ADDITION/ALTERATION TO MESS BUILDING AND ALLIED SERVICES AT SRU DALHOUSIE

M & L for preparation of old painted steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrrugations side lap, fixed with coach screws and washers, in roofs, wall etc. with grade of zinc coating 275 complete all as specified.

M & L for preparation of new steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer over a coat of moderant solution to remove zinc coating complete all as specified and directed by Engineer-in-Charge

Demolition of brick work built in CM including all quoins arches pillars etc.

Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) with old size bricks.

All as per item No.5 above but except brick, complete all as specified and directed by Engineer-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removal of excavated and demolished material to a distance exc. 1.50 km but n exc. 5km and depositing complete all as specified and directed by Engineer-in-Charge.

M&L for M-25 grade cement concrete (20mm graded aggregates) slab supported on walls,beams and column in floors, roofs , landings, balconies,canopies, deck slabs and in shelves and the like as specified and directed.

M&L TMT bars 10 mm dia and over cut to length, bent to shape, required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

M&L TMT bars upto 8 mm dia and over cut to length, bent to shape, required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick wall including raking out joints hacking for key srcubbing down with water complete all as specified and as directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L15mm thick rendering in cement mortar 1:6 on fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed

M&L 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/lit and UV resistance as perIS 15489:2004, Alkali and funggal resistance , dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applieed @0.90litre/10sqm over new surfaces pattern complete all as specified.

M&L for old plastered surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/lit and UV resistance as per IS 15489:2004, Alkali and fungal resistance , dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applieed @0.90litre/10sqm over old surfaces complete all as specified.

M&L for Preparation new surfaces of walls and applying two coats of oil emulsion distemper over a coat of 3 mm thick wall putty complete all as specified and directed.

M&L for Preparation of old decorated wall surfaces and applying two coats of Oil bound distemper on walls over 3 mm thick wall care putty complete all as specified and directed.

M&L for preparation of new surfaces of ceilings and applying three coats of white wash on newly plastered surfaces of ceiling complete all as specified and directed.

M&L for complete removal of whitewash on old surfaces of ceilings and applying two coats of white wash complete all as specified and directed.

M&l for preparation of old decorated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coat of Synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frame with shutters (with out taking off the shutter from the frame ) n exc 1.5 sqm each

Taking down chowkats or frames incl shutter exc 1.50Sqm but nexc 4.00Sqm

S&F aluminium frame powder coated for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.

S&F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber packing, anodised aluminium snap beading screws etc, complete all as specified.

S&F 5.5 mm thick tinted/plain glass for aluminium windows/doors having each pane exc 0.5 sqm incl complete fittings all as specified and directed.

S & F Fe 410-w(Gde E 250)Framed work as in doors or gates of angle or other section with gusset plates,rails,braces ,etc.,complete drilled for fixing of steel sheeting or other covereing.Doors,etc.to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed by the Engir- in- Charge.

S&F 5 MM thick plain colour pvc backelight sheet in strips channel feathered at for fixing on aluminium frame partition.

S&F factory made single extruded WPC solid decorative type flush door shutters of size 30mm thick comprising of virgin polymer of K value 58-60 ( suspension grade), calcium carbonate and natural fibres ( wood powder/rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N ( face) & 900N ( edge), minimum compressive strength 50N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardnat . WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary fulll body threaded star headed counter sunk SS screws , all as per directions of Engr-in-charge.

S&F factory made single extruded WPC solid decorative type flush door shutters of size 35mm thick comprising of virgin polymer of K value 58-60 ( suspension grade), calcium carbonate and natural fibres ( wood powder/rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N ( face) & 900N ( edge), minimum compressive strength 50N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardnat . WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary fulll body threaded star headed counter sunk SS screws , all as per directions of Engr-in-charge.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F 100 mm butt hinges, heavy weight, cold rolled mild steel and fixed complete all as specified by Engr-in-charge.

S&F 150 mm size aluminium handles, cast type,anodised complete all as specified by Engr-in-charge.

S&F 150 mm aluminium anodised barrel tower bolts extruded section fixed complete all as specified by Engr-in-charge.

S&F in repair 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified.

S&F 125 mm Extruded aluminium alloy handles, fabricated type, anodised

S & F in repair for pre-fabricated stainless steel plate rack made out of 1 mm thick stainless steel plate jointed with brass screws of size 600 x 750mmx 250mm complete all as specified and directed

Supply & fix sheet glass ordinary quality 3mm thick n, exc 0.5 sqm in each pane

S&F in repair galvanised mild steel wire cloth nominal dia of wire 0.56mm and average width of aperture 1.00mm in wooden/steel frame complete all as specified and directed

Supply only Liquid water proofing compound

S&F in repair door closer hydraulically regulated made up of aluminium extruded section body universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified. Make :- Godrej/Samart

Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and directed

Demolition of concrete in ground floor not exceeding 15cm in thickness below or above ground level including floor finish such as tiles of any thickness and any description etc. complete all as specified and as directed by Engineer in Charge.

M&L 15mm thick screed bed or bedding layer of cement mortar 1:6 to laying floor finish complete all as specified and as directed by Engineer in Charge.

M&L non skid ceramic colour tiles 7 to 8 mm thick joint free edge cut (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm(400mmx400mmx7 mm thick) set and jointed in neat cement slurry and pointed in colour cement to match as in floor complete all as specified and as directed

M&L glazed ceramic colour tiles 300mmx450mm/300mm x200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over cement mortar rendering/screding 10mm thick 1:4 complete all as specified and as directed

S&F vitrified ceramic tiles light shade double charged 10 mm thick (square/rectangular) polished area of each tiles exc 0.36 not exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete and all as specified

All as per ser item No 49 above but in skirting and dado including ,10mm thick kscreed bed in CM 1:4 complete and all as specified

M & L PCC 1:3:6, type C-2, 75mm thick as in plinth protection, Surface finished fair and smooth without using extra cement.complete and all as specified

M&L for 20mm thick granite black slab, machine cut, well polished, bedded in 15mm thick in CM 1:4 as in cooking plaforms & like and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting and polishing etc. complete all as specified and directed.

M & L for coloured chequered cement concrete tiles 22 to 25mm thick, set jointed and pointed in neat cement slurry in floors, with grey cement and pigment except tile complete all as specified and as directed by the Engineer-in-Charge

M&L screed bed or bedding layer of mortar 15mm thick in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

M&L for 100mm thick PCC 1:2:4 type B-2 (using 40mm graded aggregate), spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified.as in floors complete all as specified by Engr-in-charge.

M&L for repairing of RCC projections, chajjas , roofs, facia etc. in patches not exceeding 3 Sqm in each patch by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sqmtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor.

Supply and fixing factory made 25mm thick solid WPC(wood particle composit) sheet one side prelam sheet (of pattern as approved by GE)and other side wood nature colour for cupboard shutter of density 600 kg /Cbm bent 90° incl 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level for making edges lipping using binding tape etc. Complete as per direction of Engr-in-charge, Manufacture specification.

Supply and fixing in repair factory made 18/19 mm thick solid WPC(wood particle composit) without prelam sheet having both side wood nature colour for cupboard partitions/slabs of density 600 kg /Cbm bent 90° incl 100% termite/water proof, fire rertradent, Eco friendly, complete as per direction of Engr-in-charge, Manufacture specification.

Supply and fixing factory made 5mm thick PVC sheet one side prelam sheet for kitchen cabinet/cupboard of density 600 kg /Cbm bent 90° complete all as specified and directed.

M & L for 0.80 mm thick PVC edge binding tape around the 18 to 20 mm thick PVC shutter edge colour as directed, complete all as specified and directed.

S&F 200 mm long fancy type stainless steel handels for shutters complete all as specified and directed.

S & F continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 40 mm all as specified and directed.

S & F 100mm size hasp and staple,stainless steel safety type, fixed with screws complete all as specified and directed

S & F 50 mm dia polished hardwood knobs fixed with screws complete all as specified and directed.

S & F high quality Magnet ball catcher for cupboard shutter, complete all as specified and directed.

S & F for stainless steel plain basket of size 17'' x 20'' x 6'' complete all as specified and directed by EIC. Make : Evershine/Homechoice/Hatic

S & F for stainless steel partition of size 17'' x 20'' x 6'' complete all as specified and directed by EIC. Make :Evershine/Homechoice/Hatic

S & F for stainless steel cutlery of size 17'' x 20'' x 6'' complete all as specified and directed by EIC. Make : Evershine/Homechoice/Hatic

S & F for stainless steel grain troly with stand of size 21" x 17" x 10" complete all as specified and directed by EIC. Make : Evershine/Homechoice/Hatic

S & F for stainless steel cup & soucer of size 17" x 20" x 4" complete all as specified and directed by EIC. Make :Evershine/Homechoice/Hatic

S & F for stainless steel plate basket of size 17'' x 20'' x 6'' complete all as specified and directed by EIC. Make : Evershine/Homechoice/Hatic

S & F for 20'' long telephonic slider to facilitate drawer slide of steel ball bearing fixed with steel screws complete all as specified and directed by EIC. Make : Nixon/Rodal/Ozone/Ultima or equivalent of Intex.

S & F for Auto hinges for cabinet case. Make Karf/Hetich

S&F in repair in Art western white viterous china rimless wall hung WC of size 380 x 525 x 350mm with single peice slim concealed cistern of 6/3 Ltrs incl floor mounted frame European water closet with CP bolts, nutsC.I. chair or other hanging arrangements with UF soft close seat cover , Bakelite/polypropylene seat and cover with CP hinges & rubber buffers, CP brass screws , trap,washer with all accessories incl flush plate of chrome of size and pattern as approved by GE.

S&F in repairs decorative shape type Counter top Vitreous china wash basin, white of,size 495mm x 395mm x 150mm mm including CP waste coupling full thread of suitable sie of wash basin and waste pipei ncl fixing of central hole mixer all as spd and directed. Note : fixing of wash basin on granite/any type of surfacewith adhesive or any type of material deemed to be included in rate quoted by contractor.

S&F in rep for Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size not less than 400mm x 350mm x 180mm and including swan neck CP mixture and necessary fittings for mixing hot and cold water complete all as specified and directed.

S&F fancy type long body Bib taps for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and directed.

S&F in repair CP 3-in-1 wall mixture with telephonic shower for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and directed.

Supply only chromium plated brass central hole single lever WHB Mixture for table top wash basin 15 mm bore for mixing hot and cold water with 450 long braided house 20 cartriage size screwed down, high pressure screwed for iron pipe complete all as specified and directed.

Supply and fixing fancy type stainless steel shower rose with arm of pattern and size as approved by GE complete all as specified and directed.

S&F PVC connection, 60cm long, 15mm in size with PTMT nust and PVC washers at both ends complete all as specified

S&F CP grating doom 125 mm dia with cockroach trap fixed properly to the floor and sealed properly and finished with white cement complete all as specified.

S&F CP grating doom 125 mm dia with waste hole and cockroach trap fixed properly to the floor and sealed properly and finished with white cement complete all as specified.

S&F 32 mm dia bore PVC flexible pipe for wash hand basiin and kitchen complete all as specified.

S&F 15mm dia Angle cock chromium plated brass fancy type ,screwed down , high pressure, scrwed both ends for iron pipe in repair.

S&F in repair Soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified .

S&F CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges

Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Taking down steel water tubing 15 mm with all fittings from walls, ceiling and floors, complete all as specified.

Taking down steel water tubing 20 mm with all fittings from walls, ceiling and floors, complete all as specified.

15mm GI tubes medium grade with all fittings & fixed complete to walls or ceilings or laid in floors.

ditto- but 20mm dia.

S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in repair.

S&F 2000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in repair.

S&F in repair Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe, complete all as specified and directed.

S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

S&F 15mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

Dismantling cast iron work of any description

S&F 110mm PVC(SWR) Branch pieces, single T (equal or unequal).

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints of bore 110mm complete, all as specified, fix to wall.

S&F 110mm PVC (SWR) bore Bend any radius

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in tranches or in floor of bore 110mm complete, all as specified

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor of bore 75mm complete, all as specified.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall of bore 75mm complete, all as specified.

S&F 75mm PVC(SWR) Branch pieces, single T (equal or unequal)

S&F 75 mm PVC(SWR) bore Bend any radius.

S&F PVC(SWR) Vent cowls 110mm bore

S&F PVC SWR 75mm floor trap , plain with grating including jiointing with solvent cement complete all as specified and directed .

S&F Rolled mild steel section as in joist, chanel, angle, or tee section fixed independently without connecting plates, etc (cut to ordinary length i,e within 20mm of the length indicated) of Fe-410w(Gde-E-250) quality A complete all as specified an directed

M&L for preperation and Painting to steel surfaces n exc 10cm in width or girth with one coat of synthetic enamal paint over one coat of redoxide primer complete.

S&F in repair Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe, complete all as specified and directed.

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring from existing place i.e. light, fan, socket or power points , submain wiring complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of paris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.

Taking down main switch/DB/ changeover/AC box of any capacity including fixing accessories of single/three phase complete all as specified and directed by Engineer-in-Charge.

M&L in replacement of Concealed point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLSH insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead/telephone socket etc with MS screw and cup washers including PVC-FRLSH insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following:- (a) One light, fan, bell point controlled by one switch.

(b) One light point controlled by two 2-way switch

(c) 5 Amp independent socket point controlled by one switch.

(d) One 5 Amp socket point controlled by one switch on same board

All as per item No 3 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

M&L in replacement of sub main wiring with two single core PVC-FRLSH insulated unsheathed multi stranded copper conductor cable of size 10.0 sqmm drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc laid in concealed position with 10.0 Sqmm PVC-FRLSH insulated unsheathed multi stranded copper conductor as a continuous earth wire including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of paris/ Putti or distemper / colour wash with same existing colour surfaces including taking down old submain wiring complate all as specified and directed by Engineer-in-Charge

Ditto as per item No 5, but size 4 sqmm complete

S&F Modular switch single pole one way 5/6 Amps, 240 volts, white finish, ISI marked complete all as specified .

S&F Modular Switch single pole two way 5/6 Amps, 240 volts, white finish, ISI marked complete all as specified .

S&F Modular Switch single pole one way 16/20 Amps, 240 volts, white finish, ISI marked complete all as specified .

S&F Modular Socket outlet 5 pin, 5 Amps, 240 volts white finish, ISI marked complete all as specified.

S&F Modular Socket outlet 2 in 1, 3 pin, 5 &15 A, 240 volts white finish, ISI Marked complete all as specified.

S&F Modular Bell push, flush type 5 Amps white finish, ISI Marked complete all as specified.

S&F Modular metal flush box 1/2 module with all fittings duly grouted in wall complete all as specified and directed.

S&F Modular metal flush box 3 module with all fittings duly grouted in wall complete all as specified and directed.

S&F Modular metal flush box 4 module with all fittings duly grouted in wall complete all as specified and directed.

S&F Modular metal flush box 6 module with all fittings duly grouted in wall complete all as specified and directed.

S&F Modular white cover plate with frame 1/2 module complete all as specified and directed.

S&F Modular white cover plate with frame 3 module complete all as specified and directed.

S&F Modular white cover plate with frame 4 module complete all as specified and directed.

S&F Modular white cover plate with frame 6 module complete all as specified and directed.

S&F in replacement of Door bell multi music type 230V, single pole, ISI Marked complete all as specified.

S&F in replacement of Ceiling rose, surface backlite, 65 x 20 mm three terminal ISI Marked complete all as specified.

S&F in replacement of Modular Fan step regulator, 120W - 2 module ISI Marked complete all as specified.

M&L for taking down existing ceiling fan from ceiling hook and refixing again with suitable down rod after cleaning fan and blade complete.

S&F Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base, 230 Volts, including LED lamp 9 Watt complete and electrical connection with three core copper cable from ceiling rose to led light fitting all as specified and directed.

S&F in replacement of Sheet metal enclosure VTPN MCCB DB 4way, 415 V (vertical type) with bus bar double door type IP 43 - IK 09 as per IEC 61439-3 suitable for flush mounting complete with 250 A copper bus bar for each phase with 2 neutral and 2 earth bus bars with cable ties for cable management for DB's when MCBs & MCCB 100 Amps (as incomer) to be used, fixed properly in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires all as specified and directed.

S&F in replacement of MCCB 100 Amps, 3 Pole, 415V, 16 KA with thermal magnetic protection adjustable type with short circuit and overload protection complete all as specified and directed by Engr-in-charge.

S&F in replacement of Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed. Make - Legrand/Scheinder/L&T

All as per Sr No 28, but SPN 8 ways

All as per Sr No 28, but TPN 8 ways, 415 Volts

Supply and fixing in replacement of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs.

All as per item srl item No 31 but SPN 16-40 Amps

All as per item srl item No 31 but TPN 40 Amps, 415 Volt.

S&F Sheet metal enclosure , 32A single pole and neutral with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB 32 Amp fixed properly complete all as directed by Engr-in-Charge

S&F MCB protected socket combo box of ratting 16 Amps with sheet steel enclosures for AC complete. Make: Havells/Legrend/L&T

S&F in replacement of Decorative ultra slim linear LED lighting fixtures with extruded polycorbonate environmental friendly energy saver LED light fitting 1x20 watt (4'), 230 Volts, single tube mounting including LED Tube 20 Watt complete with electronic driver spring loaded rotory type lamp holder, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection with three core copper cable from ceiling rose to led light fitting all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V ACd ecorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

S&F in replacement of building security light fitting new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 of 35 watt LED, 240 Volts incl bracket made out of GI pipe 25mm dia medium grade, 0.9 mtr long bent to shape with welded MS flat 25 x 6 mm for mounting of fitting & MS flat iron clamps made out of 25mmX 6mm thick FI nuts, bolts complete all as specified and directed by the Engr-in-charge.

S&F in replacement of Gyser including installation and testing of ISI marked, energy efficient, water heater storage type made of ultra-thick super cold rolled steel plates, incoloy glass-coated heating element offering superior heating performance, electrically operated, single phase, 50 Hz (BEE 5 star rating), complete of 25 Ltr capacity suitable to withstand 8 bar pressure with whirlflow technology and adjustable knob for convenient setting of temperature with and including supply and fixing, wire armoured 450 mm long, 15 mm dia brass coupler etc, flexible pipe suitable to withstand upto 100 degree celcius for hot and cold water, anchor fastner - 04 Nos of suitable size, 3 core PVC insulated, FRLSH multistranded copper conductor cable and plug top 15 Amps capacity complete in all respect all as specified and directed by Engr-in-Charge. Note : Old unserviceable geyser is to be deposited to MES store yard.

S&F heavy duty exhaust fan AC single phase 230/240 V of size 300 mm sweep 1400 RPM with louver & shutter including connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and necessary grouting on wall complete and making good the wall surface after fixing of exhaust fan all as specified and directed by the Engr-in-charge. Note : Old unserviceable Exhaust fan is to be deposited to MES store yard.

S&F exhaust fan of size 250 mm sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding including connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and necessary grouting on wall complete and making good the wall surface after fixing of exhaust fan all as specified and directed by the Engr-in-charge.

S&F in replacement of LED street light fitting 90 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket wit h impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S&F in replacement of street light pole box suitable for fixing on LT pole size 200x160x98 mm 25 sqmm Terminal block 4 Nos, 4 sqmm Earth terminal 1 No with suitable gland , door and locking arrangment and suitable for terminal single phase including MCB 6-10A SP and fixing in position with nut, bolt, clamp, disconnection and reconnection of service wire/UG cabel in box incl dismentling old street pole box all as specified and directed. Make Hensell,Sintax and Anchor

S&F three phase AC Surge Protector 4 Module (3Ph +N) , 230/400 V, max discharge current 50 kA, IP 20 prortection for main switchborad Type 2 : Protection against indirect lightning and switching surges, Conforms to IEC 61643-11 including provision of suitable size of transparent PVC housing/enclosure with all necessary connection and grouting on wall complete and making good the wall surface after fixing it all as specified and as directed by Engr-in-charge. Make: Citel/L&T/Legrend

S&F Single phase electronic meters tamper proof LCD display with polycarbonate cover 230 V of rating 10 Amp to 60 Amp, accuracy class I 50 Hz, confirming to IS 13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH including provision of suitable size of transparent PVC housing/enclosure with all necessary connection and grouting on wall complete and making good the wall surface after fixing the meter all as specified and as directed by Engr-in-charge.

M&L in replacement of earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level ) with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to earth lead wire 4 mm as earth lead by means of bolts, nuts washers and check nuts of steel/GI duly protected with 20 mm bore light grade pipe upto main board , 20mm bore watering pipe light grade with CI/MS funnel and wire mesh including excavation , earth work in any type of soil and removing the surplus soil to a distance not exceeding 50 Mtr, add charcoal dust and common salt as diirectred by the Engr-in-charge all as shown in electrical plate No. 03 of SSR part-I 2009 having pit in PCC 1:2:4 type B-1 including angle iron frame made of angle iron of size 40x40x6mm grouted in PCC pit for CI cover of required size, funnel with wire mesh complete and all as specified and as directed by Engr-in-charge.

Supply, laying testing and connecting 35 Sqmm 3.5 Core XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electrical cable with aluminium conductor, 1100 volts grade laid in trenches/ducts/wall or through pipe with suitable size of cable glands, crimping type cable lugs complete all as specified and directed by Engr-in-Charge.

Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified.

Material & labour for tubing GI light grade 50mm bore laid in trenches, ducts, floor for protection of cable, fixed to wall or poles including fixing arrangement all as required and directed by Engineer-in-Charge.

PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of Pole, Transformer, Panel board, stay, post top lantern, repairs to road cutting, drain, path etc complete all as specified and directed.

Supply, fix and laying of DWC pipe of size 50/38 mm dia (outer dia) with coupler including passing the LT Cables of size 16-70 sqmm through the DWC pipe for protection of cable all as per direction of Engr-in-Charge. Make

S&F of cable route indicator for LT UG Cable of 1100 Volts 50 mm dia CI Plate marked on LT cable bolted with 40 x 5 mm flat iron member of height 0.7 mtr, embedded in PCC 1 : 3 : 6 type C2 of size 20 x 20 x 30 cm block complete all as specified and directed.

Taking up or down steel tubing of 15 mm bore and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete with all fittings & valves etc. (Excavation shall be measured and paid separately under relevent items)

Relaying only GI pipes of size 15 mm bore in trenches including thorough cleaning and descaling internally complete all as specified and directed. (to be measured only found serviceable in all respect retrived from item No- 01).

M&L in replacement for laying tubes medium grade galvanized with all fittings laid in trenches of size 15 mm bore dia.

S&F in replacement of Gun metal globe or gate valve iron wheel head, screwed both ends for iron pipe of bore of 15 mm and length as required on site or directed by engineer-in-charge.

M&L in replacement for Lagging to pipe all around with 40mm thick bonded mineral wool perfomed 'SNAP ON' pipe section of density 144kg/cum and provided with chicken mesh wire netting 25 gauge 20mm mesh on pipe of internal dia 25/20 mm including rendering cement plastering 15mm thick (1:3) on top layer of lagging all as per specifed & as directed by Engineer -in-charge.

M&L in replacement for construction of valve pit brick masonry internal size 600x600x600mm (from top of PCC to bottom of cover ) including excavation in any type of soil returning, filling in around foundation and removal of surplus soil to a distance not exceeding 50 mtr, PCC 1:4:8 type D2 in foundation brick work in cement mortar 1:6, 6mm thick plaster in cement morter 1:4 to internal surface covered pit with MS sheet over 2 mm thick with locking arrangement, handle fixing arrangement and painting with aluminium paint two coats over a coat of red oxide primer all as per specified and as dircted by Engr-in-charge.

S&F in replacement of copper strip 20x3mm complete with saddles/ insulators made out of PVC or fibre and fixing screws for roof conductor/down conductor including welding or brazing for joints all as required at site or as directed by Engr-In-Charge.

S&F in replacement of air termination single pointed copper rod 12mm dia and 300mm long complete.

M&L in replacement for test point terminal block made of gun metal or phosphorus bronze of size 75X75X6mm drilled and screwed including 03 Nos 8mm dia 25mm long hexagonal head screw complete all as specified and directed by Engr-in-charge.

S&F in replacement of GI tubing light grade 25 mm dia, cut to size and bent to shape all as required at site including fixing arrangement with necessary clamps of required size at site and providing appropriate size of insulators to pipe from foundation of air termination rod complete all as specified and directed by Engr-in-charge.

M&L in replacement of Earthing complete with copper earth plate electrode 600x600x3.15 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level ) with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to copper strip 20X3 mm as earth lead by means of bolts, nuts washers and check nuts of steel/GI duly protected with 40 mm bore light grade pipe upto main board , 20mm bore watering pipe light grade with CI/MS funnel and wire mesh including excavation , earth work in any type of soil and removing the surplus soil to a distance not exceeding 50 Mtr, add charcoal dust and common salt as directred by the Engr-in-charge all as shown in electrical plate No. 03 of SSR part-I 2009 having pit in PCC 1:2:4 type B-1 including angle iron frame made of angle iron of size 40x40x6mm grouted in PCC pit for CI cover of required size, funnel with wire mesh complete and all as specified and as directed by Engr-in-charge.

Please Enable Macros to View BoQ information