TP1-30/2025-26 OF CE/TP-I/CNI

Amount

Clearing juliflora jungle with uprooting including all cost of labour ,lead, lift etc., complete.

Earth work excavation for foundation in ordinary soil with lead of 10 to 100 m and lift of 3m in sand, silt or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loom and ordinary soil including excavated earth. In Hard stiff clay, stiff black cotton, hard red earth,, shales, murram, stoney earth and earth mixed with small size boulders SS 20 B

Earth work excavation for foundation in ordinary soil with lead of 10 to 100 m and lift of 3m in sand, silt or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loom and ordinary soil including excavated earth. Soft disintegrated rock not requirng blasting

Earth work excavation for foundation in ordinary soil with lead of 10 to 100 m and lift of 3m in sand, silt or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loom and ordinary soil including excavated earth. In Medium rock and dense medium rock not requiring blasting

Earth work excavation for foundation in ordinary soil with lead of 10 to 100 m and lift of 3m in sand, silt or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loom and ordinary soil including excavated earth. Removal of hard rock by wedging and chiselling and trimming to proper shape

Supplying and filling in foundation and basement with filling sand in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification

Transporting the surplus excavated earth, debris etc away from the site to a lead of 5km including cost of all lead, lift, conveyance , loading, unloading etc. complete

Re filling in foundation with excavated earth in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification

Laying PCC 1:3:6 mix using 20mm HBG machine crushed metal for foundation matt concrete including cost of all labour, materials, lead, lift, curing etc. Complete.

R:C:C 1:1.5:3 using 12 to 20mm metal without form work including cost of all materials,curing, labour, lead, lift etc. complete. as per standard specification as directed by the dept. Engineer at site.

P:C:C 1:2:4 using 12 to 20mm HBG metal without form work including cost of all materials, curing, labour, lead, lift etc. complete. as per standard specification as directed by the dept. Engineer at site.

PCC 1:2:4 mix using 20mm downgraded HBG machine crushed metal for foundation concrete including form work, cost of all labour, materials, lead, lift, curing etc. complete as per standard specification.

R:C:C 1:1.5:3 using 12 to 20mm HBG metal with form work including cost of all materials, curing, labour, lead, lift etc. complete. as per standard specification as directed by the dept. Engineer at site.

Brick work in CM 1:5 using all ll Class Ground Moulded Chamber Burnt bricks 9"x4 3/8" x 2 3/4" including the cost of all materilas , lead, lift, labour, Centering Charges T&P etc., complete as directed by the Engineers at site.

Brick work in CM 1:6 using all ll Class Ground Moulded Chamber Burnt bricks 9"x4 3/8" x 2 3/4" including the cost of all materilas , lead, lift, labour, Centering Charges T&P etc., complete as directed by the Engineers at site.

Plastering with cm 1:5 mix using 20mm thick for inside & outside walls including cost of all materials, labour, lead, lift etc complete

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyviny Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from unplasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. - M-0673

Paving the floor with acid resistant tiles (quality, colour and shade as directed by the engineer at site) of size 305 mm x 305mm x 6 mm in battery room over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement

Dadooing walls with Acid proof tiles of size 150x150x6mm laid in C.M (1:2 ) 20mm thick and pointing with white cement using 0.40 Kg. Sq.m approved colour and quality as directed by the engineer at site including cost of all materials lead lift labour etc. complete.

Painting 2 coats using white cement over acid proof paint - one coat of priming coat for ceiling in all floors and exposed faces of beams including cost of all materials and scaffolding etc. complete.

Wiring with 2x1.5sqmm (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch box and 5A F.T. Switch in flush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour continuous earth wire connection of 14 SWG TC wire for light point / Fan point or Electronic Regulator.

Supplying and fixing box type 4'-40w single flouresent fitting complete with copper choke and condenser 1 no 4'-40w tube with t.w. round block on wall or ceiling with pvc unsheated leads from terminals to the fittings with tube

Supplying and fixing of 1400mm sweep ac ceiling fan wit regulator with 300mm down rod on the exisitng clamps of approved make and colour including cost of all materials lead, lift etc., complete.

Supplying and fixing of water tight Bulk head fitting with guard and approved suitable make for incondescent lamp with guard and 100 w bulb.

Fabrication, supplying and erection of M.S. grill for ornamental gate, windows as per standard specification approved by the engineer at site including cost of all materials, welding, painting with two coats of enamel paint over one coat of red oxide primer including cost of all materials, labour, lead, lift, etc. complete.

Supplying and tying chain link size 50mm Sq. 2.1 m ht PVC coated including cost of all materials, labour, lead, lift etc.complete.

Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire etc.complete.

Fabriaction, galvanising and supply of foundation bolt and nuts with 2 nos.washer in High Tensile Steel including 10 cm L at bottom and 15 cm threading with 2 nuts and washers at top including cost of all materials, labour, lead, lift etc. complete.as directed by the dept. Engineer at site

Providing Grout holes for equipment structures including cost of all materials, form work , labour, lead, lift etc. complete.

Fabrication of Template and assembling in correct position for various equipment plinth and grouting the foundation bolts including cost of all materials, labour, lead, lift etc. complete.as directed by the dept. Engineer at site

Plastering with cm 1:5 mix using 20mm thick for inside & outside walls including cost of all materials, labour, lead, lift etc complete

Supplying and fixing GM wheel valve of approved brand (leader) ISI quality including cost of all materials, labour etc. complete 32mm

Supplying and fixing GM wheel valve of approved brand (leader) ISI quality including cost of all materials, labour etc. complete 25mm

Supplying and fixing GM wheel valve of approved brand (leader) ISI quality including cost of all materials, labour etc. complete 20mm

Providing and laying PVC high density pipe including cost of all specials like coupling, bend etc., and including necessary earthwork and burrying , all material labour, etc., complete. 32MM DIA PVC PIPE

Providing and laying PVC high density pipe including cost of all specials like coupling, bend etc., and including necessary earthwork and burrying , all material labour, etc., complete. 25MM DIA PVC PIPE

Providing and laying PVC high density pipe including cost of all specials like coupling, bend etc., and including necessary earthwork and burrying , all material labour, etc., complete. 20MM DIA PVC PIPE

Levelling the ups and downs of the location by engaging JCB for marking of foundations, etc., with all hire charges etc complete.

Colour washing and Painting 2 coats with approved Plastic Emulsion paint over one priming coat of plastic emulsion paint over cement plastered wall surface, ceiling and other new surface and including cleaning , preparing the surface and curing etc.complete.

Painting new iron works with two coats synthetic enamel paint over one coat of primer including cost of all materials, lead, lift, etc., complete.

Supplying and fixing MS Channel, angle, channel,, MS rail, MS chequered plate, etc wherever required as directed by the Engineer as per standard specifcation - MS Channel & angle

Filling with good quality gravel including cost of material, labour all lead and lift etc . Complete.

Filling with stone dust including cost of metal ,labour all lead and lift etc. Complete.

Filling with 20 mm B.G metal including cost of metal ,labour all lead and lift etc . Complete.

Supplying and fabrication, transporting of various equipment lattice structures inclduing cost of all materials, labour, lead, lift, hot dipped galvanising, etc., complete and as directed by the Department Enigneer at site.

Supply of Hot dip galvanised bolts and nuts as per IS conforming to latest issue and as detailed in the specification (Various size)

Labour charges for erection of towers and tower extensions including sorting out of tower parts, tightening, punching of bolts and nuts and rectification of defects if any during erection of one coat of zinc rich primer, 2 coats of zinc rich enamel paint, cost of all materials, labour lead, lift, etc., complete and as directed by the Department Engineer at site.

CGST in % (For Bidders inside TamilNadu)

SGST in % (For Bidders inside TamilNadu)

IGST in % (For Bidders outside TamilNadu)

K.RAMESH (BID ID -1394097)