Provn of security wall, septic tank, soakage well, false ceiling, shed and other certain minor and revenue work under AGE BR-I at Nagrota under GE Nagrota.

Amount

Schedule 'A' Part-I (B&R and Misc Work)

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft soil, complete all as specified and directed.

M & L for Cement concrete 1:5:10 Type E-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed.

S & F rolled mild steel work in tubular trusses including special washer etc, using ERW or induction butt welded tubes confirming to IS 1161-1979 grade ST-240, complete all as specified and directed.

S & F 2 mm thick fibre glass reinforced transulant corrugated sheets with two corrugation side lap in roof, walls, etc. fixed with 'L' type or 'J' type hooks or cranked hook bolts, complete all as specified and directed.

Construction of Soakage well of size 2.4 mtr. dia and 4.5 mtr depth in excavation in any type of soil foundation in PCC 1:3:6 , walls of honey combed and solid brick work in CM 1:4, RCC M-25 cover slab filling with bats as shown in drg No TD CE/TD-1202/2003 sheet No 1/2 and 2/2 dt 09.10.2003, complete all as specified in drg, complete all as specified and directed. Note : Rate quoted shall deemed inclusive of dwatering during construction if met with.

Soakage well exc, in any type of soil, foundation in PCC 1:3:6, wells of honey combed and solid in M-25 concrete, including interceping chamber, screen chamber brick work in CM, RCC cover slab in M-25/RR masonry/filling with brick bats, complete of size 1.2 M dia x 1.5 m deep, complete all as specified and directed and as shown in Drg No CE/TD/1202/2003 sheet No 1/2 & 2/2.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in landing cover slabs for manholes, complete all as specified and directed.

M & L for 100 thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floors finishes , complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping, band, bed plates and similar items including weathering slightly rounded or chamferred angles and throughting, complete all as specified and directed.

S&F mild Steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 MM dia or securing with clips quality conforming to Gd I, IS 432(part I) or Fe-410-S or Fe-410-0, complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil, complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base on floors, foundation filling and mass concreate, complete all as specified and directed.

M & L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25cm complete in any type of soil,complete all as specified and directed by Engineer-in-Charge.

Removing surplus spoil to a distance not exceeding 50 m and deposited where directed at a level not exceeding 1.50 m from the starting point, complete all as specified and directed.

Removing surplus spoil to a distance exceeding 250 m but not exceeding 500 m and deposited where directed at a level not exceeding 1.50 m from the starting point, complete all as specified and directed.

M&L for concrete bed to drain pipes of bore 150mm including packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) including necessary shuttering and supports, complete all as specified and directed.

M&L for 150 mm dia salt glazed stone were drain pipes grade ‘A’ ISI marked laid to slope in trenches, jointed in CM (1:1) and tested, complete all as specified and directed.

Mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.

S & F mild steel 300 mm long helical door springs including roller and roller plate complete and necessary welding required, complete all as specified and directed.

Prepration of new steel surfaces any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Surface excavation not exceeding 30 cm and averaging 15cm deep in any type of soil, complete all as specified and directed.

M&L for hard core of broken bricks n exe 63 mm, deposited, spread and levelled in layers n exe 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

Forming contraction (Dummy) joints 65 mm deep x 10 mm wide filled with sealing compound of grade 'A' , complete all as specified and directed.

Add or diduct from item No 1.24 for every 5 mm depth of joints over or under.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground levels), complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work in CM 1:4, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in flooring, finished rough, complete all as specified and directed.

M & L for providing precast cement concret 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) louvres and jallies, 25 mm thick (measured solid), including all mouldings and set in CM 1:4, complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and directed.

M & L for 10 mm thick Vitrified Ceramic tiles, Light shade, (square/rectangle) Polished area of each tile exceeding 0.36 sqm but n exc 0.42 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:4, complete all as specified and directed.

M & L for 10 mm thick Vitrified Ceramic tiles, Light shade, (square/rectangle) Polished area of each tile exceeding 0.36 sqm but n exc 0.42 sqm, in verticle surfaces like skirting, Dado set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 15mm thick bedding layer of mortar for laying floor finishes in CM 1:4, complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutter from the frame) exceeding 1.5 sqm but not exceeding 4 Sqm each and refixing in the same opening, complete all as specified and as directed at site.

M & L for preparation of old decorated surface of wall and applying minimum 2 mm thick wall putty and applying two coats of oil emulsion distemper over one coat of primer, complete all as specified and directed.

M & L for preparation of new/old plastered or unplastered surfaces of ceilings and applying three coats of white wash, complete all as specified and directed.

Dismantling of wall & ceiling boards including cover fillets if any, complete all as specified and directed.

GI T Grid system in 600 x 600 mm module which includes providing and fixing wall angle along the perimeter of the room with nylon sleeves and wooden screws at 300 mm centre to center. Suspendeding the main tee of size from the soffit, soffit cleat, rawl plugs and wire rod & leveling spring clip at 1200mm center to center cross tee, interlockined into the pre-cut slots in the main tees at 600 mm centre to center in direction perpendicular to the main tee to make a grid of 600x 1200mm. Finally 1200 mm cross tees are interlocked in the pre cut slots in the 1200mm tees at 1200 mm center to center in direction parallel to the main tee. Cross Tees having length more than 600 mm are to be supported independently. 6 mm thick aquesostic tile square edge of size 595x595 mm shall be placed into the grid size of 600x600mm. (a) Main T-24x32 thickness 0.3 mm and length 3600. (b) Cross T-24x25 thickness 0.3 mm and length 1200. (c) Cross T-24x25 thickness 0.3 mm and length 1600. (d) Wall angle - 24x24 thickness 0.4 mm and length 3000. Make : Gyproc Saint Gabin Gyproc/Everest.

S & F 125 mm aluminium handles cast type anodized, complete all as specified and directed.

S & F Anodised aluminium window grill 8mm dia ornamental type (design/pattern as approved by Engr-in-Charge), complete all as specified and directed.

S & F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S & F 100 mm aluminium anodised barrel tower bolt of extruded section and fixed,complete all as specified and directed.

S & F 150 mm extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed..

S & F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S & F 75 mm long butt hinges, medium wight cold rolled mild steel, complete all as specified and directed.

S & F 1 mm thick aluminium sheet covering to draining board fixed with aluminium alloy screws, complete all as specified and directed.

M&L for Brick work with subclass 'B' old size bricks/ tiles straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

M&L for Brick work with subclass 'B' old size bricks/ tiles straight or curved on plan to any radius in half brick to radius built in cement mortar 1:4, complete all as specified and directed.

M& L for 10 mm thick cement plastering in cement mortar 1:6 on concrete or wall surface fair finished even and smooth without using extra cement, complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali-primer, complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including 2 to 3mm thick wall putty, complete all as specified and directed.

M & L for Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but n exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or beddding layer of CM 1:6, complete all as specified and directed.

M & L for Glazed ceramic coloured printed tiles (first quality) of size 350 mm x 250 mm x 7 mm/300 mm x 250 mm x 7 mm thick as in vertical surface, dado/skirting, over and including 10 mm thick screed bed in CM 1:4, complete all as specified and directed.

S&F vitrous china wash basin,white, counter type,flat back of size 550 mm x 400 mm with CP pillar tap and waste coupling, angle brackets, PVC connection 15 mm size, PVC waste pipe, complete all as specified and directed..

S & F 15 mm bore Pillar taps , fancy type with capston head chromium plated, screwed down high pressure, with screwed shanks and fly nuts, complete all as specified and directed.

S&F 20 mm bore stop valve/angle fancy type , cromimum plated with long shank(concealed type) cast copper alloy screwed down high pressure a handle screwed both ends for iron pipe or union, complete all as specified and directed.

S & F 15mm bore dia steel water tubing,medium grade, galvanized tube, with all fitting and fixed to wall or ceiling or laid in floor, complete all as specified and directed.

S & F 20mm bore dia steel water tubing,medium grade, galvanized tube, with all fitting and fixed to wall or ceiling or laid in floor, complete all as specified and directed.

S&F stainless steel sink, 1.00 mm thick for kitchen or laboratory with plug, waste pipe, washers including bedding in cement mortar on to dwarf wall or fixing cantilever cast iron brackets connecting union etc., over all size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm with waste coupling, complete all as specified and directed.

S&F PVC grating round 140 mm size of PTMT (minimum weight 50 gms), complete all as specified and directed.

S & F 32 mm PVC waste pipe for wash hand basin, complete all as specified and directed.

S & F 15 mm pillar tap, chromium plated, screwed down high pressure with and without levelled hot or cold with long screwed shanks and fly nuts screwed for pipe and fixed in repairs, complete all as specified and directed.

S & F 15 mm bore CP sink cock screwed down high prressure with crutch or butterfly handle, complete all as specified and directed.

M & L for chequered cement concrete tiles 25 mm thick set, joined and pointed in neat cement slurry in floors with grey cement and no pigment over and including 20 mm thick screed bed or bedding layer in CM 1:4, and 75 mm thick PCC 1:2:4 type B2 (using 40 mm graded crushed stone aggregate), complete all as specified and directed.

M & L for Udaypur green stone 15 to 18 mm thick. (table rubbed and polished) as in cooking plateform of size not less than 2 m in length, incl cutting for sink over and including 20 mm thick screed in CM 1:4 including roughing of existing surface and applying a coat of cement slurry @ 03 Kg/Sqm of surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match, complete all as specified and directed.

S & F 1000 Ltrs capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed.

S & F 35 mm thick second class hard wood, factory made, plain, framed, panelled shutters (two numbers of panels) with lock rail and panel of 9 mm BWP commercials ply or 12 mm veneered particle board on both faces. The size of rails and size as per IS:1003 (Part-I), Kiln seasoned & chemically pressure treated, complete all as specified and directed.

S & F 35 mm thick second class hard wood, factory made, glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamered or rounded, fitted with cut and mitred beads for securing glass, etc. Size of memebers of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) for doors, complete all as specified and directed.

Pressed steel door frame of size 105 mm x 60 mm with one or more rebates using 1.25 mm thick sheet including necessary fixing lugs, lock strike plate including one shop coat of zinc chromate primer, complete all as specified and directed.

Galvanised MS wire cloth 0.456 nominal dia and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staples, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nanital or similar pattern roof coverings, complete all as specified and directed.

M&L for mild steel rolled work as in roof trusses ( framed) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc. , conforming to grade Fe 410-S, complete all as specified and directed.

M & L for 0.50 mm thick trepezoid profile colour powder coated semi corrugated steel sheeting fixed in room with self drilling screw as per manufacturer instruction, complete all as specified and directed.

M & L for 0.50 mm thick trapezoid profile powder coated plain steel sheeting in ridge, hips, valley gutter, drip and stright flashing fixed in roofing as per manufacturer instruction, complete all as specified and directed.

Dismantling of mild steel work in any description, complete all as specified and directed.

Prepration of wood or wooden based new or previously untreated surface of any description, over 10 cm width or gridth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Construction of RCC septic tank designed for 50 users to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 design mix in walls, base slab, baffle walls and roof slab including beam etc, with vent shaft, manhole openings with cover connection etc with effective depth of 1.5 mtr and over all depth of 3 mtr conventional type, complete all as specified and directed and as shown in Drg No CE/TD/1202/2003 sheet No 1/2 & 2/2.

M & L for form work to sides of pillars piers, posts struts and columns etc similar works finished fair finished, complete all as specified and directed.

M & L for Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications, complete all as specified and directed.

M & L for 5 mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification, complete all as specified and directed.

S & F 25 mm thick solid core construction, with block board corer and both faces covered with decorative face veneer with liping frame with 2nd class softwood as in shelves of cupboard & cupboard shutter, complete all as specified and directed.

S & F 100 mm long hasp and staple aluminium anodized with steel hinge pin including bolt to hinge plate, complete all as specified and directed.

S & F 25 mm dia drapery rods plastic coated fixed on wall including funnels and brackets, complete all as specified and directed.

S & F channel fixed in cupboard top and bottom with all assessories, complete all as specified and directed.

Material and labour for rendering 20mm thick in two layers (12mm + 8mm) externally on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surface even & smooth without using extra cement mixed with and including water proofing compound @ 2% on top layer of 8mm thick, complete all as specified and directed.

M&L for 50mm thick plain cement concrete, 1:3:6, type C1 (using 20mm graded crushed stone aggregates) as in plinth protection/paving including finishing surface even and smooth without using extra cement, complete all as specified and directed.

M&L for sand filling under floor or in foundation including watering and consolidation, complete all as specified and directed.

M&L for 20mm thick screed bed or bedding layer in cement mortar 1:6 on floors for laying floor finish, complete all as specified and as directed.

M&L for 10mm thick rendering screed bed or bedding layers in cement mortar 1:3 for laying tiles on vertical surfaces, complete all as specified and directed.

M&L for antiskid scratch resistant paving tiles, coloured, 300mm 300mm x 10mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with approved colour pigment to match colour, complete all as specified and as directed.

Material and labour for 20mm thick granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and directed.

Schedule 'A' Part-II (Internal Electrification)

Taking down carefully aluminium conductor point wiring (light fan, socket and power) complete with fittings such as switches, sockets, lamps holder, utility light fitting, fan regulator etc and making good disturbed surface of walls and floors etc. and keeping in safe custody for taking credit, complete all as specified and directed by Engr-in-Charge.

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sqmm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2 mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5 sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified for the following;-

(a) One light point controlled by one switch 5 Amp.

(b) One ceiling fan/exhaust fan point controlled by one switch 5Amp

(c) One socket out let 5Amp controlled by one switch on same board.

(d) One socket out let 5 Amp controlled by one switch on independent board.

All as per item No 2.02 here in before but point wiring with 2.5 sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5 sqmm cable as earth continuity conductor for one 15 Amp socket out let controlled by one 15 Amp switch on independat board.

S&F switch piano flush type 5 Amps, single pole, one way, complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type, complete all as specified and directed.

S&F switch socket combination 2 in 1, 5 pin 5 /15 Amps flush type, complete all as specified and directed.

S&F of ceiling rose surface type 65mm x 50 mm 2 to 3 terminal complete PVC/ Polycarbonate isolated body complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required, complete all as specified and directed.

S & F white powder coated CRCA housing with LEDs 36 W, 230 V, 50 Hz recess mounting LED 2 feet x 2 feet luminaries, seemless front frame with flat white hight transmission acrylic cover complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No BZRSQL 36 W GZ WH of Bajaj or equivalant in approved make, complete all as specified and directed.

S & F Integrel sleek extruded batten aluminium /CRCA channel fitting with LED 18 watt complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, Cat part No. BLRB DB 118 ( for batten fitting) & Cat part no. BLRB18W CW LED (for LED 18 watt ) of Bajaj or equivalent in approved make, complete all as specified and directed.

S & F wall mounted fan 400 mm sweep single phase AC 230/240 Volts complete, holding down down botls, nuts, washers and provision of flexible copper coductor cable 3 core 23.0/0.0076 size from ceiling rose to wall mounted fan including testing, complete all as specified and directed.

S&F sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete all as specified and directed.

S & F MCB DP 63 Amps 10 KA 230 volts "C" series, complete all as specified and directed.

S & F MCB single pole 6 to 30 Amps, 10KA, 230 volts 'C' series complete all as specified and directed.

S & F sheet metal plug and socket with MCB & steel enclosure 32 Amps SPN AC box, complete all as specified and directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - III) Amount of Rs. 5398.50 during AOC Note:- Tenderers shall not quote for this Schedule

R.K. Works

BHARTI CONSTRUCTIONS

Hare krishna engineering const.

M/S R S CONSTRUCTION CO