ADDITION / ALTERATION TO SMQ (PHASE-II) (PROVISION OF STORE SHED AT BSO YARD) AT AFS HAKIMPET AND PROVISION OF STORE SHED NEAR P-149 AT AFS BEGUMPET UNDER GE (AF) HAKIMPET

Amount

SCHEDULE 'A' PART -I (B/R PORTION) :- M&L for Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard / dense soil complete all as specified and as directed.

M& L for Plain Cement concrete 1:4:8 Type D-2 mix (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for RCC M-25 (using 20 mm graded stone aggregate) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC M-25 (using 20 mm graded stone aggregate) as in columns, Pillers, piers, posts and struts complete all as specified and as directed.

M&L for RCC M-25 (using 20 mm graded stone aggregate) as in beams,cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L Reinforced Cement concrete Nominal Mix, Type B-1 1:2:4 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter including fairfinished surfaces complete all as specified and as directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

M&L for Mild steel TMT bars 10 mm dia and over cut to length bent to shape required including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia all as specified and directed.

M&L for Mild steel TMT bars 6 mm to 8 mm dia cut to length bent to shape required including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

M&F for mild Steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes Fe 410-W (Gde-E-250 quality-A) conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

M&L for MS Plate (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but not exc 10 cm long complete all as specified and as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Surface excavation not exc 30 cm deep and avering 15 cm deep and getting out any type of soil complete all as specified and as directed.

M&L for PCC (1:4:8) type D- 2 mix (using 40 mm graded stone aggregate) of 75 mm thick as in Sub-floors, Sub-Bases, Floors, plinth protection and Pavings, etc., complete all as specified and as directed.

M&L for Cement concrete 1:2:4 type B-1 mix (using 20 mm graded stone aggregate) of 50 mm thick as in floor finishes etc complete all as specified and as directed.

M&L for Forming 12 mm thick 100 mm deep Expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and as directed.

M&L for Brickwork with fly ash bricks straight or curved onplan exc 6 m mean radius in CM1:6 complete all as specified and as directed.

M & L for Rendering 10 mm thick on fair faces of brick work or concrete wall surfaces in CM 1:4 and rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 to brick masonry surfaces and rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls alapplying two coats of dry distempering over a coat of primer complete all as specified and as directed.

M&L for applying two coats of cement based paint paint on walls including reparation of new plastered surfaces over a coat of primer complete all as specified and as directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M& L for 100 mm thick Plain Cement concrete 1:2:4 Type B- 2 mix (using 40 mm graded stone aggregate) as in sub base flooring complete all as specified and as directed.

M&L 40 mm thick plain Cement concrete 1;2:4 type B-1, mix (using 20 mm graded stone aggregate) as in floor finish concrete complete all as specified and as directed.

M&L for Forming Contraction (Dummy) joints 40 mm deep x 10 mm wide, filled with sealing compound Grade 'A' complete all as specified and as directed.

S&F Self supported roofing pre-painted polyster colour coated aluminum Galvalume corrugated steel sheet 1.0mm thick as in trussless roof covering sheet comes in cold roll coils of width 0.914m, length varying form 400 to 500 m, each roll weighing approx 3.5 tones with thickness varying from 15-20 microns including necessary fittings / fixtures and sealing the joints all as per manufacturer instructions complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated soil not exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for Mild steel work for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, 110 mm dia as rain water take down pipes complete all as specified and as directed.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

S&F Fe 410 -W (Gde- E- 250) quality- A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed

S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment fixing with riveted, bolted or welded attachment complete all as specified and as directed

S&F Mild steel sliding door bolts 375 mm, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

M&L preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamil paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and as directed .

SCHEDULE 'A' PART -II (E/M PORTION) :- M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC conduit / casing and capping of adequate size fixed on surface with PVC rawl plugs with sunken type pressed steel terminal box/PVC boxes and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes/PVC boxes of any shape and size modular white colour cover plate with frame

One lightr point controlled by one,one way switch.

One Ceiling fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp point on the (same board) with other switches.

One 3 pin socket outlet 5 amp point on the independent board

Description all as per item No. 31 here-in-before but with 4 sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board complete all as specified and as directed.

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and as directed.

Supply and fix switch piano flush type 6 Amp, one way complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1 3 pin 6 amps flush type universal complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1,3 pin 6 and 16 Amps flush type universal complete all as specified and as directed.

Supply and fix stepped type electronic ceiling fan regulator complete all as specified and as directed.

Supply and Fix Wall Mounted Box Type LED Batten suitable for 18/20 Watt with LED Lamp along with integrated driver complete with 2 Nos round block with necessary arrangements and connecting to the point wiring with necessary flexible copper conductor of multistranded three core 1.5 sqmm of suitable length from fitting to the ceiling rose complete all as specified and as directed.

S & F sheet metal enclosure powder painted vertical type MCB DB TPN 04 way double door including MCCB 63 Amps IP-42 protection and busbar 200 Amps with Din rail and busbar complete all as specified and as directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and as directed.

M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 6 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up complete all as specified and as directed. Note : - 2 runs of cable and one run of earth wire and conduit /Casing & Caping will be measured as one length.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm X 600 mm X 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified and as directed. NOTE :- Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

Supply and fix Earth continuty conductor or main earthing lead fixed to wall on batten or recess or chasses in ground or drawn in conduit/pipe or fixed to pole or any other indicated situationfor loop earthing etc as reuired 4 mm dia galvanised iron complete all as specified and as directed.

Supply and lay on wall / in ground /on pole ISI marked LT XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 35 sqmm 3.5 core complete all as specified and directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc for laying of cables, erection of poles, struts/ stays etc not exceeding 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed.

M & L for spreading cleaned dry river sand filling in trenches for cushioning of LT/HT cables punning after filling complete as specified and as directed. Note :- Punned thickness shall only be measured and paid

Supply and lay sub class B bricks old size laid flat adjacent to each other perpendicular to cable with width equal to length in trenches for protection of under ground cables complete all as specified and as directed

Supply and lay pipe galvanized, "Light grade", including fittings 40 mm dia complete all as specified and as directed

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable no of nuts, bolts and clamps complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

KOGANTI CONSTRUCTION COMPANY