SPECIAL REPAIRS TO BUILDING NO P-6A OF 2 TR AND CERTAIN SANCTIONED WORKS UNDER GE NASIK ROAD CAMP

Amount

Taking down carefully existing bitumen tarfelt including screed and cleaning of surfaces of roof etc. with wire brush including flashing and junctions of parapets / kerb walls etc. and removing of the rubbish to a distance exc. 500 metres but not exc. 1.5 Km and depositing where directed.

M&L for rendering 15 mm thick in cement mortar (1:4) or fair faces of concrete surfaces mixed with water proofing liquid and smooth finished and smooth (without using extra cement). (Note : WPC will be measured and paid separately).

M&L for Waterproofing on roof including flashing and junctions of parapet, kerb, wall etc. as under:- (a) Applying bituminous primer on cleaned and dried surface @ 0.20 Kg/Sqm. (b) A coat of hot blown type bitumen of grade 85/25, applied hot @ 2.25 Kg/Sqm (c) Laying by thermo fusion (torch applied) 3 mm thick APP based polymeric water proofing membrane weighing not less than 3.5 Kg / Sqm and reinforcement with polyster non woven fabric (not less than 150 gms / Sqm) (d) Painting the exposed APP membrane surface with bituminous paint @ 0.15 Kg / Sqm.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate for filling up the undulation on RCC roof slab, roof kerbs etc to maintain slope all as specified and directed.

M&L for cement concrete 1:2:4 type B-2 as in foundation filling and mass concrete as in post

Excavating in trenches,n exc 1.5 m wide and n exc 1.5m in depth for foundation etc in any type of soils

M&L for PCC 1:4:8 Type D2 (40 mm graded aggregate)as in foundations,filling and mass concrete

M&L for PCC 1:5:10 Type E2 (using 40 mm graded stone aggregate) in sub base of inter locking tiles complete all as specified and directed by Engr-in-Charge.

M&L for brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 with old size bricks.

Returning filling in, including spreading, leveling , watering & well ramming in layer n exc 25 cm

Removing excavated material n. exc 50 m and depositing where directed at a level n. exc 1.50 m above the starting point in soft / loose soil complete all as specified and directed by Engr-in-Charge.

M & L for moorum/ red bajri filling in floors or pavings,laid in layers n exc 15 cm thick, spread, levelled and rammed including watering

M & L for Hardcore of guage n exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to true surface complete all as specified and directed.

M & L for Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers n exc 75 mm thick, watered and rammed to a true surface of broken stone or boulder.

M&L for cement concrete Type D2 1:4:8 (40 mm graded aggregate) 75 mm thick as in sub base

M&L for cement concrete type B-1, 1:2:4 (20 mm graded aggregate) 30 mm thick as in floors As in DPC

M&L for Screed bed or bedding layer of cement mortar (1:6) 15 mm thick for laying floors finishes.

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for rendering 15 mm thick in CM 1:4 on brick masonary wall and surfaces rough finished to receive tiles

M&L for Coloured glazed ceramic tiles 300 x 200 x 7mm thick in vertical surface, set and jointed in neat cement slurry & pointed with coloured cement to match

M&L for rendering 15 mm thick in CM (1: 6) on fair faces of brick work or concrete surfaces finished with thin layer of sagol finish not exceeding 1.5 mm thick.

M&L for preparing surface and applying three coats of white wash on new plastered surfaces of walls.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth with using extra cement

M&L for two coats of cement base paint for external faces of walls including preparation of surfaces.

M&L for precast cement concrete louvres and jalies 25 mm thick Type B0 1:2:4 (12.5mm graded stone aggregate) set in CM 1:6 (measured solid) including all mouldings but excluding frame

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube S&F in opening as per specification and drawing in SSR 2010 Part II

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing in SSR 2010 Part II.

S&F cold rolled stainless steel butt hinges 75mm size medium weight complete all as specified and directed

S&F aluminium alloy barrel tower bolt 150 mm long

S&F 150 mm aluminium alloy handels cast/plate type

S &F Vitreous china bowl urinal flat back ,size of 465x355x265 white (minimum),with grating and union for discharge pipe (excluding flushing cistern,flush pipe and waste pipe)

S&F of vitreous china wash basin,white,flat back,size 450 x 300 mm excluding taps,waste,chain and plug and porcelin stopper but including brackets

S&F of pillar taps of 15 mm bore chromium plated screwed down high pressure with long screwed shanks and fly nuts

S&F for waste fittings, chromium plated of 32 mm dia for urinals

S&F for waste fittings,brass,chromium plated of 32 mm dia for wash basins

S&F of PVC(SWR) floor trap of 75mm dia outlet,plain with grating including jointing with solvent cement

S&F for PVC(SWR) pipes 75mm single socketed in any length with rubber ring joints fixed to walls.

S&F for PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 110mm

S&F of PVC(SWR) bends of 75 mm bore

S&F of PVC(SWR) bends of 110 mm bore

S&F of PVC(SWR) vent cowl of 110 mm bore

S&F Grating doom 100 mm dia of PTMT (Minimum weight 100 gms)

S&F PVC connections 15mm size with PTMT nuts of length 450mm.

S&F for Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors

S&F stop valve, 15mm bore dia PTMT of any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and directed

S&F Ball brass valves, high pressure, with polythene float and flynut for 20 mm bore dia pipe complete,screwed for iron pipe or brass ferrule and fixed

S&F for Gun metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed

Cutting exsisting steel tubing for alternation or addition of 25mm dia GI tubing in position without taking down

Screwing exsisting steel tubing for or addition of 25mm dia GI tubing in position without taking down

Drilling and tapping of exsisting CI water mains in position for branch connection of internal dia 25mm

S&F for 15 mm dia tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed

ditto all as per item No 52 above but 20 mm dia

ditto all as per item No 52 above but 25 mm dia

S&F Rotational moulded poly-ethylene water storage tanks of 500 Ltrs capacity(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I

M&L for cement concrete 1:3:6 Type C1(20 mm graded aggregate) as in plinth protection finished smooth and even without using extra cement and providing bitumen filled joints as directed complete

M&L for providing precast cement concrete kerb stone of 1:3:6 (20 mm graded aggregate) type C1, set in cement mortar 1:4 including rounded or chamfered all as specified and directed.

M & L for reinforced concrete pipes class NP-2 and of dia 150mm laid and jointed complete with collars

M & L for PCC 1:2:4 type B1 (20mm graded stone aggregate) as in surface channels

Extra for forming fair finished drain or channel 30cm inner girth using extra cement incl forms, moulds, mitred/stopped ends etc.

M&L for Providing precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc) chulla hoods, chajjas shelves and similar articles and set in CM 1:4 etc complete all as directed

M&L for mild steel TMT bars 8mm dia cut to length bent to shape required and binding with ms wire anealed not less than 0.9mm dia, complete all as spacified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required.

M&L for 20mm thick granite jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing complete as in partition walls

S&F steel work in tublar purlins post, rafter including necessary cutting welding etc complete

M&L for two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width not exc 10cm including preparation of surfaces

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified

Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil

Excavation in post holes (or similar holes) each not exc. 0.5 m getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm watering and removing surplus soil to a distance n. exc 50 m and making good surfaces in soft / loose soil.

M&L for 75 mm thick Cement Concrete type C2, 1:3:6 (Using 40 mm graded stone aggregate) in hard standing / plinth protections, finished even and smooth with using extra cement.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 and rendering is to be finished even and smooth without using extra cement.

S&F rolled mild steel plain angle cleats and plate for securing purlins to rafter and similar small articles confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

M&L for M-30 precast coloured cement concrete interlocking paving tiles 60 mm thick rubber moulded as in pavement laid on and including 30mm thick stone dust cushion laid dry to the profile all as per manufacturers instructions complete all as specified and directed by the Engineer-in-Charge.

M&L for rubber moulded machine pressed precast inter locking paver block with gray cement any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-25 grade laid on 30 mm thick stone dust cushioning laid dry to the profile all as specified and directed.

S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and or riveted, or forget into spikes : framed guard bars ; barred iron doors ; ladders ; framed balusters ; walk ways ; railings ; framework of water tanks and similar work conforming to Fe 410-0 or Fe-310-0 with framed and jung as gates, including pintle hinges, stops, hand-made sliding bolts etc.,

M&L for two coats of synthetic enamel paint over a coat of red oxide on steel surfaces girth or width exc 10 cm including preparation of surfaces complete all as specified and directed.

M&L for preparation of new surfaces of brick, stone, concrete, AC or plastered surfaces of any description over 10 cm girth or width, not otherwise described and applying two coats of synthetic enamel (ordinary tint) over a coat of priming paint plaster complete all as specified and directed by Engr-in-Charge.

Dismantling existing tanks exc 500 ltr setting a side (or lowing if required) for repairs, cleaning etc, and hoisting if required reconnecting and refixing in position (cleaning, repairing etc measured separately).

Taking up or down 25 mm tubes galvanised iron and removing / shifting from site including cleaening for refixing where directed.

All as per item No 80 above but 20 mm tubes.

All as per item No 80 above but 15 mm tubes.

Refixing only 25 mm tubes galvanised iron and connection fixed to valve, or laid in floor supplying and fixing such socket, bends, elbows, nipple, union etc.

All as per item No 83 above but 20 mm tubes.

All as per item No 83 above but 15 mm tubes.

M/S SAMEER SUBHASH PATANI

Alpha Construction

Bidder Name

M/S SAMEER SUBHASH PATANI

M/S K. K. Construction

Alpha Construction