Ireps

Active

Goods

Spinal Needle, No. 25G. Spec: SPINAL NEEDLE Disposable cutting bevel(Quincke type) spinal needle.with funnel shapped Transparent hub, with metallic stylet . The hub should be big grooved, colourless, transparent Identification System (prism and magnifying lens inside the hub) for improved visualization of CSF . Needle core hub with lock to keep the surface of needle bevel joint well oriented. Fitted stylet to minimize tissue coring. External diameter expressed in Gauge and mm. For 25G needle - 0.50x90 mm length. Colour code (orange)/external diameter: Visible at the base of the spinal needle. Components: Needle, stylet and sheath. Material: Stainless steel needle and stylet Clear ridged polycarbonate hub. Protective plastic sheath. . Disposable. Sterile single Pack. Initial sterilisation Method: Ethylene oxide gas. Standardisation EU-MDR/CE 0318/CE 0050 compliant. Proper brochure of the offered item should be submitted with tender offer. Only compliance of specification criteria without supporting documents/brochure will not be accepted.[AI(2026-27), Item Code-No: S-67002, SL no.2361]

Eastern Railway

Howrah, West Bengal

Amount: Refer DocsCloses: 26 Aug 20262d left

Timeline

Published12 Aug 2026
Closes26 Aug 2026

Corrigenda

Corrigendum

2 updatesLatest on 21 Aug 2026

Tender Value

Refer Docs

Closing Date

26 Aug 2026, 1:30 pm2d left

Bidding Terms

Bidding System

Single Packet

Tender Mode

Normal Tender

Pre-Bid Conference

Pre-Bid Conference On

Not Applicable

Evaluation Criteria

Itemwise/Consigneewise

Ranking Order

Lowest to Highest

Inspection Agency

CONSIGNEE

Approving Agency

Not Applicable

Offer Validity

90 days

Contract Category

Expenditure

Item Category

General

Tendering Section

Eligibility Criteria

2 conditions · 2 needing a document upload

Special Eligibility Criteria

1
i) Procurement will be made only from the manufacturer/Authorised dealer who are registered with PCMD/Eastern Railway. In case of Authorised Dealer , Firm should upload the valid authorization certificate of the OEM, failing which their offer will be summarily rejected. OEM s should comply with sub clause 19 of the amended GTC. ii) ii) This item is reserved to be procured through class 1/class 2 local supplier as per clause 28.0 of Eastern Railway GTC.
Document requiredConfirmation required
2
All bidder should upload pack shot, brochure and catalogue for the tendered item. Otherwise their offer is liable to be rejected.
Document requiredConfirmation required

Compliance & Declarations

29 conditions

Check List

1
The bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the IRS conditions of contracts and ( or ) specials conditions and (or) other conditions specified / attached with the Tender.
2
The bidder has gone through the Tender Documents consisting of Instructions to Tenderers , General Tender Conditions and IRS conditions of contracts before participating in the tender.
3
The offer must be kept valid for 90 days from tender opening date.
4
Firm has submitted documents in compliance with the "Applicable Terms and Conditions specific to Procurement of Medicines and Medical Consumables of Eastern Railway " as incorporated with Tender Document under clause 32.0 of General Tender Conditions of Eastern Railway .

Commercial-Compliance

1
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Confirmation required
2
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Document optional

Bid Responsiveness

1 condition

1
Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.

Delivery Locations

6 locations across West Bengal · 6,175 Numbers total

ACMS/HOWRAH, ERWest Bengal

2000.00 Numbers

CMO, METROWest Bengal

50.00 Numbers

CMS/ASANSOL, ERWest Bengal

1000.00 Numbers

CMS/LLH, ERWest Bengal

300.00 Numbers

CMS/MLDT, ERWest Bengal

125.00 Numbers

MD/BRSH/SEALDAH, ERWest Bengal

2700.00 Numbers

Delivery & Payment Terms

F.O.R

Destination

Delivery Period

For all items — Commencement : Within 0 Days of issue of Contract, Completion within 60 days from : Within 60 Days thereafter the date of PO

Payment Terms

100 % payment against receipt, inspection and acceptance of material by the consignee at destination.

Statutory Variation Clause

Statutory Variation in taxes and duties, or fresh imposition of taxes and duties by State/ Central Governments in respect of the items stipulated in the contract (and not the raw materials thereof), within the original delivery period stipulated in the contract, or last unconditionally extended delivery period shall be to Railways' account. Only such variation shall be admissible which takes place after the submission of bid. No claim on account of statutory variation in respect of existing tax/duty will be accepted unless the tenderer has clearly indicated in his offer the rate of tax/duty considered in his quoted rate. No claim on account of statutory variation shall be admissible on account of misclassification by the supplier/ contractor.

Option Clause

The purchaser shall be entitled to vary the order quantity upto + 30% anytime within the delivery period (including extended delivery period) on the same terms and conditions. The increase in quantity with respect to the tender quantity can be done even at the time of ordering and the tenderer shall be bound to accept the quantity so ordered on the basis of his original offer. The purchaser shall be entitled to exercise + 30% option clause in one or more than one installment as long as the total variation in quantity does not exceed the limit of 30% of ordered quantity.

Standard Governing Conditions

The contract shall be governed by latest version (along with all correction slips) of IRS conditions of contract, General Tender Conditions of Eastern Railway, and all other terms and conditions incorporated in the tender documents.

Work Description

Spinal Needle, No. 25G. Spec: SPINAL NEEDLE Disposable cutting bevel(Quincke type) spinal needle.with funnel shapped Transparent hub, with metallic stylet . The hub should be big grooved, colourless, transparent Identification System (prism and magnifying lens inside the hub) for improved visualization of CSF . Needle core hub with lock to keep the surface of needle bevel joint well oriented. Fitted stylet to minimize tissue coring. External diameter expressed in Gauge and mm. For 25G needle - 0.50x90 mm length. Colour code (orange)/external diameter: Visible at the base of the spinal needle. Components: Needle, stylet and sheath. Material: Stainless steel needle and stylet Clear ridged polycarbonate hub. Protective plastic sheath. . Disposable. Sterile single Pack. Initial sterilisation Method: Ethylene oxide gas. Standardisation EU-MDR/CE 0318/CE 0050 compliant. Proper brochure of the offered item should be submitted with tender offer. Only compliance of specification criteria without supporting documents/brochure will not be accepted.[AI(2026-27), Item Code-No: S-67002, SL no.2361]

Tender Information

Tender ID

22265509A~ER

Reference Number

22265509A

Tender Type

Limited - Indigenous

Form of Contract

Goods

Location

Howrah, West Bengal

Source Website

Subscribe to view

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

Exempted

Important Dates

Last Activity

12 Aug 2026

Published

12 Aug 2026

Items & Quantities

1 item · 6,175 Numbers total

PL 829069160015Goods (Y)

Spinal Needle, No. 25G. Spec: SPINAL NEEDLE Disposable cutting bevel(Quincke type) spinal needle.with funnel shapped Transparent hub, with metallic stylet . The hub should be big grooved, colourle ss, transparent Identification System (prism and magnifying lens inside the hub) for improved visualization of CSF . Needle core hub with lock to keep the surface of needle bevel joint well oriented. Fitted stylet to mi nimize tissue coring. External diameter expressed in Gauge and mm. For 25G needle - 0.50x90 mm length. Colour code (orange)/external diameter: Visible at the base of the spinal needle. Components: Needle, style t and sheath. Material: Stainless steel needle and stylet Clear ridged polycarbonate hub. Protective plastic sheath. . Disposable. Sterile single Pack. Initial sterilisation Method: Ethylene oxide gas. Standardisation EU -MDR/CE 0318/CE 0050 compliant. Proper brochure of the offered item should be submitted with tender off er. Only compliance of specification criteria without supporting documents/brochure will not be accepted.[A I(2026-27), Item Code-No: S-67002, SL no.2361] ]

Inspection Agency: CONSIGNEE
Stock Type: Non Stock
Considered for Evaluation: Yes

Delivery Location	State	Quantity
ACMS/HOWRAH, ER	West Bengal	2000.00 Numbers
CMO, METRO	West Bengal	50.00 Numbers
CMS/ASANSOL, ER	West Bengal	1000.00 Numbers
CMS/LLH, ER	West Bengal	300.00 Numbers
CMS/MLDT, ER	West Bengal	125.00 Numbers
MD/BRSH/SEALDAH, ER	West Bengal	2700.00 Numbers
Total		6,175 Numbers

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

HTML

NIT Documents

nit.pdf

NIT

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].