PROVN OF 121 RUNNING MTR INTERLOCKING PATHWAY FOR BLDG NO. P-25, P-26, P-27 AND P-29 AT KRIMCHI COMPLEX, TILING AND PANELLING AT BLDG NO. P-32 OF 5071 ASC BN (MT) AND ADDN ALTN TO EXISTING SEWAGE LINE, SEPTIC TANK, PATH AND OTHER ALLIED WORKS AT

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo, dado and skirting etc. and removing serviceable tiles to store and rubbish off the premises etc, complete all as specified and directed.

M&L for 7-8mm thick non skid coloured ceramic tiles, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm each as in floors, skirtings etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid/ fixed over and including 10mm thick bedding layer/ plaster in CM 1:4, complete all as specified and directed.

M&L for 10mm thick vitrified ceramic tiles of any colour as approved, square or rectangular, poliahed, area of each tile not exc 0.36 Sqm each as in floors, skirtings etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick bedding layer/ plaster in CM 1:4, complete all as specified and directed.

M&L for glazed ceramic coloured tiles, size 450x300x7mm / 350x250x7mm as on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

Taking down cement plaster on brick walls, stone masonry / walls, concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:3 as on ceiling, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 50mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, laid in alternate ways (not exc 2.0 Sqm each) and finished the surface even and smooth without using extra cement, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame), area exc 1.50 Sqm but not exc 4.0 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

S&F pressed steel frame for doors with one or more rebates including necessary lugs, hinges, lock strike plate etc. complete, frame size 105mm x 60mm, complete all as specified and directed.

S&F 35mm thick factory made 2nd class hardwood rail and style, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-l), kiln seasoned and chemically pressure treated, complete all as specified and directed.

All as per serial item No. 12.00 here-in-above but glazed and skeleton shutter with sash bar for glass / wire gauge.

M&L for plain cement concrete 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregates) for filling in the pressed steel door frame/ hold fast etc, complete all as specified and directed.

S&F aluminuim anodised barrel tower bolts with bright both, size 150mm long, complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F 150mm long alunminium handle, cast type, oval shape, complete all as specified and directed.

M&L for preparation of new wooden surfaces exceeding 10cms width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M&L for preparation of new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over preprimered surface, complete all as specified and directed.

S&F in replacement of vitreous china wash down water closet pan 'P' or 'S' trap (pedestal pattern) white including fixing bolts and connection trap etc. to drain pipe (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc, complete all as specified and directed.

S&F in replacement of 10 Ltrs capacity PVC valveless syphonic action type flushing cistern, low level, white with inlet including bracket and 32mm dia flush pipe of polythylene ball valve, float and handle of low or high density and including 15mm dia PVC connection pipe of 450mm long, complete all as specified and directed.

Demolition of brick work or stone boulder masonery, built in cement mortor including all quoins, arches, pillars etc, complete all as specified and directed.

M&L for brick work with sub class ‘B’, old size bricks, straight or curved on plan exc 6 mtr mean radius, built in CM 1:6, complete all as specified and directed.

S&F in replacement of viterous china wash hand basin, pedestal type, white, flat back of size 550mm x 400mm including CP waste couping of 32mm dia, chain and plug and porcelan stopper and Cl brackets of angle iron of size 65x65x6mm, embedded in PCC block with PCC 1:2:4 type B-1 and including 450mm long PVC waste pipe of 32mm dia and getting with holes, complete all as specified and directed.

S&F in replacement of pillar tap, cast copper alloy, fancy type with capstan head, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed to 15mm bore iron pipe, complete all as specified and directed.

S&F PVC connection of 15mm dia with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in replacement of 20mm dia brass chromium plated tubular towel rail, 'D' type, 60cm long between flanges, fixed with SS screws, complete all as specified and directed.

S&F in replacement of stainless steel tubular depray rod of 28mm dia as per sample kept in GE's Office, complete as specified and directed.

S&F stainless steel brackets, suitable for depray rod of 28mm dia as per sample kept in GE's Office, complete as specified and directed.

S&F stainless steel knobs, suitable for depray rod of 28mm dia as per sample kept in GE's Office, complete as specified and directed.

M&L for preparation of new or old decorated surfaces and applying two coats of distemper oil emulsion on walls over a coat of 1mm wall care putty including complete removal of existimg treatment on old decorated surfaces, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS:15489:2004, alkali & fungal resistance, dirt resistance, exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over a coat of wall care putty over new/old surfaces, complete all as specified and directed.

Taking up or down 15mm bore steel water tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and directed.

S&F 15mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

S&F 20mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

S&F in replacement of stop valve / angle valve, chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends, fixed to 15mm bore iron pipe, complete all as specified and directed.

S&F in replacement of 15mm dia bib tap, cast copper alloy, fancy type, chromium plated with crtuch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F PVC connection of 15mm dia with PTMT nuts of length 600mm, complete all as specified and directed.

S&F PVC waste pipe, suitable for 32mm dia waste coupling for wash hand basin, complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethlene water storage tank (cylindrical vertical with closed top), hoisted and fixed in position including dismantling and removing old tank from site, complete all as specified and directed.

S&F in replacement of ball brass valve, high pressure with polyethene float & fly-nut complete, screwed for 20mm iron pipe or brass ferrule, complete all as specified and directed.

Demolition of cement concrete of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in floors, sub base of floor etc, finished the surface even abd smooth without using extra cement, complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in floors, staircase including steps etc, finished the surface even abd smooth without using extra cement, complete all as specified and directed.

M&L for machine pressed rubber moulded, manufactured / compacted by vibrating table method precast concrete interlocking coloured paver block, glossy finish, any shape, and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments, complete all as specified and directed.

M&L for sand filling under floors, paver blocks or in foundations including watering, ramming and consolidation, complete all as specified and directed.

S&F in replacement of wash hand basin, vitreous china flat back of size 580mm x 450mm (excluding CP pillar tap) including 32mm dia CP waste coupling, 15mm dia 450mm long PVC connection pipe, 32mm dia PVC waste pipe and angle iron brackets of size 30x30x5mm, 450mm long, complete all as specified and directed.

S&F towel ring, fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms), complete all as specified and directed.

S&F galvanised mild steel wire cloth of 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Providing and fixing 30mm thick factory made PVC door shutter, consisting of panel of Hollow PVC Profile of 24mm thickness, consisting of frame made out of MS tubes of 19 gauge thickness and size of 19mmx19mm, inserted inside the hollow section of stiles, top and bottom rails and two 19mmx19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick Prelam PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mmx2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant prelam PVC sheet using solvent cement on both the sides of the panel etc. complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawings, complete all as specified and directed.

Hacking out old broken glass of any thickness, size and quality from wooden frame or steel frame, glazed with putty or fixed with beads, complete all as specified and directed.

S&F 3/4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes in any length with rubber ring joints, fixed to walls at any height with MS clamps of suitable size including taking down old pipe, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes in any length with rubber ring joints, fixed to walls at any height with MS clamps of suitable size including taking down old pipe, complete all as specified and directed.

S&F solid PVC wall lining (wall paneling), consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement & fixing at site on PVC frame, complete all as specified and directed.

S&F in replacement of jet spray, brass, chromium plated, heavy duty including flexible pipe, suitable for 15mm bore water connection for EWC, complete all as specified and directed.

S&F in replacement of shower rose, brass, chromium plated, 125mm dia with or without swivel joint with and including CP brass arm and wall flange, fixing to 15mm bore steel pipe or union, complete all as specified and directed.

S&F in replacement of glass shelf assembly, consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long, complete all as specified and directed.

S&F in replacement of 2 in 1 wall mixer for mixing hot & cold water, suitable for wash hand basin, cast copper alloy with dual capstan heads, chromium plated, screwed down high pressure with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, complete all as specified and directed.

M&L for 18/19mm thick prelaminated particle board, medium density, flat pressed, single layer or three layer type with BWR type adhesive, complete all as specified and directed.

S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flap 30mm when opened, complete all as specified and directed.

S&F hasp and staple, 100mm size, mild steel, safety type, stove enalmelled black including bolt to hinge plate and fixed with screws, complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed.

Excavation in trenches in any type of soil, not exc 1.5 mtr deep and not exc 1.5 mtr wide for foundations, manholes, laying of under ground cable, pipe, electric pole etc. and getting out, complete all as specified and directed.

Returning, filling in including spreading, leveling and well ramming in layers not exc 25cm in thick, complete all as specified and directed.

Removing excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick including watering and ramming to a true surface, complete all as specified and directed.

Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in kerb stones etc, set/ jointed in cement mortar 1:6 including necessary excavation if required at site, complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in lintels upto 1.50 mtr clean span, cills, plinth courses, coping, kneelers, bonders, cobbles bed plates and the like with plain fair faces including necessary formwork and weathering, slightly rounded or chemfered angles and throating including necessary formwork, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, mass concrete, filling in etc, complete all as specified and directed.

M&L for mild steel work for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work, conforming to Fe-290 Gde E-165, complete all as specified and directed.

M&L for preparation of new or previously steel surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L On site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 type D-2 below foundation, vent shaft, connection etc., complete for 5 Users with upflow filter including media, complete all as specified and directed.

M&L for soakage well, excavation in any type of soil, foundation in PCC 1:3:6 type C-1, walls of honey combed masonry with top ring of M-25 Grade cement concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M-25 Grade cement concrete / SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats, size 1.2 mtr X 3.0 mtr dia, complete all as specified and directed. Note :- The soakage well will be constructed as per respective Typical Drawing as available with concern Engineer-in-Charge.

M&L for RCC NP3 150mm diameter pipes, laid on and including 150mm thick cradle PCC 1:4:8 type D-2 bed, excavation and earth work in any type of soil including manholes/ drop manhole of standard size made of brick masonry / RCC / precast RCC with SFRC ventilating cover and frame includeing all items and activities to execute and make sewer line functional, complete all as specified and directed by Engineer-in-Charge. Note :- Excavation and earth work shall be measured and paid separately under respective items of this BOQ.

M&L for RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in slabs supported on wall, beams etc. or similar works, complete all as specified and directed.

M&L for mild steel TMT bars of 8mm dia and over as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia), complete all as specified and as directed.