REPAIR MAINT AND PAINTING OF STEEL FURNITURE AT CHAKABAMA MIL STN

Amount

CHARPOY WITH HARD TOP (DRG NO-FD/MAP-II/01)

Removing the existing unserviceable /broken ply wood top and supply and fixing new 12 mm thick BWR plywood top all as shown on Drg and as specified and directed . Make : Greenply / Kitply / Century

BED HARD STEEL NEW MAP (DRG NO-FD/MAP/E6/08(R))

Removing the existing unserviceable /broken ply wood top and supply and fixing new 12 mm thick BWR plywood top all as shown on Drg and as specified and directed Make : Greenply Industri/ Kitply / Century

ALMIRAH STEEL LARGE/ MEDIUM GLAZED(FD-67,FD-1031, FD-1032,FD-1034)

Replacement of existing unserviceable handle by providing new Mild Steel chromium plated handle of standard size including nuts and washers of almirah large/medium steel best quality as approved all as specified and directed.

Taking down/dismantling existing unserviceable shelves of steel almirah large and replace with new shelves made out of 1 mm thick M.S. sheet bent to shape as per existing and fixed by welding/ riveting and painting complete all as directed. FOR ALMIRAH LARGE

Taking down/dismantling existing unserviceable shelves and replace with new shelves made out of 1 mm thick M.S. sheet bent to shape as per existing one and fixed by welding / riveting and painting complete all as directed. FOR ALMIRAH MEDIUM

Taking down/dismantling existing unserviceable 3-Way locking system of steel almirah large and replace with new 3-Way locking system all as directed FOR ALMIRAH LARGE

Taking down/dismantling existing unserviceable 3-Way locking system of steel almirah medium and replace with new 3-Way locking system all as directed FOR ALMIRAH MEDIUM

Removing the old welding spots from broken welding joints and re-welding in the same place as required.

LOCKERS STEEL (FD-57, FD-1029)

Taking down/dismantling existing unserviceable hinges and replace with new hinges made out of 2 mm thick M.S. sheet bent to shape required to match with existing and fixed complete.

S&F safety hasp and staple chromium plated 75 x 40 x 3 mm thick for steel locker including taking out old one all as shown on drg and as directed.

S&F chromium plated MS handle 100mm long for steel lockers including taking out old one all as shown on drg and as directed by Engr –in-Charge.

Taking out old leg and S&F of new legs made out from 1.00mm thick MS black steel sheet including bend to shape and applying two coats of 1st quality synthetic enamel paints (light grey or OG colour) over a coat of anti-corrosive metal primer complete all as directed.

Removing the old welding spots from broken welding joints and re-welding in the same place as required.

TABLE STEEL

S&F of following new table top 19mm thick veneered particle board. Veneered finished on one side solid core, interior grade with teak wood beading on all sides. The top shall be fixed with frame by chromium plated screw including taking out old one all as shown on drawing drg and as directed. TABLE OFFICE TYPIST/CLERK (FD-381& FD-1004 )

S&F of following new table top 19mm thick veneered particle board. Veneered finished on one side solid core, interior grade with teak wood beading on all sides. The top shall be fixed with frame by chromium plated screw including taking out old one all as shown on drawing drg and as directed. TABLE OFFICE OFFICERS .(FD-84,FD-1003 )

Taking down/dismantling existing unserviceable drawer and replace with new drawer made out of 1 mm thick M.S. sheet including tinkering/ denting, painting, welding etc. all as shown on drawing and as directed. TABLE OFFICE TYPIST/CLERK (FD-381& FD-1004)

Taking down / dismantling existing unserviceable drawer and replace with new drawer made out of 1 mm thick M.S. sheet including tinkering/ denting, painting, welding etc. all as shown on drawing and as directed. TABLE OFFICE OFFICERS (FD-84,FD-1003 )

S&F Table drawer shutter of size 40 cm x 36 cm made out from 1mm thick MS Black sheet with drawer lock including gas welding and two coated of spray painting of Og paint over a coat of red oxide primer for table office officer including taking out old shutter all as shown in drg and as directed.

DINING TABLE ALUMINIUM TOP (DRG NO FD-165M)

Removal of u/s Top of table and supply and fixing new top of size 1800x600x18mm made out of MDF board (Ext Gde) covered from all side with Aluminium sheet 22 gauge thick covered alround . Top fixed with steel screw of required size complete all as directed.

Taking down/dismantling unserviceable leg for table dining and replace with new leg made out of 25 mm x 25 mm hollow square bare, 75 cm long including painting as per existing one to match with surrounding surface complete all as directed.

Removing the old welding spots from broken welding joints and re-welding in the same place as required.

CHAIR CB STEEL (DRG NO FD-75 M)

Removing the existing unserviceable/ broken Arms rest for chair CB steel with arms and supply and fix new Arms rest of size 420 X 50 X 20mm 1st class hard wood made to complete all as specified & shown on drg including french polishing to exposed surfaces all as directed.

Removing existing unserviceable seats & back from Chair CB steel and supply & fix of new seat & back sheet of size 41 cm of length, width 46cm and 2.5cm thick, rubber shoes , caps with nut & bolts. Frame of seat & back shall be made of 2nd class hardwood. Wooden frame sholud be well painted with black paint

Preparation of surfaces (internal, external, shelves, legs etc) of following items and making the surface free from dust rust any foreign material and applying one coat of synthetic enamel paint of 1st quality (Berger/Asian) of approved shade including necessary repairs if any by providing rivets, gas welding denting etc. The paint shall be done by spraying method all as specified and as directed.

Charpoy with hard top (DRG NO-FD/MAP-II/01)

Bed Hard steel plytop (DRG NO-FD/MAP/E6/08(R))

Almirah Large Steel (DRG NO-FD67 M)

Almirah Medium Steel (DRG NO-FD 243 M)

Locker Steel (DRG NO-FD 257 M)

Table Office clerk/typist steel (DRG NO-FD 84 M)

Table office Officer Steel (DRG NO-FD 84 M)

Book shelf open large steel (DRG NO-FD 69 M)

Rack adjustable steel 6 tier (DRG NO-FD 106 M)

Chair CB steel with arms (DRG NO-FD 75 M)

Chair CB steel without arm (DRG NO-FD 75 M)

Steel frame of table dining ORs aluminum. (DRG NO- FD 165 M)

KAILASH KUMAR LADHA (BID ID -3118294)