REPAIR/ REPLACEMENT OF DOORS, WINDOWS, CEILING AND WALL PANELLING UNDER AGE B/R II OF GE SUKNA IN SUKNA MIL STN

Amount

Supply only integral water proofing compound complete all as specified.

S & F of 2nd class Hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails sectional area not exc. 3 sqcm complete all as specified and directed.

S & F of 2nd class Hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails sectional area exc 3 but not exc. 6 sqcm complete all as specified and directed.

S & F of 2nd class Hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails sectional area exc 6 but not exc. 13 sqcm complete all as specified and directed.

S & F of 2nd class Hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails sectional area exc 13 but not exc. 25 sqcm complete all as specified and directed.

S & F of 2nd class hard wood in scantling, clean sawn in any position and any description as in framed work complete all as specified and directed.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each complete all as specified and directed.

Taking down door shutter of any description n exc 1 sqm each complete all as specified and directed.

Taking down door shutter of any description exc. 1 but n exc 2 sqm each complete all as specified and directed.

S&F rubberised door seal 50 mm width including fixing with nails or adhesive with door complete all as specified and as directed.

S&F 30 mm thick pre-laminated medium density fibre (MDF) board flush door shutter, both side laminated of approved colour, exterior grade complete all as specified and directed.

S&F 30 mm thick factory made flush door shutters solid core construction, with particle board core and plywood face fanels, commercial type on both side complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wire gauze in lieu of plain colour PVC sheet. The wire gauze shall be wrapped on an additional square 8mm MS Solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly, suppling & fixing in the framecomplete all as specified and directed.

S & F factory made Solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F in repairs stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks of galvanised wire staples complete all as specified and directed.

S&F telescopic sliders with ball bearings, as in kitchen shelves, 45 mm wide, 450 mm long, fully extendable to 900 mm, fixed to plywood with screws, complete all as spd and directed.

S & F in repair 125 mm long Brass butt hinges, with mild steel hinge pin, bright polished, type B-12, medium weight cold rolled complete all as specified and directed.

All as per item no. 19 above but 50mm long.

S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S&F 150 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 150 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed.

S&F 150 mm Brass handle extruded fabricated type, and fixed complete all as specified and directed.

S&F 100 mm Stainless steel handles fancy type, handles for cupboard, cabinets, etc and fixed complete all as specified and directed.

S&F in repair 75 mm Rim latch with two levers, of mild steel body. stove enamelled finish; with brass knob or lever handle / Rim latch with two levers, of brass body. polished bright / aluminium alloy body. anodised complete all as specified and directed.

S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F of 300 mm long (Length of bolt) brass sliding door bolt with sand or die cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed.

S & F of 140 mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S & F of 40 mm wide flap when open, mild steel bright finish or electro galvanised continuous (Piano) hinge complete all as specified and directed.

S&F in repair mortice lock, vertical type, size 65 mm four lever of Brass complete all as specified and directed.

S&F in repair mortice lock, vertical type, size 100 mm four lever of Aluminium complete all as specified and directed.

S & F in repair of Door closer Aluminium(Die cast) body Hydraulically regulated ( designation No. 3) universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 t0 80 kg complete all as specified and directed.

S&F magnetic catch of size not less than 40 x 15 mm suitable for cup board complete all as specified and directed.

S&F 10 mm thick PVC insulation panel with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n. exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre and necessary hangers 6 mm dia GI fixed to roof and including dismantling complete all as specified and directed.

M&L decorative type plaster of paris work of size not less than 75 mm x 75 mm, as in cornice or junction of wall and ceiling complete all as specified and directed.

M&L decorative type plaster of paris work of size not less than 50 mm x 50 mm, as in cornice or junction of wall and ceiling complete all as specified and directed.

S & F of 6 mm thick plywood BWR grade type – BB, fixed with screws to timber frame as in linings, panelling similar location including Dismantling complete all as specified and directed.

M & L for 12 mm thick (7 Nos of ply) veneered decorative plywood grade 1 (with BWR resin) with decorative face veneers on one face and fixed with nails to timber frame as in linings, wall panelling including dismanting complete all as specified and directed.

S&F powder coated aluminium anodised door, window, cupboard and ventilator shutter and frame any type (Sliding or openable) with frame and other similar work, fabricated aluminium mesh etc. aluminimum heavy section fabricated including all necessary roller wheels, cleats, handle, locking arrangement and arrangement to fix wire mesh with aluminium channel beading and stainless steel screw including cost of rubber gasket, beading roller wheel etc. complete all as specified and directed. Note:- (a) The weight of rubber gasket beading, roller wheels, etc will not be measured with the weight of aluminium shutters as only aluminium items shall be measured. (b) Wiremesh shall be measured and paid separately. (c) Aluminium hinges shall be included in the unit rate.

S & F of pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc.and including P.C.C. (1:3:6) for filling in frame and fixing of hold fast, complete all as specified and directed.

S & F of pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc.and including P.C.C. (1:3:6) for filling in frame and fixing of hold fast, complete all as specified and directed.

S & F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections), including distance pieces, cleats etc. including cutting, welding etc. confirming to Fe – 410 – W(Gde E - 250) quality 'A' Including Dismantling complete all as specified and directed.

S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Gde E -- 165 including Dismantling complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws including dismantling of old AC Sheet complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws including dismantling of old AC Sheet complete all as specified and directed.

M & L in Repair 9 mm thick Pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination and fixed with screws to timber/ aluminium framework with suitable beading/ shap grid complete all as specified and directed.

M & L 12 mm thick Pre-laminated particle board, exterior grade, pre-laminated both side with decorative lamination and fixed with screws to timber/ aluminium framework as in linings, panelling similar location complete all as specified and directed.

S & F in Reapir 18/19 mm thick particle board, medium density, flat pressed, single layer or three layers type with BWR type adhesive and fixed with screws to timber frame works as in cupboard, shutters, partitions, shelves and similar work with teak wood beading at the edges complete all as specified and directed.

S & F in repair 12 mm thick particle board, medium density, flat pressed, single layer or three layers type with BWR type adhesive and fixed with screws to timber frame works as in cupboard, shutters, partitions, shelves and similar work with teak wood beading at the edges complete all as specified and directed.

M&L 8-10 mm thick double charged premium quality vitrified ceramic tiles light shade (square / rectangular) polished, area of each tiles n. exc. 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed bed in CM 1:6 including Dismantlingcomplete all as specified and directed.

M&L 8-10 mm thick double charged premium quality vitrified ceramic tiles light shade (square / rectangular) polished, area of each tiles n. exc. 0.36 sqm in vertical surfaces in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick backing in CM 1:3 including Dismantlingcomplete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:6, including Dismantlingcomplete all as specified and directed.

M & L for Glazed ceramic coloured tiles of size 350 mm X 250 mm X 7 mm thick or 450mm X 350mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including cement screed bed of 10 mm thick 1:3 cm including Dismantling complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or stone masonry or on one side of lathing surfaces and finishing the surface even and smooth without using extra cement including Taking down complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M&L 5 mm thick rendering in CM 1:3 on fair faces of brick work or concrete surfaces as in ceiling, chajja, soffits etc, and finished even and smooth without using extra cement including Taking down complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement including Taking down complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of exterior weather coat paint over a coat of primer complete all as specified and directed.

M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed.

M&L preparation of new plastered wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L preparation of new plastered wall surfaces and including applying two coats of exterior weather coat paint over a coat of primer complete all as specified and directed.

M & L for two or more coats of French polish as required over a coat of wood filler on surfaces of any description, width or girth including cleaning and preparing the New surface complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames glazed with oil putty or fixed with beads including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete all as specified and directed.

S & F of 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.

S & F of 3 mm thick frosted on one side plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.

S & F of 4 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square exc. 0.5 Sqm in each pane complete all as specified and directed.

S&F 4.8 mm thick tinted glass and glazing with oil putty / wooden beads in square exc 0.50 sqm in each pane complete all as specified and directed.

S&F 4.8 mm thick tinted glass and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed.

M&L preparation of old painted wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and including applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and including applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of new or previously un-treated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Decorative type CP double brackets support for holding curtain rods and corner to be fixed to ends of curtain rod including rings fixing with screws complete.

S & F of mild steel chromium plated Harrison rails, with fixing brackets, stops, rollers etc. complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position complete all as specified and directed.

Dismantling of timber fillet, rails, post, rafters, purlins, etc. under 40 Sqcm in section Unframed work complete all as specified and directed.

S D CONSTRUCTION CO

M/s TALCO

D K SARKAR

GEETA CONSTRUCTION

MS UNITY CONSTRUCTION CO

DEBABROTA ROY CHOWDHURY