CERTAIN REPAIR TO FLOORING, ROOFING, PLUMBING, SANITARY FITTINGS, SEEPAGE ADDRESSAL AND OTHER MISC WORK AT ZONE-I (A) AREA UNDER GE(S) JAIPUR AT MIL STN JAIPUR

Amount

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges including necessary form work complete all as specified and directed.

M&L for Precast Reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar work including necessary form work and set in CM 1:4 complete all as specified and directed.

M&L for applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete on damaged surfaces after applying anticorrosive paint over cleaned rusted steel surface including demolition old RCC surfaces (chajjas, fins, beams , borders etc and applying 30mm thick polymer modified mortar in CM 1:3 including mixing of polymer latex additives for repair of Chajjas fins, border etc complete all as specified and directed. Note :- (i) Cleaning of rusted part of steel and applying anticorrosive paint over it. (ii) Qty of ploymer to be used 15% by weight of the cement or as per manufacturer instruction. (iii) Use of electrical mixer to get the homogeneous dough on bond coat surfaces. (iv) To achieve required thickness repeat this step after 24 hrs as required. (v) Keep the surfaces moist using water fog for 5 to 7 days etc complete all as specified and as directed. (vi) Rate shall be inclusive of all necessary scaffolding for building of height upto two storey. Make :- (i) The epoxy bonding agent shall be Krishna / Dr Fixit / MC Bauchemie / M/s Cemistik / Sika or equivalent as approved by GE. (ii) Polymer latex addictive shall be of Sika / Fosroc / Dr Fixit or equivalent as approved by GE.

M&L brick work using old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good in Brick walls/RCC cutting not exc 10 cm girth complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed.

M&L for Neoprene / EPDM (Ethylene Propylene Diene Monomer) rubber gasket complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm but not exc 2.00 Sqm each and refixing in the same opening after repair such as easing and adjusting complete all as specified and directed.

S&F in repair handles, stainless steel of 125 mm size, oval shape, fancy type complete all as specified and directed.

S&F 18 mm thick (one side decorative lamination and other side balancing lamination ) solid PVC board with cement solvent adhesive for shutters, kitchen cabinet/ cup board /partition wall/ wall cabinet incuding lipping to exposed surfaces with PVC strip as provide by manufacturer complete all as specified and directed.

M&L in repair for auto close hinges, stainless steel, bright finish or electrogalvanised fixed complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

M&L for mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F rolled mild steel section in roof trusses (framed), trussed, purlins, crane gantries,rail and fastenings and heavy bracket framing (beam, tee, angle,channel or flat sections) including distance pieces, cleat etc of grade Fe 410-W (Gde E-250) quality B complete all as specified and directed.

Taking down existing aluminium window single leaf of area n.exc 1.5 sqm including taking down all members, sheet glass of any thickness, cleat, neoprene rubber beading and resecuring / refixing all section & tightening all joints including fixing new small cleats of suitable size, fixing L-type cleats of stainless steel to secure joints of stiles and rails wherever necessary and refixing all members, sheet glass, aluminium cleat but new neoprene rubber beading (paid under separate item) and making the door shutter serviceable, including fixing the shutter on hinges complete all as specified and directed.

Taking down existing aluminium door single leaf of area exc 1.5 sqm but n.exc 4.0 sqm including taking down all members, sheet glass of any thickness, cleat, neoprene rubber beading and resecuring / refixing all section & tightening all joints including fixing new small cleats of suitable size, fixing L-type cleats of stainless steel to secure joints of stiles and rails wherever necessary and refixing all members, sheet glass, aluminium cleat but new neoprene rubber beading (paid under separate item) and making the door shutter serviceable, including fixing the shutter on hinges complete all as specified and directed.

M&L for applying fibre reinforced, single component, elastomeric liquid applied water proofing coating in white colour, anti-fungal, anti-algae, resistance to water and ageing, excellent UV resistant having Solar Reflective Index more than 105, with PU hybrid polymers and reinforcing acrylic fibers, elongation greater than 300% and applied in three layer complete all as follow :- (a) Preparation of surface by cleaning and removing loose particles then apply first coat of liquid water proofing after diluting as per manufacture instruction as a primer and allow the surface to dry for minimum 10 to12 hours complete all as specified and directed. (b) Apply second coat of liquid water proofing without dilution on the primed surface and allow time to dry the surface for minimum 10 to12 hours complete all as specified and directed. (c) Apply third coatof liquid water proofing without dilution over the second coat and allow minimum 48 hour complete all as specified and directed. Note : (i) Work shall be carried out by authorised applicator of manufacturer only and contractor will submit MoU with authorised applicator of manufacturer before execution of work. (ii) Material incorported in the work shall be calculated as per site requirement and full quantity of material shall be brought at site before execution of work. (iii) Necessary gurantee for 05 years shall be submitted by the contractor. Make :- Berger-HS Roof Kool & Seal, STP-Shali Urethane (R) BTD Plus, Asian - Smart care Damp Proof Ultra or equivalent make as approved by GE.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for machine cut kota stone slab flooring mirror finished 40-50 mm thick (each slab not less than 0.25 sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for 75 mm thick Cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate, 75 mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. The cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and smooth with using extra cement complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm / 450X 350X 7 mm / 300x 600x7 mm / 450x 300x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in CM 1:4 complete all as specified and directed.

M&L for joint free non skid coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for full body vitrified Ceramic tiles light shade cut out of 10mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in vertical surface such as dado / skirting / risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for full body vitrified Ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed or bedding layer 15 mm thick in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15 mm thick in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15 mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:3 as in ceiling surface and finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceilings and apply two coat of white wash complete all as specified and directed.

M&L for preparation of new surface of wall of any description and applying two coats of oil bound distemper (OBD) over and including 2mm thick wall putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two cement based paint complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F 12 mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone,concrete or brick surrounds, glazed with putty of fixed with beads complete all as specified and directed.

S&F in repair for 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S&F in repair PVC 10 litres capacity valveless ,syphonic action type low level flushing cistern ,white including flush pipe, inlet, ball valve, float, handle, fasterner for fixing, 450mm long PVC connection etc complete all as specified and directed.

S&F in repair for Water closet vitreous china anglo indian universal pattern of size 575 x 465 x 395 mm including seat cover but excluding fixing bolts, flusing cistern and flush pipe complete all as specified and directed.

S&F GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

S&F 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

S&F 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

Dismantling of AC/PVC water tank and S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position complete all as specified and directed

Dismantling of AC/PVC water tank and S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position complete all as specified and directed.

S&F in repair bib taps cast copper alloy with crutch or butterfly handle, long body, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated of 15 mm bore dia of pipe complete all as specified and directed.

S&F in repair for 15mm bore dia of pipe pillar taps cast copper alloy, with capstan head chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair for 15mm bore dia of pipe brass CP swan neck, wash hand basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. Make : Jaquar CAT Part No OPP-CHR-15011BPM / Kohler CAT Part No 22534IN-4-CP / Grohe CAT Part No 32851000 or equivalent as approved by GE.

S&F in repair for 15mm bore dia of pipe brass CP kitchen mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F stop cock cast copper alloy, screwed down, high pressure with crutch or butterfly handle fancy type chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore dia of pipe complete all as specified and directed.

S&F in repair ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 75 mm bore of pipe etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed.

M&L PVC (SWR) floor trap of diameter of outlet 75 mm, plain with grating including jointing with solvent cement complete all as specified and directed

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460 mm, bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair Water closet vitreous china squatting pan, orissa pattern 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) and including provision of lime concrete bedding ,'P' or 'S' trap 100 mm bore , flushing pipe ,anti-syphonage pipe and connection etc and making good to floor complete all as specified and directed.

S&F in repair plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

M&L in repair for vitreous china wash basin, white,flat back, size 550 x 400 mm with brackets, including PVC connection of 450 mm long, PVC (HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc. complete all as specified and directed.

M&L in repair for vitreous china wash basin, white,flat back, size 550 x 400 mm with pedestal, brackets, including PVC connection of 450 mm long, PVC (HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc. complete all as specified and directed. Make:- Jaquar Cat part No. KUS-WHT-35935 / Grohe Cat Part No. 39231000 / Kohler cat Part No. 25816IN-0 or equivalent make as approved by GE.

S&F chromium plated towel rail 600 mm long complete all as specified and directed. Make-Jaquar or euivalent as approved by GE

S&F chromium plated towel ring round (20cm dia) / square (20cm x20cm) shape (minimum weight 300gm) with round flange complete all as specified and directed. Make:- Jaquar CAT Part No. CPA-CHR-1121RD / Grohe CAT Part No. 40655001 / Kohler CAT Part No. K-5631IN-CP or equivalent as approved by GE.

S&F float corner glass shelve 8 mm thick 300 mm radius complete all as specified and directed. Make:- Jaquar CAT Part No. ACN-CHR-1173 or equivalent make of Grohe / Kohler / Roca as approved by GE.

S&F in repair for single piece WC With UF Soft Close Slim Seat Cover, Hinges, Flush Cistern Fitting, fixing accessories S / P Trap as per manufacturer instructions complete all as specified and as directed. Make : Jaquar CAT Part No LYS-WHT-38851S300UFSMN / Hindware Cat Part No. 92565 (S-22) / Cera Cat Part No. S1013123 or equivalent as approved by GE.

M&L for table top wash basins, of size 530 x 420 x 140 mm Vitreous China, white, flat back, excluding taps, waste, chain and plug and porcelain stopper but including PVC waste pipe minimum 600 mm long suitable for 32 / 40 mm dia of outlet complete all as specified and directed. Make: Jaquar Cat part No. - JDS-WHT-25907N / Kohler Cat part No - K-5373IN-0 / Roca Cat part No - RS3270Y2000 or equivalent make as approved by GE.

S&F in repair chromium plated soap dish holder complete all as specified and directed. Make:- Jaquar CAT Part No. ACN-CHR-1131N / Grohe CAT Part No. 1024612430 / Kohler CAT Part No. K-5634IN-CP / Roca CAT Part No. RF9060A1 or equivalent as approved by GE.

S&F Stainless Steel Towel Rack 600mm Long complete all as specified and directed. Make:- Jaquar CAT Part No. ACN-CHR-1181S / Grohe CAT part No. 40512001 / Kohler CAT Part No. K-17529T-CP or equivalent as approved by GE.

S&F in repair for 15mm bore, 3-in-1 wall mixer, brass CP, fancy type, for mix ing hot & cold water, having connection for overhead and hand shower and including screwed down for iron pipe or for union along with spout complete all as specified and directed. Make:- Jaquar Cat part No. FUS-CHR-29281 / Grohe Cat Part No. 23198000 / Kohler cat Part No. 99460IN-4-CP or equivalent as approved by GE.

S&F in repair brass chromium plated overhead shower rose of 120 X 120 mm / 150 x 150 mm size with or without swivel joint complete all as specified and directed. Make : Jaquar CAT Part No OHS-CHR-1667 / Grohe Cat Part No. 26565000 / Kohler cat Part No. 22645IN-CP or equivalent as approved by GE.

S&F in repair kitchen plain basket of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed. Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE.

S&F in repair kitchen perforated cutlery basket of stainless steel size 17" x 20" x 4" of grade SS-304 complete all as specified and directed. Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE.

S&F in repair kitchen cup & saucer basket of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed. Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE.

S&F in repair kitchen plate / thali basket of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed. Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE.

S&F in repair baskets guide channel of stainless steel suitable for running basket of grade SS-304, 50cm long and 30 to 40mm width including drilling over stone complete all as specified and directed.

S&F in repair health faucet (hand shower) chromium plated suitable for 15 mm dia pipe with 1.2 metre long flexible tube with non return valve and wall hook including making connections and fixed in position complete all as specified and directed. Make : Jaquar CAT Part No ALD-CHR-577 / Kholer CAT Part No K-12927IN-CP / Roca CAT Part No RF9060A1 or equivalent make as approved by GE.

S&F in repair kitchen plate rack of size 900 mm x 900 mm x 250 mm made out of 1 mm thick stainless steel sheet with shelf and dividing steel bars shelf fixed on wall with rawl plug and screws etc complete all as sapecified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of stone slabs of any description or thickness, laid dry or laid dry and pointed in floor, apron etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

Demolition of reinforced cement concrete (RCC) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removal of rubbish from site complete all as specified and directed.

Demolition of cement concrete un-reinforced in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling of AC corrugated / semi corrugated or translucent sheet as in roof coverings complete all as specified and directed.

M/s KAKSI ENTERPRISES (BID ID -3459003)

ANKIT BUILDERS (BID ID -3453336)