REPAIR TO FOOTPATH PLINTH PROTECTION DRAIN COVER SLABS ETC IN OTM ACCN IN ZONE A AREA INCLUDING REPAIR MAINT OF DOMESTIC COOLING APPLIANCES TOWER AC AND ALLIED WORKS AT GMS UNDER GE I GOS

Amount

Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for complete all as specified & directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as sub base of floor complete all as specified and directed.

M&L for hard core of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface omplete all as specified & directed.

M&L for cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in path/ hard standing surface finished even and fair complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in sub base,floor , plinth protection etc and finishing cement concrete even and fair omplete all as specified & directed.

M&L Excavating over areas, n exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed.

M&L for providing Glass strip of 6 mm thick and 40 mm deep in hardstanding for making panels complete all as specified and directed.

M&L for 10 mm thick heavy duty exterior designer tiles of size 300 mm x 300 mm as in floor set, jointed in neat cement slurry and pointed with grey cement and pigment complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for Fe 410-W (Gde E-250 quality A) Framed work as in doors or gates of angle or other section with gusset plates,rails,braces etc complete,drilled for fixing of steel sheeting or other covering. Doors,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening anf fixing complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.

M&L for two coats synthetic enamelled paint to new steel surfaces after preparation over a coat of red oxide primer area over exc 10cm in width or girth etc complete all as specified & directed.

M&L preparation of new steel surfaces of any description n exc 10cm in width or girth and priming with red oxide zinc chrome and applying two coat of synthetic enamel paint complete all as specified & directed.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) bends any radius complete all as specified and as directed.

Demolition of RCC of any description and in any position not other wise specially provided for reinforcement cut as required to facilitate demolition complete all as specified and directed.

M&L for pre cast cement concrete 1:1.5:3, type A-1, using 20mm graded stone aggregate as in cover slabs (for manholes etc) and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

M&L for Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for finishing cement concrete even and smooth using extra cement complete all as specified and directed.

M&L for Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth in soft /loose soil etc complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on brick or concrete surface, finishing even and smooth without using extra cement complete all as specified and directed.

M&L for Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil etc complete all as specified and directed

M&L for Removing excavated material (Soil) exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm high etc complete all as specified & directed. (Note : Rates to be deemed fit for all security measures while working in heights more than 6m from GL).

S&F in replacement starting relay assembly suitable for refrigerator 165 to 310 ltrs capacity complete all as specified and directed.

S&F in replacement starting relay assembly suitable for Deep freezer 200/300/400 ltrs capacity complete all as specified and directed.

S&F in replacement thermostat switch for refrigerator 165 to 310 ltrs capacity complete all as specified and directed.

S&F in replacement thermostat switch for DEEPFREZEER 200/300/400 ltrs capacity complete all as specified and directed.

S&F in replacement cabin bulb 15 watt 230 Volts screw / pin type for refrigerators/Deep freezers complete all as specified and directed.

S&F in replacement freezer door chest with spring hinges / screw, washers, nuts etc., for refrigerator 165/200/300/400 ltrs capacity as per existing complete all as specified and directed.

S&F in replacement door gasket magnetic type suitable for refrigerator 165/200/300/400 ltrs capacity complete all as specified and directed.

S&F in replacement condenser suitable for refrigerator 165 to 310 ltrs capacity complete all as specified and directed.

Dismantling of UNSV compressor for 165 to 310 Ltr. capacity refrigerator including disconnecting suction/ discharge copper tubing (replacement basis excluding copper tubing ), replacing by S&F new compressor and fixing on position with nuts, bolts, rubber gromote and washers, connecting copper tubing by welding / flare nuts, complete all as specified and directed.

Carrying out pressure leak test for detecting leak in condensing unit refrigerant pipe and repairing the leak by welding or brazing of condensing unit and refrigerant pipe, putting under pressure for leak checking after repairs of leak pipe including transporting & carrying out T&P required at site all as directed for refrigerators / deep freezer of capacity 165/ 200/300/400 Ltrs complete all as specified and directed.

Supply & charging of refrigerant gas R-134 (a) into the system of refrigerant for refrigerators of any capacity. NOTE:The Cost of Strainer & Cappliary of suitable size is included

S & F in replacement cooling coil for refrigerators 165 to 310 ltrs capacity after disconnecting the cooling coil from refrigerator N-2 pressure testing and flushing out the system and charging with refrigerant gas as per required quantity and testing complete all as specified and directed .

Dismantling of UNSV compressor for 200/300/400 Ltr. capacity Deep freezer , including disconnecting suction / discharge copper tubing (replacement basis excluding copper tubing ), replacing by S&F new compressor and fixing on position with nuts, bolts, rubber gromote and washers, connecting copper tubing by welding / flare nuts, complete all as specified and directed.

Carrying out pressure leak test for detecting leak in condensing unit, refrigerant pipe and repairing, the leak by welding or brazing of condensing unit refrigerant pipe, putting under pressure for leak checking after repairs of leak pipe including transporting & carrying out T&P required at site for work of walking cooler complete all as specified and directed.

Supply & charging of refrigerant gas R-134 (a) into the system of refrigerant for deep frezeer 300/400 Ltrs complete all as specified and directed. NOTE.The Cost of Strainer & Cappliary of suitable size is included

Dismantling of UNSV legs of Deep freezer and S&F new legs of water cooler made out of 50x50x6mm angle iron including welding / riveting and reinstalling the same after repairs / replacement complete all as specified and directed.

S&F in replacement butt hinges made out of aluminium alloy with galvanised mild steel hinge pin, anodized with necessary screws, washers as required as in Deep freezer omplete all as specified and directed.

Removing defective condensing fan motor of Deep freezer single phase 230 V 50 HZ and opening of blower motor and supply and fixing new motor of existing capacity and size including testing and commissioning complete all as specified and directed.

Repair/maint of refrigerator bymetallic timer for defrost system as existing with S&F bymetallic timer complete all as specified and directed.

Taking down from existing location and refixng after maintenance and servicing of window type / split type AC of capacity 1.5/2 TR by cleaning condensing coil, cooling unit, blower motor, oiling & greasing of moving parts and testing by soap solution, brush and air blower, tightening nuts, bolts screws and general check-up (Electrical system) of complete unit complete all as specified and directed.

Dismantling the UNSV compressor from 1.5 ton capacity window/ split AC, excluding copper tubing (replacement basis), replace by S&F of same capacity new compressor and fixing on position with nuts, bolts, rubber grommet and washers, connecting copper tubing by welding/ flare nuts complete all as specified and directed.

Dismantling the UNSV compressor (sealed unit) from 2 ton capacity split AC, excluding copper tubing (replacement basis), replace by S&F of same capacity new compressor and fixing on position with nuts, bolts, rubber grommet and washers, connecting copper tubing by welding/ flare nuts complete all as specified and directed

Taking down existing perished plywood and S&F plywood frame/ cover and packing with 6mm thick of plywood in window suitable for fixing of window type AC including two coat synthetic white paint over one coat of primer complete all as specified and directed.

Taking down exisiting unserviceable point wiring and M&L for point wiring with 6 sqmm single core (multi stranded) copper conductor -02 Nos unsheathed flexible (FRLS) cables in point wiring and PVC insulated (multi stranded) copper conductor single core of size 4 sqmm as continuous earth wire drawn into and including PVC casing-caping/ conduit heavy duty having wall thickness 1.5 mm for one AC point complete all as specified and directed.

S&F in repair single pole and neutral enclosure with a two pin and earth plug socket 240 V with one MCB SP ‘C’ series rating 20 Amp complete all as specified and directed.

S&F in replacement running capacitor 36 MFD suitable for 1.5 ton window /Split type air conditioner complete all as specified and directed.

All as per item No. 58 above but 45 MFD for 2.0 ton AC

S&F in replacement starting capacitor 80-100 MFD suitable for 1.5/2.0 ton air conditioner complete all as specified and directed.

S&F in replacement starting relay assembly including coat & cover and clips suitable for AC 1.5/2.0 ton window/ spilt type air conditioner complete all as specified and directed

M&L for rewiring to AC window type 1.5 ton capacity with copper wire of single core of suitable capacity with and including S&F of 3 core copper flexible round cable of size 2.5 Sqmm multi stranded in length not less than 3 mtr complete all as specified and directed.

S&F in replacement blower motor suitable for 1.5 ton window type AC, single phase 230 Volts with replacement of bushes including testing and commissioning complete all as specified and directed.

S&F in replacement air filter pad suitable for any type AC 1.5/2.0 ton capacity complete all as specified and directed.

Carrying out pressure leak test for detecting leak in condensing unit, refrigerant pipe and repairing the leak by welding or brazing of condensing unit and refrigerant pipe, putting under pressure for leak checking after repairs for 72 hours of leak pipe including transporting & carrying out T&P required at site for work of 1.5/2.0 ton capacity any type of AC complete all as specified and directed.

Flushing out by N-2 and CTC, vaccination and supply & charging of refrigerant gas as per existing into the system for 1.5 / 2.0 ton capacity any type AC complete all as specified and directed. NOTE: Cost of Strainer & 0.60 size cappliary incuded in the rate

Dismantling of defective worn out wiring of indoor unit of split AC of capacity 1.5/2 TR with sensor including UNSV corded electronic remote control, supply and fixing new cordless remote control unit with hand set and sensor device to suit/ match as per the existing system complete all as specified and directed.

Dismantling of defective worn out wiring of indoor unit of split AC of capacity 1.5/2 TR including UNSV corded electronic remote control, repairing the PCB of the cordless remote control unit with hand set and sensor device to suit/ match as per the existing system complete all as specified and directed.

Dismantling of defective cooling indoor unit of 1.5/2 TR capacity split AC complete with connected piping and corded remote control etc & re-fixing on wall/floor after carrying out repairs and servicing and making good the disturbed surfaces as per the existing complete all as specified and directed.

Dismantling of defective condensing unit of 1.5/2 TR capacity split AC complete with connected lead and iron stand etc and re-fixing on roof/floor after necessary repairs and servicing complete all as specified and directed.

S&F in replacement blower fan motor assembly suitable for 1.5/2.0 Ton capacity split AC complete all as specified and directed.

S&F in replacement fan motor capacitor 4/ 6 MFD for AC complete all as specified and directed

S&F in replacement suction copper pipe line heavy ½” dia with foam insulation and flair nuts from indoor to out door unit of split type AC 2.0 TR capacity complete all as specified and directed.

All as per item No. 73 above but discharge copper pipe line heavy duty 3/8” dia complete all as specified and directed.

All as per item No. 73 above but discharge copper pipe line heavy duty 3/4” dia complete all as specified and directed.

Disconnecting the electrical connections and overhauling / Servicing of FFB 600 compact descant dehumidifier with replacement timer and contactor 25 Amper as existing make complete all as specified and directed.

M&L for disconnecting the electrical connections of the 3 phase 15 KVA SERVO controlled voltage stabilizer and repairing variac plate, electric circuit and motor and fix on load with testing and commissioning complete all as specified and directed.

Dismantling the UNSV defective indoor unit of 1.5 TR capacity split type AC, S&F indoor unit of same capacity of any make with blower motor, front grill and connecting the copper tubing by brazing detecting leak and rectifying the same and installing the same complete all as specified and directed.

Dismantling the UNSV outdoor unit of 1.5 TR capacity split type AC, S&F outdoor unit of same capacity of any make fitted with condensing unit and motor but without compressor and install the same by charging refrigerant gas complete all as specified and directed.

S&F in replacement of front PVC grill suitable for 1.5 Ton window type AC complete all as specified and directed

S&F in replacement AC stand suitable for Split AC 1.5/2.0 Ton capcity complete all as specified and directed

Dismantling of water cooler of 120-150 ltrs storage capacity from its position, taking out water from its water tank cleaning of water tank by washing powder and with fresh water externally and internally and storage tank without disturbing the existing position and connecting the water line including GI fitting when required and PVC pipe connection complete all as specified and directed.

Taking out defective gasket of storage water cooler of top cover and S&F new rubber gasket of existing size complete all as specified and directed.

S&F in replacement condensing coil suitable for 120 to 150 ltrs capacity water cooler of existing make complete all as specified and directed.

S&F in replacement condensing motor with blades, AC, 240 Volts 50 Cycle per second, single pole complete all as specified and directed.

S&F in replacement starting relay assembly including cover and clips suitable for water cooler of any capacity complete all as specified and directed.

Dismantling of defective starting capacitor S&F new capacitor 60 - 80 Mfd complete all as specified and directed.

All as per item No 87 above but 40/60 MFD

All as per item No.87 above but running capacitor 36 MFD.

All as per item No 87 above but 15 MFD.

S&F in replacement capacitor 4 Mfd suitable for blower motor of water cooler complete all as specified and directed.

S&F in replacement thermostat suitable for water cooler any capacity complete all as specified and directed.

S&F in replacement push/lift type self closing taps PVC suitable for water cooler complete all as specified and directed.

S&F in replacement PVC float valve assembly with ball suitable for 15 mm bore pipe of water cooler complete all as specified and directed.

Dismantling of UNSV compressor for 120/150 Ltr. capacity water coolers, including disconnecting suction / discharge copper tubing (replacement basis excluding copper tubing ), replacing by S&F new compressor and fixing on position with nuts, bolts, rubber gromote and washers, connecting copper tubing by welding / flare nuts, complete all as specified and directed.

Dismantling of UNSV old defective & burnt compressor for 40/80 ltrs capacity of water cooler including disconnecting suction / discharge copper tubing replacing by S&F new compressor and fixing on position with nuts, bolts, rubber gromote and washers, connecting copper tubing by welding / flame nuts, detecting leak and repairs if any, complete all as specified and directed.

Carrying out pressure leak test for detecting leak in condensing unit, refrigerant pipe and repairing, the leak by welding or brazing of condensing unit refrigerant pipe, putting under pressure for leak checking after repairs of leak pipe including transporting & carrying out T&P required at site for work of water cooler complete all as specified and directed.

Supply & charging of refrigerant gas into the system of water coolers complete all as specified and directed. NOTE: The Cost of Strainer & Cappliary of suitable size is included

Dismantling of UNSV legs of water cooler and S&F new legs of water cooler made out of 50x50x6mm angle iron including welding / riveting and reinstalling the same after repairs / replacement complete all as specified and directed.

S&F in replacement butt hinges made out of aluminium alloy with galvanised mild steel hinge pin, anodized with necessary screws, washers as required as in water cooler complete all as specified and directed.

Removing defective condensing fan motor of water cooler single phase 230 V 50 HZ and opening of blower motor and cutting out the burnt wiring and cleaning the slots of rotor and rewinding of the same with the existing size of super enamelled copper winding wire including insulation, varnishing, greasing, replacement of bushes, reassembling including testing and commissioning complete all as specified and directed.

Cutting & removing of worn-out body of the deteriorated water coolers from the body and supply and fixing new MS sheet of 16 gauge by welding, rebating and matching the existing surface including applying iron putty and two coats of synthetic enamel paint of approved shade over a coat of red oxide primer complete all as specified and directed.

S&F in replacement waste water tray of water cooler made out of stainless steel as per required size complete with drain system complete all as specified and directed.

Preparation of old painted surfaces and applying two coat of synthetic enamelled paint over a coat of red oxide primer of approved colour outside and two coats of black bituminous paint inside of water cooler including writing of MES NO/ SM No. complete all as specified and directed.

Removing the UNSV water purifier from its position and opening the purifier, cleaning the same and replacement of the damage parts like new candle, 3 in 1 cartridge set and assembling the same after testing and fitting complete all as specified and directed.

Dismantling of main transformer winding of voltage stabilizer and stamping and material and labour for re-assembling the stamping, rewinding of main transformer, single phase, 50 Hz,2 KVA capacity with supper enamelled copper winding wire of existing gauge/ weight/ turns/ taping and varnishing after repairs complete all as specified and directed.

Dismantling of main transformer winding of voltage stabilizer and stamping and material and labour for re-assembling the stamping, rewinding of main transformer, single phase, 50 Hz, 1 KVA capacity with supper enamelled copper winding wire of existing gauge/ weight/ turns/ taping and varnishing after repairs complete all as specified and directed.

Dismantling of main transformer winding of voltage stabilizer and stamping and material and labour for re-assembling the stamping, rewinding of main transformer, single phase, 50 Hz,0.5 KVA capacity with supper enamelled copper winding wire of existing gauge/ weight/ turns/ taping and varnishing incl electronic spares replace after repairs complete all as specified and directed.

Dismantling of main transformer winding of voltage stabilizer and stamping and material and labour for re-assembling the stamping, rewinding of main transformer, single phase, 50 Hz,3,0 KVA capacity with supper enamelled copper winding wire of existing gauge/ weight/ turns/ taping and varnishing incl electronic spares replace after repairs complete all as specified and directed.

Dismantling of main transformer winding of voltage stabilizer and stamping and material and labour for re-assembling the stamping, rewinding of main transformer, single phase, 50 Hz,4.0 KVA capacity with supper enamelled copper winding wire of existing gauge/ weight/ turns/ taping and varnishing incl electronic spares replace after repairs complete all as specified and directed.

Dismantling of main transformer winding of voltage stabilizer and stamping and material and labour for re-assembling the stamping, rewinding of main transformer, single phase, 50 Hz, 5 KVA capacity with supper enamelled copper winding wire of existing gauge/ weight/ turns/ taping and varnishing after repairs complete all as specified and directed.

Dismantling unserviceable CGI/Fiber sheet from top cover of water cooler , S & F Galvanised corrugated mild steel sheeting with two corrugation side lap fixes with coach screws and washers in roofs 0.63mm size , walls etc with grade of zink coating 275. complete all as specified and directed.

S&F in replacement of PVC waste water pipe suitable for water coolers complete all as specified and directed.

S&F in replacement of contactor 16 Amps capacity for Split type AC remote complete all as specified and directed.

Dismantling split AC 1.5 TR and S&F in replacement of condensing coil existing make and capacity for Split type AC complete all as specified and directed.

Dismantling split AC 2.0 TR and S&F in replacement of condensing coil existing make and capacity for Split type AC complete all as specified and directed.

Dismantling split AC 1.5 TR and S&F in replacement of cooling coil existing make and capacity for Split type AC complete all as specified and directed.

Dismantling split AC 2.0 TR and S&F in replacement of cooling coil existing make and capacity for Split type AC complete all as specified and directed.

Carrying out pressure leak test for detecting leak in condensing unit, refrigerant pipe and repairing the leak by welding or brazing of condensing unit and refrigerant pipe, putting under pressure for leak checking after repairs for 72 hours of leak pipe including transporting & carrying out T&P required at site for work of 3.5/4.5 ton capacity any type of AC complete all as specified and directed.

Flushing out by N-2 and CTC, vaccination and supply & charging of refrigerant gas into the system for 3.5/4.5 ton capacity any type AC complete all as specified and directed. NOTE : Cost of Strainer & 0.60 size cappliary incuded in the rate

Dismantling of defective cooling indoor unit of 3.5/4.5 TR capacity Tower type AC complete with connected piping and corded remote control etc inc transportation & re-fixing on floor after carrying out repairs and servicing and making good the disturbed surfaces as per the existing complete all as specified and directed.

Taking down from existing location and refixng after maintenance and servicing of tower type AC of capacity 3.5/4.5 TR by cleaning condensing coil, cooling unit, blower motor, oiling & greasing of moving parts and testing by soap solution, brush and air blower, tightening nuts, bolts screws and general check-up (Electrical system) of complete unit complete all as specified and directed.

Dismantling of defective worn out wiring of indoor unit of tower type AC of capacity 3.5/4.5 TR including UNSV corded electronic remote control, repairing the PCB of the cordless remote control unit with hand set and sensor device to suit/ match as per the existing system complete all as specified and directed.

Check U/S AC cordless remote controlled hand set and supply and replace new hand set as existing make complete all as specified and directed

Repair/maint of AC 1.5/2TR U/S inlet/out let valve as existing with S&F complete all as specified and directed.

Dismantling U/S waste water tray of water cooler and S&F new stainless steel tray any capacity and make complete all as specified and directed.

S&F automatic Voltage stabiliser single phase,50cycle HZ ,230 volts +/- 5% ,110 to 250 rating 2KVA complete all as specified and directed.

S&F automatic Voltage stabiliser single phase,50 HZ ,230 volts +/- 5% ,110 to 250 rating 3KVA complete for water cooler all as specified and directed.

S&F automatic Voltage stabiliser single phase,50 HZ ,230 volts +/- 5% ,110 to 250 rating 4KVA complete for 1.5TR AC all as specified and directed.

S&F automatic Voltage stabiliser single phase,50 HZ ,230 volts +/- 5% ,110 to 250 rating 5KVA complete for 2TR AC all as specified and directed.

Taking out old U/S refrigerator vegitable tray and supply and fixing new tray as per existing complete all as specified and directed.

Dismantling the UNSV catrige filter membranes for replacement of new catrige filters complete all as specified and directed.

S&F in replacement of RO membrane of model BW 40-40 as per existing 40E100 seawater of max operating presure 1000 PSI (68 bar) or equivalent complete all as specified and directed.

S&F in replacement 'U' PVC pipes of size 15 mm to 50 mm dia with fittings to arrest the leakage complete all as specified and directed.

M&L for overhauling/backwash and cleaning of the desalination plant at GMS with citric acid 10 Kgs and 5 Micron catrige filter-02 Nos including complete all as specified and directed.

S&F multiport valve 65 NB with SM filter union.

S&F coupling victaulic coupling of size 25 mm

Testing the TDS of the product water complete all as specified and directed.

S&F in replacement chemical dosing pump 15 ltr/hour/10 Kgs presure, HP-0.5, volts 240v/440v, RPM-1400 with all connections incl suction and delivery complete all as specified and directed.

M&L for painting of complete installation including pumps, filter, pipe line, valves complete all as specified and directed.

M/s Bapujee Builders and Traders

M/s M M Engineering Systems

M/s Ats Electricals

M/s MAA BHAIRABI ENTERPRISES