CWE/CHM-23/2024-25 COMPREHENSIVE MAINT AND REPAIR TO CHAJJA RCC FINS/FECIA INCL EXTERNAL PLASTER IN MD ACCN UNDER AGE B/R II AT CHANDIMANDIR MIL STN

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and as directed by Engineer-in-charge.

Material and labour for brick work with sub class ‘B’ bricks of old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge.

All as per serial item No 2 here-in-before but except bricks (using old serviceable bricks obtained from ser item No 1 here-in-above) complete all as specified and as directed by Engineer-in-charge.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by Engineer-in-charge.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:6 surface finished even and smooth without using extra cement at any height on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc including removing all debrish from defence land arrangement complete all as specified and as directed by Engineer-in-charge.

M & L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 surface finished even and smooth without using extra cement up to a height of 6.0 mtr all as specified and directed. including taking down cement plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc including removing all debrish from defence land complete all as specified and as directed by Engineer-in-charge.

M & L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 surface finished even and smooth without using extra cement to a height from 06.0 mtr to 12.0mtr all as specified and directed. including Taking down cement plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc including removing all debrish from defence land complete all as specified and as directed by Engineer-in-charge.

Note for Item No. 5.00 to 7.00:- Necessary scaffolding, safety precaution and other arrangement shall be deemed to be included into quoted rate.

M&L for 10 mm thick rendering in Cement and Sand mortar 1:3 over brick work or concrete surfaces finished even and smooth without using extra cement, as in ceiling, chajjas, facias, at any position, complete all as specified and as directed by Engineer-in-charge.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including one coat of primer on the surfaces, complete all as specified and as directed by Engineer-in-charge.

Material & Labour for applying Two or more coats on new plasteredsurfaces of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed by Engineer-in-charge.

M&L for two coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and as directed by Engineer-in-charge.

M&L for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortar surfaces of RCC columns, beams, walls, chajjas etc and exposing the reinforced cement, wire brushing and cleaning the exposed steel reinforced bar, apply rust remover over the cleaned re-bar surface, wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement to strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified cement and quartz sand mortar in CM 1:3 mix, 40 mm average thick in two coats, with and including polymer @10% by weight of cement, including erecting and dismantling steel scafolding for carrying out the work upto height of 12.0mtr (Appx) complete all as specified and as directed by Engineer-in-charge.

Note:- Necessary scaffolding, safety precaution and other arrangement shall be the responsibility of the contractor. Quoted Rate shall be deemed to include this aspect.

S&F Welded steel wire fabric cut to length. Fixed to steel members/ reinforecement steel, weight per Sqm n exc 4 Kg complete all as specified and as directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-charge.

M&L for Glazed ceramic coloured tiles in vertical surfaces of size 350mm x 250mm x 7mm /450mm x 350mm x7mm thick set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:4 for receiving the tiles including dismantling old tiles and removal of debries complete all as specified and as directed by Engineer-in-charge.

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, area of each tile exc 0.11 Sqm but n. exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick cement mortar (1:6) screed bed for floor finishes including dismantling old tiles and removal of debries complete all as specified and as directed by Engineer-in-charge.

M&L Non Skid ceramic coloured tiles 7mm to 8mm thick, area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick cement mortar (1:6) screed bed for floor finishes including dismantling old tiles and removal of debries complete all as specified and as directed by Engineer-in-charge.

M&L for 3mm thick 7-9.5 mm width PVC beading/ edge profile to protect tile external corners, covers rough and sharp edges, enhance tile appearance at seamless glossy finish complete all as specified and as directed by Engineer-in-charge.

M&L for dismantling of wall and ceiling board (timber, pulp execution etc) any thickness including removing the waste from site complete all as specified and as directed by Engineer-in-charge.

S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M&L for 6 mm thick, 18-19 mm wide wooden lipping on prelaminated board fixed with nails/ screws to particle board/ timber frame work complete all as specified and as directed by Engineer-in-charge.

S&F magnetic cathcher for kitchen cabinet/ cupboard fixed as complete all as specified and as directed by Engineer-in-charge.

S&F factory made 18mm thick solid WPC (wood polymer composite) board of density 650 kg/cum of one side pre-laminated/ rigid lam with any colour and other side balancing lamination, as in cupboards/ kitchen/ cabinet shutter/ drawers etc fixed with screws, sovent cement, adhesive complete all as specified and as directed by Engineer-in-charge.

Material & labour for solid WPC (wood polymer composite) board 25 mm thick, interior grade, pre laminated one side, fixed with screws as in shutters of cup boards and kitchen cabinets, complete all as specified and as directed by Engineer-in-charge.

S&F of continous piano hinges, mild steel bright finish width of flap 40mm, fixed complete all as specified and as directed by Engineer-in-charge.

Taking down chowkhats n.exc 1.5 sqm each without taking off shutter and removing from site complete all as specified and as directed by Engineer-in-charge.

Taking down chowkhat exc 1.5 sqm each but not exc 4.00 sqm without taking off shutter and removing from site complete all as specified and as directed by Engineer-in-charge.

Taking down shutter exc 1 sqm but n.exc 2 sqm each & removing from site complete all as specified and as directed by Engineer-in-charge.

Resecuring or easing & adjusting Same opening Shutters of any description exc 1 sqm and n exc 2 sqm complete all as specified and as directed by Engineer-in-charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm and 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and as directed by Engineer-in-charge.

S&F of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed by Engineer-in-charge.

S&F of 125mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including filling of cement concrete 1:3:6, type C1 in frame complete all as specified and as directed by Engineer-in-charge.

S&F of 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing of 35mm thick, 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-charge.

Supply and fixing of 200 mm aluminium anodized barrel tower bolt (ISI Marked) of extruded section fixed complete all as specified and as directed by Engineer-in-charge.

Supply and fixing 100mm aluminium anodized barrel tower bolt (ISI Marked) of extruded section fixed complete all as specified and as directed by Engineer-in-charge.

Supply and fixing aluminum alloy, anodized, sliding door bolt (ISI Marked) 250mm long hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy, complete all as specified and as directed by Engineer-in-charge.

S&F of 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin complete all as specified and as directed by Engineer-in-charge.

S&F of 150mm size aluminum handle (ISI Marked) extruded type anodized, fixed complete all as specified and as directed by Engineer-in-charge.

S&F of 100mm size aluminum handle (ISI Marked) extruded type anodized, complete all as specified and as directed by Engineer-in-charge.

M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

Note:- (i) Thickness of powder coatings shall be not less than 50 micron. (ii) Weight of the aluminium sections only shall be measured and paid. (iii) Aluminium doors window/ ventilators to be fixed to jambs with cadmium plate screws. (iv) The rate shall be inclusive of neoprene beadings, handles, hinges, screws etc. weight of fittings/ fixtures will not be measured for ariving the weight of aluminium section. (v) Glass panes and panels shall be measured & paid separately under respective items. Design shall be approved from Engineer-in Charge as per existing at site before fabrication and bulk order to the manufacturer.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 4.80 mm thick ordinary quality, tinted glass, fixed to aluminum frame work in panels not exc 0.5 Sqm in each pane, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 5.00 mm thick ordinary quality, tinted glass, fixed to aluminum frame work in panels exc 0.5 Sqm in each pane, complete all as specified and directed by Engineer-in-charge.

Supply and fixing factory made steel windows (Box type) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer fixed including taking down old window and finished smooth and fair surface complete all as specified and directed by Engineer-in-charge.

Supply and fixing factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer fixed including taking down old window and finished smooth and fair surface complete all as specified and directed by Engineer-in-charge.

Supply and fixing steel ventilator, factory made, fixed type including hinges, steel peg stay, a shop coat of red oxide primer and finished smooth and fair surface including taking down old ventilator and finished smooth and fair surface complete all as specified and directed by Engineer-in-charge.

Supply and fixing 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-charge.

Supply and fixing 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-charge.

Supply and fixing 4mm thick tinted / frosted sheet glass area exc 0.5 Sqm fixed to aluminum/ MS frame work with standard anodized aluminum bead, rubber packing, aluminum screws etc, in panels of any size in each pane, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm including fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-charge.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-charge.

Supply and fixing 150 mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, fixed as in repair complete all as specified and directed by Engineer-in-charge.

M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and directed by Engineer-in-charge.

S&F in repair 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-charge.

S&F in repair Pillar tap, 15mm dia cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 15 mm bore tubes “medium grade”, galvanized, with and including all fittings and fixed to walls and ceilings or laid in floors including taking up or down steel tubing, 15mm bore, with all fittings complete all as specified and directed by Engineer-in-charge.

Supply and fixing 20mm bore tubes “medium grade”, galvanized, with and including all fittings and fixed to walls and ceilings or laid in floors including taking up or down steel tubing 20 mm bore, with all fittings complete all as specified and directed by Engineer-in-charge.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of inserting sheets, landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth complete all as specified and directed by Engineer-in-charge.

Supply and fixing vitreous china, wash down water closet pan, white, Pedestal pattern WC with ‘P’ or ‘S’ trap, with all fittings and connection, fixed as in repair complete all as specified and directed by Engineer-in-charge.

Supply and fixing vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement as in repair complete all as specified and directed by Engineer-in-charge.

Supply and fixing PVC valveless, syphonic action type flushing cistern, low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC bend for squat/ pedastal pattern etc, fixed as in repair complete all as specified and directed by Engineer-in-charge.

Supply and fixing plastic water closet seat cover, white closed pattern with flat bottom with mild steel chromium plated or aluminium hinging device, fixed as in repair complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed by Engineer-in-charge.

S&F chromium plated Jet for EWC for 15mm bore with fittings, fixed as in repair complete all as specified and directed by Engineer-in-charge.

Supply and fixing wall Mixer, for mixing hot & cold water screwed down for iron pipe and fixed, suitable for 15 mm bore pipe, fixed as in repair, complete all as specified and directed by Engineer-in-charge.

Supply and fixing vitreous china wash hand basin, white, flat back, size 550 x 400mm including brackets of suitable size, as in repair complete all as specified and directed by Engineer-in-charge.

Material and labour for bathroom cabinet of size 600mm x 450mm fixed to wall with rawl plugs having arrangements to put inside toiletries, fixed as in repairs complete all as specified and directed by Engineer-in-charge.

S&F in repair of 25mm dia Curtain rails, mild steel chromium with fixing brackets, stops, end rollers etc. for curtain rod including taking down defective bracket complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair towel rail 600 mm long of PTMT, chromium plated fixed with and including chromium plated screws and wooden / plastic cleats (minimum weight 190 gms), complete all as specified and directed by Engineer-in-charge.

S&F in repair of brass chromium plated shower rose, 125 mm size with long swivel plush CP arm complete all as specified and directed by Engineer-in-charge.

S&F in repair of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer-in-charge.

S&F as in repair 15mm bore angle valves, cast copper alloy, fancy type, chromium plated, screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions complete all as specified and directed by Engineer-in-charge.

S&F of 15mm bore Bib taps, cast copper alloy, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair complete all as specified and directed by Engineer-in-charge.

Material and labour for framed work such as grills, grating, framed guard bars, walk ways, railings etc. using steel conforming to Fe-290 fixed as in repair complete all as specified and directed by Engineer-in-charge.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ floor including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning complete all as specified and directed by Engineer-in-charge.

S&F in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed by Engineer-in-charge.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ floor including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning complete all as specified and directed by Engineer-in-charge.

S&F in repair 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed by Engineer-in-charge.

Demolition of stone slabs of any description in floors laid, bedded and pointed in any mortar complete all as specified and directed by Engineer-in-charge.

Material and labour 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and laid over 15 mm thick screed in CM 1:6 complete all as specified and directed by Engineer-in-charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engineer-in-charge.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 15 mm thick screed in CM 1:6 complete all as specified and directed by Engineer-in-charge.

M&L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over 15 mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engineer-in-charge.

Supply and fix 500 litres capacity rotational moulded polyethylene water storage tanks white in colour (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, with and including new tank nipple & ball valve 20mm PTMT, including dismantling of existing water tank and removing from site all as specified in SSR Part-I and all as directed by Enginer-in-charge.

Supply and fix 1000 litres capacity rotational moulded polyethylene water storage tanks white in colour (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, with and including new tank nipple & ball valve 20mm PTMT, including dismantling of existing water tank and removing from site all as specified in SSR Part-I and all as directed by Enginer-in-charge.

M&L for Cleaning and removing all scale and dirt, etc. from tanks of capacity exc. 250 Litres and n. exc. 500 litres placed at any height and from mouths of circulating pipes, etc complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC connections, 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engineer-in-charge.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and as directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-charge.

S&F rolled sections as in main and cross beams, coloumns, hip and jack rafters; purlins where connected to common rafters of angle, pipe sections etc complete all as specified and as directed by Engineer-in-charge.

Demolition of cement concrete (unreinforced) of any description and in any position (below or above GL at any height) not otherwise specifically provide for complete all as specified and as directed by Engineer-in-charge.

M&L for cement concrete 1:2:4 Type B1 (using 20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water trought and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed by Engineer-in-charge.

M&L for 75mm thick Cement concrete type C2, (1:3:6) (using 40mm graded aggregate) as in Plinth protection finished the concrete surface even and smooth without using extra cement completecomplete all as specified and as directed by Engineer-in-charge.

Supply and fix factory made rubber moulded machine pressed coloured chequered cement concrete tiles 250mm x 250mm x 22-25mm thick (with grey cement and no pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, glossy finish, laid over and including 20mm thick screed bed in cement mortar 1:6, over Cement concrete 1:4:8, type D2 (40mm graded stone aggregate) for 75mm thick floor as in sub base for tiles complete all as specified and as directed by Engineer-in-charge.

Supply and fix concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 40mm thick sand cushioning, over Cement concrete 1:4:8, type D2 (40mm graded stone aggregate) for 75mm thick floor as in sub base for tiles complete all as specified and as directed by Engineer-in-charge.

M&L for 40mm thick PCC (1:2:4) type B-1 using 20mm garded stone agg as in flooring, finished concrete surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

S&F Second Class hard wood plain, solid, straight as in chowkat and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engineer-in-charge.

aggarwal traders

Gunjan and Gunjan Associates