Repairs and Renovation of Arulmigu Agatheeswarar Thirukoil at Aththi in Cheyyar Taluk of Tiruvannamalai District

Amount

Scaffolding charges for Vimanams and Gopurams with casurina posts coconut or palm trees wherever necessary for main, form work and providing with non flamable shaded coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work. etc complete complying with standard specification and as directed by departmental officers.50'0 height.

Scraping the old plastering surface of vimanams carefully including isolated bricks or brick work without damaging the vari vargams, racking out the joints, cleaning the surfaces with water including all working in heights, hire charges for special tools, brushes etc complete complying with standard specification and as directed by the departmental officers.

Painting with multicolour (Panchavarnam) best quality water exterior Emulsion paints complete for the Vimanams/Gopurams, inculding cost and conveyence of all materials, labour charges inculding Artist painter, working in heights, lifting of material, cost of brushes etc, complete-which including all extra for foldings-100sft, superficial area. etc., complete complying with standard specification and as directed by the departmental officers

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat with approved primer including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Restoration by providing herbal water wash(Combination of Venthayam powder 20%, Siyakai Powder 10%, Arapu powder 5%, Boonthi kottai powder 50%, Arugampul powder 3%, Nannari ver powder 3%, Vettiver powder 3%, Korai kizhangu powder 3%, and sembaruthi leaf powder 3% total 100%) are used for removel of lime wash on stone and oil smudge) and approrimats methodology to restore the originalities of the existing granite structure inclusive of hire charges scaffolding arrangements conveyance charges for tools & plants and machinaries to the workship spot and cleaning the site after completion of work etc complete complying with standard specification and as directed by the departmental officers.

Pointing the stone joints with lime moratar 1:1.5(One lime and one & half crushed stone sand ) including cost and conveyance of all materials and all labour charges etc complete complying with standard specification and as directed by departmental officers.

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying & Paving flooring with cut stone of size 600 mm X 600 mm and another sizes suitable for site conditions with machine cut edges and not less than 100mm thick and top surface dressed as directed by the departmental officers and pointing with special grinding lime Mortar 1:1.5 ( one lime and one & half M.sand ) including cost and conveyance of all materials etc., complete Complying with standard specifications. and directed by the departmental officers (The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)

Supplying & fixing Temple Pattern Ornamental Doors with high quality teakwood (country) with 2” minimum to 7” maximum thick Ornamental Frames, 2” thick to 5” thick Kamala (Flower Planks), Creeper, Birds, Animal Figures, Sculptures, etc. Backside 1” thick to 3” plank including necessary carving, shaping, wastage, etc., as per approved plan and design. including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc. complete complying with standard specification and as directed by the departmental officers.

Painting new wood work with two finishing coats of first quality synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat with approved primer in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete complying with standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in lime Mortar 1:1.5 (One lime and one and half Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in 35 mm X 45 mm powder coated Duct on wall , on pillars with suitable MS flat clamps and ceiling with accessories with module GI switch box in flush with wall with 6A one way module switch with module front plate withpainting of suitable colour for open PVC light point / Fan Point (For electronic regulator) (5 Points Per Coil) higher end (Data -A)

Supply and fixing of 4'-20w LED battern on wall or cealing or existing duct with copper leads from fittings to terminals to the fitting with clamp(Data B)

Supply and fixing of 7 W/9W LED for BH point .(Data C)

Supply and fixing of 450 mm 18 " Wall Fan with Pillar Clamp 1 1/2 X 1/4 MS flat with bolt and nuts for fixing the Fan on pillar with necessary connection.( Higher end -like Almonard/equivalent ) ( Data D)

Supply and run of 35 mm X 20 mm powder coated duct with door arrangements complete with MS angle and bolt & nuts comple . ( Data E)

Supply and run of MS flat for clamps of size 2' X 1' on pillar with suitable Bolt / nuts and painting of suitable colour . ( Data F)

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour (SD 56)

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.(SD 413)

Supply and fixing of 2 nos.6A two module 5 pin socket , 2 nos. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End (SD 466)

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End (SD 484)

Supply and fixing of 30W LED focus fitting complete on suitable MS angle with suitable MS clamp ( For Urchavar and Guru Bhagavan sannathy outer) ( Data G)

Supply and fixing of Gate light fitting complete with 15 W/20W LED clear CORN bulb ( Warm white ) ( B22 base) on the existing pillar / wall with 3 core 1.5 sq.mm copper flexible cable from the fittings to the terminals .( Make GEM lights/eql) ( Data 11)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD 611)

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End (SD 652)

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .( SD535)

Supply and fixing of sintex box (SMC) with 1 no.6-32 A SP MCB , 16 A bakelite connector on a hylem sheet in inter connections complete .( For street light lights/focus/flood lights) ( Data I)

Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. ( SD 746)

Supply and clamping of 3 1/2 X 25 Sq.mm PVC armoured LTUG armoured Alu cable on post or on wall with MS Clamps ( SD 222 )

Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection (SD 186)

Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (SD 235)

Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (SD 744)

Supply and clamping of 4 X 10 Sq.mm PVC armoured LTUG armoured Alu cable on post or on wall with MS Clamps ( SD 220 )

Supply and fixing of brass cable gland for 4 x 16/4X10 sq.mm. LTUG armoured cable with earth connection (SD 185)

Supply and Laying of 2 X6 sq.mm PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling tha earth to make good. ( Data J)

Supply and clarnping of 2 x 6 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD 215)

Supply and fixing of brass cable gland for 2 x 6 sq.mm. PVC LTUG armoured cable with earth connection (SD 181)

Supply and fixing of 63 A ( 500V) three phase meter box fabricated with 16 SWG CRCA sheet comprising of with 3 nos. of 63A fuse units,1 no.63A 30 mA FP ELCB ,provision for fixing TNEB meter with inter connections and with required accessories on wall complete (Data K)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry( SD 233 )

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection (SD 458)

SUB TOTAL

R RAJASEKARAN (BID ID -1165131)