TRI COLOUR ILLUMINATION TO FACADE OF FORT MIRJAN IN CONNECTION WITH AZADI KA AMRUT MAHOTSAV UNDER MW CONS

Amount

TRI COLOUR ILLUMINATION TO FAÇADE OF FORT MIRJAN IN CONNECTION WITH AZADI KA AMRUT MAHOTSAV UNDER MW(CONS)

Providing illumination in connection with celebration of “azadi ka amrit mahotsav” to the monument in tri colour design concept for a period from 06/08/2022 to 15/08/2022 on hire basis to façade of the Fort Mirjan including transportation, scaffolding for fitting the lighting, wiring carrying, lifting, genset, LED power cans, without causing any damages to the monument, etc complete. LED power cans – 580 No’s Genset 82.5 KVA capacity including operation, diesel, etc

Supply with transportation to site of polygonal shape 15 mtr High mast pole with top dia150 mm, bottom dia 360 mm including pole accessories like double drum with motorized latern carrier arrangement, wire rope 6mm, aviation light, dome, Mast shaft shall be in two section, made of H.T. Steel of grade BSEN10025,S355JO hot dip galvanized and suitable for wind speed 180 Km/hr as per IS 875. Technical Specification. Bottom dia 360 mm, top dia150 mm thick , 3mm (bottomand top both) section - 2nos, length 6500 mm (Bottom), Base plate 560 mm dia, base plate thickness- 25 mm, foundation bolt M24. Bolt length 750 mm, No of holes 08 nos, Wire rope6mm SS 304 grade or as directed by engineer in charge.

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates

Providing and laying of steel reinforcement for RCC work including straightening, cutting, bending, placing in position including tying using binding wires etc. for foundation,as per the design as directed by the site incharge.

Providing and laying in position Reinforced cement concrete for all Foundation works. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates The granite/trap/basalt and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes ,labour,Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Provision for laying of 10mm/2 core aluminum cable from the existing power connection near toilet block to the flag mast including laying throung 1'' PVC Pipe, cost of material, labour complete as per instruction of site incharge.

Sharanappa S Shankinadasar