REPAIR TO BOUNDARY WALL, DRAIN, GARBAGE BIN, FENCING AND GATE ETC UNDER AGE B/R -II OF GE (W) AGRA

Amount

Dismantling posts or struts(wood, steel or R.C.C.) anysection, including taking out embedded portion and making good disturbed\ ground complete all as specified and directed.

Excavation of post holes each not exc 0.50 cum and getting out in soft and loose soils, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm , watering and removing surplus soils to a distance not exc 50 m and making good surfaces.

M&L for cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

S & F angle iron as in post and struts in fencing including embedding in concrete, cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., simillar work confirming to Fe-290 Gde E-165 complete all as specified.

Supply only GI chain link fencing (not less then 2.4kg/sqm)including line wires to any type of standards, rails, straining bolts, etc. complete all as specified and directed. Note :- Line wire and flat iron will be measured and paid separately

Fixing only GI chain link fencing including line wires to any type of standards, rails, straining bolts, etc. including provission of flat iron for securing with post and taking down existing chain link fencing complete all as specified and directed. Note :- Line wire and flat iron will be measured and paid separately

S&FMild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fittedwith washers and one hexagonal or square nut, exc 5cm but n exc 10cm long and 16 to 20 mm diameter of neck complete all as specified and directed.

S&F MS deformed bars 10 mm dia and above cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F in repair galvanised ,2 srand steel barbed wire 2.24mm dia barbed with 2mm dia barsbs at 75mm spacibg and staining rail staining bolts incl, securing or tying at crossing with and provision of galvanised mild steeled wire staples or steel pins etc as directed (each line wire to be measured) complete all as specified and directed.

M&L for demolition of reinforced cement concrete of any description and in any position complete all as specified and directed by Engineer in Charge

M&L RCC M-25 (20 mm graded stone aggregate) as in foundation , raft, footing, plinth beam, base for column etc all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed.

M&L RCC M-25 (20 mm graded stone aggregate) as in column all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Ditto, but 6mm to 8 mm dia all as specified and directed.

M&L for two coat of sythetic enamel paint over one coat of red oxide primer on new steel surfaces of any description ,over 10cm in width or girth not otherwise described including preperation of surface all as specified and

M&L for one coat of sythetic enamel paint on previously treated/ un treated old steel surfaces of any description ,over 10cm in width or girth not otherwise described including preperation of surface all as specified and directed.

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc.

M&L for brick work with subclass B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for 10 to 12 mm thick smart care ready mix repair plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacturer instructions) over interior surface of wall complete all as specified and directed

M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying three coats of white wash paint complete all as specified and directed.

M&L for preparing old plastered surfaces of wall and applying two coats of white wash including binder complete all as specified and directed.

M&L for preparing old plastered surfaces of wall and applying one coat of white wash paint including binder complete all as specified and directed.

M&L for preparing old plastered surfaces of wall and applying one coats of cement base paint complete all as specified and directed.

M & L for applying one coats of Acrylic weather proof Exterior paint (Apex paint) on old plastered or unplastered surfaces of walls or concrete including preparation of surfaces at any height (not.exc8 mtr) complete all as specified and directed.

Providing cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

Demolition of cement concrete in ground floor and paving n exc 15cm thickness (below or above the ground level) built in cement mortar.

M&L for PCC 1:2:4 type B2 (20mm graded Agg) 40mm thick as in surface channel and drains manhole etc all as specified and directed

M&L for 75 mm thick Cement concrete type D-2 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing finishing surface even and rough using broomfinish complete all as specified and directed.

M&L for Chequered cementconcrete tiles 30cm x30cm x 25mm thick,set, jointed and pointed in neat cementslurry in floors over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors / dados, etc laid bedded and pointed in any mortar complete all as specified and directed by the Engineer-in-charge

M&L for coloured glazed ceramic tiles in vertical surface 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed .

Material & labour Non skid coloured Joint free tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm ,in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.

M&L Granite 16-18 mm thick in steps, pillars, window cills, pillars, window cills, cooking platforms and like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rounding edges of stone slab one edge and including 15mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and as directed.

Dismantling of wrought iron of mild steel work of any description not otherwise poivided

S&F Framed work such as grills, gratings,ms mesh etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. conforming to Fe.290.Gde-E-165 for ornamental and intricate design complete all as specified and directed

Attar Singh and Sons (BID ID -3391080)

SahaDevSingh Constructions (BID ID -3388799)

M/S MRITUNJAI SHARMA (BID ID -3387355)

M/S OM Enterprises (BID ID -3391546)

M/S KAMAKHYA CONTRACTORS (BID ID -3390314)

saroj constructions (BID ID -3389849)

M/s S. K. Construction Co. (BID ID -3390654)

M/S APOORVA CONSTRUCTION (BID ID -3388905)