REPAIR TO ARRESTING SEEPAGE LEAKAGE FROM SUNKEN SLAB OF TOILET BATHROOM KITCHEN AND JOINERY WORKS TO CERTAIN SMQS UNDER AGE B R I OF GE AF ADM AREA KHERIA AGRA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches pillars etc excl ashlar facing dressed stone work and pre-cast concrete articles complete all as specified and directed.

Demolition of cement concrete/ lime concrete terracing of any description & in any portion not otherwise specifically provided for & removal of demolition material to a distance exc 250 m and n.exc 500m complete all as specified and directed.

M&L for brick work with sub class ‘B’ brick straight or curved on plan exc 6 M means radius built in CM (1:6) complete all as specified and directed.

M&L for PCC (1:1.5:3) type A-0 (using 12.5 mm graded aggregate stone aggregate) mixed with WPC @ 2% by weight of cement or as per manufacturer's instructions, as in padding/ correction of slope in sunken slab complete all as specified and directed. Note :- WPC shall be measured and paid seprately.

M&L for PCC (1:5:10) type E2 (using 40 mm graded brick course aggregate) as in sunken portion complete all as specified and directed.

M&L for 15 mm thick cement plaster in CM (1:3) on fair faces of brick work finished even and fair mixed with WPC @ 2% by weight of cement or as per manufacturer's instructions complete all as specified and directed. Note :- WPC shall be measured and paid seprately.

M&L for 25 mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in sub floor/ levelling course complete all as specified and directed.

Supply only polymer based liquid water proofing compound conforming to IS complete all as specified and directed.

M&L for water proofing treatment to sunken slab with APP based polymeric membrane, 3 mm thick (minimum), weighing 3.5 Kg/ sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/ sqm) shall be applied over and including applying one coat of hot blown bitumin grade 85/ 25 confirming to IS- 702 @ 1.2 Kg per Sqm over a coat of bituminous primer @ 0.3 litre per sqm surface, application of APP modified membrane joint shall be by torch application. The overlaps shall be minimum 100 mm on the transverse direction and 75 mm longitudinal direction complete all as specified and directed. Make : (i) SUPER THERMOLAY manufactrued by M/s STP limited. (ii) IWL (HYPERPLAS POLYSTER) manufactured by M/s IWL India Ltd. (iii) Pidilite Industries. (iv) M/S Sikka industries WP Shield

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings and making good cutting n exc 10cm girth complete all as specified and directed.

M&L for non skid ceramic tiles, coloured, (area of each tile exc 0.06 sqm but not exc 0.11 sqm) x 7mm thick in floors etc set and jointed in neat cement slurry and white or coloured cement to match, design & pattern over & including 15 mm thick screed bed in CM 1:4, including dismantling the existing floor tiles of any description complete all as specified and directed.

M&L for glazed ceramic colored tiles first quality of size 200 mm x 300 mm, 7 mm thick, on vertical surfaces such as skirting/ dado etc set & jointed in neat cement slurry & pointed with white or coloured cement to match over and including 10 mm thick rendering in cement mortar 1:3, ncluding taking down of existing wall tiles complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white (excl fixing bolt flushing cistern and flush pipe ) fixed complete with seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed.

S&F in repair vitreous china, squaiting pan 'ORISSA' pattern, white of size 580 mm x 440 mm, with 'P' or 'S' trap front or back inlet and foot rests any pattern fixed complete all as specified and directed.

M&L in repair for PVC (SWR) floor trap plain 75 mm dia of outlet with grating including, jointing with solvent cement diameter of outlet 75mm complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends with accessible door any radius complete all as specified and directed.

M&L for scraping out loose mortar/concrete by chiseling/ wire brushing complete and applying rust removing solution (rebaklene solution) to exposed corroded reinforcement and applying a coat of epoxy primer (Nitozink primer from M/s Fosroc or equivalent as approved by GE) as per manufacturer instructions providing and fixing of wire mesh of weight 2.5 Kg per Sqm and apply 25 mm average thickness in CM (1:4) mixed with liquid integral water proofing compound (complast 'X' recommended by the manufacture with gunitting machine at a pressure not less than 5 Kg/Sqcm finally rendering 10mm thick plaster in CM (1:4) using liquid integral water proofing compound (complast 'X' 421 i.e. from M/s Fosroc and Nitobound AR from M/s Fosroc or equivalent as approved by GE) in the proportion recommended by the manufacture complete all as specified and directed.

Cutting of old rusted reinforcement 10mm dia and over M&L for welding of new TMT bars 10mm dia and over cut to length and as directed.

Taking down cement or cement lime plaster of any description on brick work or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick work finished even and fair mixed with WPC complete all as specified and directed. Note :- WPC shall be measured and paid seprately.

M&L for 15mm thick cement plaster in CM (1:6) on other than fair faces of brick work finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick cement plaster in CM (1:4) as in ceiling on fair faces of concrete surfaces finished even and fair complete all as specified and directed.

M&L for prepartion of newely plastered surface of walls and applying two coats of cement base paint over a coat of cement primer complete all as specfied and directed.

M&L for three coats of white wash on newly plastered surfaces as on wall including preparation of surfaces complete all as specified and directed.

M&L two coats of white wash on newly plastered surfaces on ceiling including preparation of surfaces, complete all as specified and directed.

Disconnecting existing water storage tanks setting aside (or lowering if required) for repairs and hoisting reconnecting and refixing incl cleaning in position exc 250 litres and n. exc 500ltr capacity complete all as specified and directed.

Taking up or down steel water tubing and connections 15 mm bore complete all as specified and directed

Taking up or down steel water tubing and connections 20 mm bore complete all as specified and directed

S&F 15 mm bore steel water tubes medium grade galvanized with all fittings and fixed complete to walls ceilings or laid in floors complete all as specified and directed.

S&F 20 mm bore steel water tubes medium grade galvanized with all fittings and fixed complete to walls ceilings or laid in floors complete all as specified and directed.

Re-fixing old steel tubing and connections in new or old position 15 mm bore with new GI fittings complete all as specified and directed.

Re-fixing old steel tubing and connections in new or old position 20 mm bore with new GI fittings complete all as specified and directed.

S&F in repair stop valves cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both ends for iron pipe 15mm bore, ISI Marked complete all as specified and directed.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S & F in repair PVC flushing cistern ISI marked of 10 litres capacity valveless, syphonic action type, low level, white with inlet, ball valve, float & handle including brackets and 32mm dia PVC pipe complete all as specified and drected.

S&F in repair CP bib tap, 15 mm dia, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair swivel shower with arm of CP fixing with 15mm pipe complete all as specified and directed.

S&F in repairs gratings of 100mm dia made of stainless steel with waste hole complete all as specified and directed

S&F in repair wash hand basin vitreous china, white, flat back of size 580 mm x 450 mm including supply and fix angle iron brakets errecting stand and 1 No,15 mm bore CP pillar tap, fancy type, CP waste coupling, PVC waste pipe 32 mm bore, and 01 No PVC connection 450 mm long complete all as specified and as directed .

S&F in repair stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Taking down of chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down of chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down of shutters of any description n exc 1 sq.m each complete all as specified and directed.

Taking down of shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

Refixing in same or other opening shutters of any description n exc 1 sq.m each complete all as specified and directed.

Refixing in same or other opening shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

S & F mild steel angle iron or any other section as in frame work for chowkhat and steel shutter conforming to Fe 410 W for frame work incl necessary welding etc complete complete all as specified and directed.

S&F 2nd class hardwood ( Sal, Bijasal, Hollock) plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 2nd class hardwood ( Sal, Bijasal, Hollock), 35mm thick glazed & skeleton door shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc. as in door shutter, etc. are provided with stiles & rails as specified in SSR Part I complete all as specified and directed.

S&F 2nd class hard wood ( Sal, Bijasal, Hollock), 30mm thick glazed & skeleton window shutters, open rebated & prepared to receive glass, gauze, etc. (with sash bars) as in window, edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc. sizes of members of shutters as specified in SSR Pat-I complete all as specified and directed.

S&F 35 mm thick flush door shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame but 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face at site as per specification & drawing.

S&F stainless steel butt hinge 100mm long cold rolled complete all as specified and directed.

S&F mild steel butt hinge 75mm long cold rolled complete all as specified and directed.

S & F aluminium, anodised, barrel tower bolts of extruded section and fixed length of bolt 200 mm complete all as specified and directed.

S & F aluminium handle cast type anodised of size 100mm completed all as specified and directed.

S & F aluminium, anodised, barrel tower bolts of extruded section and fixed length of bolt 150 mm complete all as specified and directed.

S & F aluminium handle cast type anodised of size 75mm completed all as specified and directed.

S&F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F for MS work as in hold fast and similar small articles conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 with (using 20mm graded stone aggregate) as in cill, step and for inserting hold fast of doors and windows including necessary formwork complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over one coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation new surfaces complete all as specified and directed.

M & L for applying two coats of synthetic enamel paints over one coat of pink primer on wooden surfaces over 10 cm width or girth including preparation new surfaces complete all as specified and directed.

M&L preparing surfaces of wood and wood based materials, treating ends of posts, backs of chowkhats, etc, area tarred exc 0.1 sqm but n,exc 0.5 sqm each complete all as specified and directed.

M&L preparing surface of wood & wood based materials, steel & iron work, new or old, & treated with tar or coal tar black paint, area n exc 0.1 sq. m each, treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc complete all as specified and directed.

S&F galvanised mild steel steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and with stainless steel wire staples fixed to wooden or steel windows/doors complete all as specified and directed.

S&F in repair galvanised mild steel steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and with stainless steel wire staples fixed to wooden or steel windows/doors complete all as specified and directed.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

S & F in repair 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

S & F 3 mm thick figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

M/s K S Builders

deva engineers

Sethi Brothers

Asha Construction

Rakesh kumar

POOJA ENTERPRISES