PVC (SWR) floor trap, dia of outlet 75mm, plain with grating including jointing with solvent cement.

S&F Stainless steel grating with ring 100mm dia

S&F stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe of for unions of bore 15mm complete all as specified.but fancy type, chromium plated

S&F in repairs Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed but fancy type chromium plated

S&F 15 mm bore, two way bib tap, long body, fancy type, brass chromium plated, with crutch handle, screwed down for iron pipe and fixed etc. complete all as specified.

S&F brass 15mm dia CP hand shower (health faucet) with 1.2 m long flexible tube and wall hook as specified.

S&F in repairs brass Chromium plated fancy type Toilet paper holder of fixed to walls with chromium plated (CP) brass screws

S&F in repair brass Chromium plated fancy type Soap dish fixed to wall with Chromium plated brass screws

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

Dismantling cast iron work of any description

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall of size 110mm bore

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall of size 150mm bore

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors of size 110mm bore complete all as directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floor of 75mm bore

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, joints fixed to wall of 75mm bore

S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore

S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore

S&F PVC (SWR) bends any radius 110 mm bore

S&F PVC (SWR) bends any radius 75 mm bore

S &F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm Bore

S &F PVC (SWR) branch piece, single (single Y) equal or unequal 75mm Bore

S &F PVC (SWR) branch piece, double (Double Y) equal or unequal 75mm Bore

S & F PVC (SWR) vent cowl 110mm Bore

S & F PVC (SWR) vent cowl 75mm Bore

S&F PVC (SWR) gully traps 125/100 setting and jointed in cement solvent.

S & F in repairs gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of 20mm bore.

S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20mm bore.

Dismantling water tanks exc 250 but N exc 500 lts capacity including disconnecting water supply pipes and removing from to store all as specified

S&F PVC water storage tank 500 Litrs capacity ISI marked rotational moulded double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of 500 ltrs capacity.

Removal of entire existing water proofing treatment in any position including tarfelt plaster, lean concrete , gravels etc and removing the debirs out side MD land all as pecified and directed.

M&L for 10 mm thick rendering in CM 1:4 over concrete surfaces (Roof) mixed with water proofing compound @ 3% by weight of cement complete all as specified. Note: Water Proofing compound shall be measured and paid for seprately as "Supply Only"

M & L for APP based polymeric membrane minimum weight 3 Kgs/Sqm and minimum 3 mm thick reinforced with polyster non-woven fabric ( wt not less than 150 gms/sqm laid over primed surface with bituminous primer conforming to IS- 3384 @ 0.3 litre/sqm and finishing with preventive coat with aluminium paint @ 100m/sqm all as directed and specified including vertical surface.

Supply only WPC.

Pre-painted galvalume sheet of roof tile pattern/ any pattern approved by GE ( aluminium,Zinc and silicon coating) GI based, minimum thickness 0.50 mm of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screw as directed by Engineer-in-Charge.

S&F crimp eaves of Pre-painted galvalume sheet ( aluminium,Zinc and silicon coating) GI based, minimum thickness 0.5 mm of approved colour having tensile strength of 550 Mpa as in roof covering , fixed with self tapping screw including ridges and crimp eaves as directed by Engineer-in-Charge.

S& F 1.25 mm plain galvanised , mild steel sheeting in valley gutter drip and straight flashing length and girth as fixed

S&F mild steel of grade Fe-290 (Grade E-165) in bands, straps, supports or stays for rain water, ventilating pipes including bolts, if required, clamps, hold fasts, wall ties and similar small articles.

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw/self tapping screw and washer in roof, wall or vertical surface.

M&L for Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafter and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Gde Fe 410 W

SPECIAL ITEM OF WORK (B/R PORTION) S&F of mineral fibre acoustic suspended ceiling system with prima fine fissured (K2C2) tile with semi concealed grid , the tile should have humidity resistance (RH) of 99% , NRC upto 0.6, light reflectance> 83%, thermal conductivity K= 0.052 to 0.057 w/m, colour white fire performance class O/class 1 (BS476 part6 &7) in module sizeof 600x 600x16 mm with Bio block coating on the face of the tile, impact resistant and suitable for green bldg application, eith recycled contentof 63 %. The tile shall be laid on semi concealed grid system with 15 mm white flange incorporating 6 mm central reveal in white/black colour and with web height of 38 mm and load carring capacity of minimum 11.68 kg/sqm.Silhouette. main runner and cross tees to have mitred ends & birdmouth notches to provide mitred cruciform junction. The T sections have galvanising of 120 gms/sqm and passed through 500 hrs of salt test. the tile and grid system used together should carry a 15 year warrantee ( Make : armstrong, saint Gobain)

E/M SERVICES Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc all as specified and as directed.

Taking down sub main wiring complete including fitting and fixtures, removing materials for taking credit and making good disturbed surfaces of walls, floors, roof etc, all as specified and as directed.

Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as directed.

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through heavy duty PVC casing capping fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly including concealed modular flush boxes including modular cover plates with frame mounting for housing the switches, socket outlets etc, all as specified and directed . (a) One light point controlled by one way switch.

(b) One Fan/Exhaust fan point controlled by one way switch.

(c) One 3 pin switch socket outlet point 5 Amps on independent board.

(d) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size.

S & Fix modular switch, single pole,one way 6 Amps capacity

S & Fix modular switch, single pole, one way 16 Amps capacity

S & Fix modular socket, outlet 2 in 1, 6 Amp capacity

S & Fix modular, socket 6A/16A 2 in1, 16 Amp capacity

S & Fix ceiling rose surface backlite 65x50mm 3 terminals complete.

S & Fix modular fan regulator electronic 2 modular type volts AC 50 HZ ,100 Watts, 4 step complete all as directed.

S & Fix LED Batten suitable for mount LED tube rod 1 x 18 watts including necessary electric connections with flexible copper cable 23/0.0076 from ceiling rose to tube light fitting complete all as specifed and directed by Engineer-in-charge. Cat Part No - BLRB-DB 118 or eqvt in Wipro/Havell/Crompton.

S & Fix LED tube light rod 18 watts with necessary fixing arrangement etc complete all as specifed and directed by Engineer-in-charge. Make - Bajaj Cat Part No - BLRB-DB 18CW LED or eqvt in Wipro/Havell/Crompton.

S & Fix Batten for LED tube light fitting 10 W complete accessories all as specified and directed by Engr-in- charge Make:- Bajaj, Cat part no-BCLSB 10 WH or eqvt in Wipro/Havell/Crompton.

S & Fix LED efficient LED recessed mounting fitting 2' X 2' luminaire to enhance the delight of occupents with comfortable experience through its classic design & glare free soft illumination all as specified & directed Make - Bajaj Cat Part No - BZRSQL 36W GZ1 WH or eqvt in Wipro/Havell/Crompton.

S & Fix sheet metal enclosure distribution board SPN 12 way 240 volts with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed.

S & Fix sheet metal enclosure distribution board SPN 8 way 240 volts with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed.

S & Fix sheet metal enclosure distribution board SPN 4 ways 240 volts with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed.

S & Fix sheet metal enclosure distribution board SPN 2 ways 240 volts with IP 43 protection and single door, suitable for mounting MCBs all as specified and as directed.

S & Fix sheet metal enclosure MCCB DB VTPN double door 4 way suitable for 415 V with 200 amps rated bus bar including flushed on walls and making good disturbed surfaces all as specified and as directed.

S & Fix MCB single pole, 240 volts, 6 to 40 Amps, all as specified and as directed.

S & Fix MCB single pole & neutral, 240 volts, 6 to 40 Amps, all as specified and as directed.

S & Fix MCCB , 4 pole, 415 volts,16 KA, 100 Amps, all as specified and as directed.

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC conduit /Casing caping fixed to walls / roofs / floors / ceiling etc with its accessories all as specified and directed by Engr-in -charge for the following. (a) 2x1.5 sq mm and 1x1.5 sq mm as earth wire

(b) 2x2.5 sq mm and 1x2.5 sq mm as earth wire

(c) 2x4 sq mm and 1x4 sq mm as earth wire

(d) 2x6 sq mm and 1x6 sq mm as earth wire

Taking down and refixing of Ceiling fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer.

S & Fix for ceiling fan down rods 1.0 M Long of 15 mm dia GI pipe to the existing trusses of any height including necessary welding & fixing with clamps and nut bolts etc complete all as specified and as directed.

S & Fix PVC body Exhaust fan AC single phase 220 to 240 volts 1250 RPM of size 250 mm sweep Including fixing arrengenment in wall, ventilator etc complete all as specified & directed.

S & Fix LAN socket connecter RJ45 with socket with copper feed modular type all as directed by Eng in Chrage.

M & L for taking out Split type air conditioner indoor and outdoor unit complete with copper tubing of any size and make for shifting at other place after making necessary opening size, core cutting of wall any type/ thickness and fixing of AC after necessary servicing, GAS Charging making suitable arrangement for fixing of AC complete all as specified and directed.

S & Fix capillary tube special annealed double wound copper tubing suitable for 1.5/1.8/2 ton table top type air conditioner of diameter 0.25 " bore as per existing complete all as specified and directed.

Cutting holes by core cutting machine or other mean into or through cement concrete slabs, chajjas, reinforced or otherwise, brick / stone masnary walls etc. cutting area n. exe. 100 sqcm and making good disturbed surfaces

S & Fix Single pole and neutral enclouser with two pin and earthplug and socket complete with one single pole MCB with 240 V 20 AMPs.

S & Fix Highbay light fitting IP 65 luminaire with high efficiency complete of capacity 100 Watts and fixing on roof / chanel with clamps, nuts, bolts all as directed Make : Havells SAUCERGENXPROHBP100WLED757P90DBOLTG or eqvt in wipro/Bajaj

S & Fix LED street light 25 W CUB type building security light pressure die cast aluminium housing LED street light lumaniries with IP 65 and including bracket, nut,bolt,clamp etc complete all accessories and fixing arrengenment all as specified and directed by Engr-in-charge.

S & Fix wall mounted Air cerculator fans 230 volts, metal body single phase oscillating 450 mm sweep suitable for wall mounted.

M & L for earthing complete with galvanised steel earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less that 1.5 M below normal grouond level connected to GI earth wire 4 mm dia by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No 03 of SSR Part-I connected to earthing test point / DB including excavation / earth work in any type of strata, removal of surplus earth, GI pipe for watering pipe withand funnel, PCC 1:3:6 Type C-1 chamber with 40mm thick RCC 1:2:4 type B-1 in cover slab with TMT bars @ 150mm c/c both way with GI protection pipe complete all as specified and directed by Engineer-in-Charge.

EXTERNAL ELECTRIFICATION Taking down carefully unservicable XLPE Cable any type and size completely& making good disturbed surfaces complete all as directed by Enginee-in-charge

Supply and Laying and testing cable XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm , 3.5 core cable connecting lugs, glands,jointing materials etc, laid on wall, floors, roof, ducts and fixing using clamps, saddle complete all as directed by Eng-in-charge of following.

Supply and Laying and testing cable XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 4 sqmm , 3 core cable connecting lugs, glands,jointing materials etc, laid on wall, floors, roof, chanel, ducts and fixing using clamps, saddle complete all as directed by Eng-in-charge of following.

M/S OMSAI ENTERPRISES

OM GANESH CONSTRUCTION

M/S P D TUPE