Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.4 LAccepted-AOC 21 167 KAKANI NAGAR 2ND LANE NAD POST VISAKHAPATNAM 530009 | VISAKHAPATANAM | ANDHRA PRADESH | 530009 | L1 | Accepted-AOC L1 | |
| 2 | L2₹29.9 L+₹3.5 L (13.4%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹32.5 L+₹6.1 L (23.0%)Rejected-AOC DOOR NO 43 2 BESIDES VIZAG DEFENCE ACADEMY 104 AREA KAPPARADA VISAKHAPATNAM 530013 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 530013 | L3 | Rejected-AOC L3 | |
| 4 | L4₹34.8 L+₹8.3 L (31.6%)Rejected-AOC NO 133 RASHTRAPATHI ROAD SECUNDERABAD 500 003 | SECUNDERABAD | HYDERABAD | TELANGANA | 500003 | L4 | Rejected-AOC L4 |
| Sl No | Description | Qty | Unit | Mavee Syndicate L3 | THE DECAN ENGINEERING AND REFRIGERATION COMPANY L4 | SRI SAI RAM ENTERPRISES L2 | SVG SUPPLIES L1 |
|---|---|---|---|---|---|---|---|
| 1.00Note : 1. Contractor need to purchase minimum 50% of all items mentioned in this CA within 20 days of getting sample approval and kept in custody so that no delay in work due to non-availability of materials will be faced. Contractor should ensure during the cause of work that he has minimum 25% of materials with him till the completion of item/date. 2. Contractor should buy the exact items which are given with catalogue reference. Other makes will be approved only by submitting non availability Certificate Company. Contractor need to remove all the dismantled items without delay. 3. Rate quoted for demolition/dismantling /taking down is inclusive of removing the same from site and dumping at given locations anywhere inside station. 4. Contractor will make his own arrangement to store his items. 5. Some places in this contract where the vehicle will not reach the spot directly, the material will be moved manually in these places. The rate quoted will be considered all inclusive on this account. 6. All trade skilled labour required in this contract shall be present daily in working hours, irrespective of complaints received. 7. Complaint for a similar items may be in scattered / different area, quoted rate will be considered all inclusive on this account. | |||||||
| 1.01 | S & F in replacement 4ft 20W LED batten tubelight surface/wall mounted with powder coated Aluminium housing, high optically efficient polycarbonate diffuser, inbuilt electronic driver duly wired upto terminal block, luminous efficiency > 100 lm/watt, surge protection upto 4kV, 440V High voltage protection, power factor > 0.95, CRI > 80 all as specified and directed by the Engineer-in-charge.
Model: Wipro Garnet/ Crompton Linea Pro/ Havells Endura Linear Pro / similar | 400 | EACH | 250 ₹1,00,000 Lowest | 370 ₹1,48,000 | 300 ₹1,20,000 | 400 ₹1,60,000 |
| 2.00 | Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 240 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete, all as specified and directed by the Engineer-in-charge | 50 | EACH | 140 ₹7,000 Lowest | 275 ₹13,750 | 275 ₹13,750 | 150 ₹7,500 |
| 3.00 | S&F in replacement LED light fitting in replacement of 10 watt bulk head luminaries complete with all accessories and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-charge | 20 | Each | 1,040 ₹20,800 | 650 ₹13,000 | 300 ₹6,000 Lowest | 450 ₹9,000 |
| 4.00 | Supply and fixing in replacement round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers as per sample, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-charge. Model: Philips Ultra Slim Plus/ Havells Integra NXT/ Wipro garnet/Similar | 10 | Each | 680 ₹6,800 Lowest | 900 ₹9,000 | 700 ₹7,000 | 900 ₹9,000 |
| 5.00 | Supply and fixing in replacement round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers as per sample, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-charge.
Model: Philips Ultra Slim Plus/ Havells Integra NXT/ Wipro garnet/Similar | 10 | Each | 790 ₹7,900 Lowest | 900 ₹9,000 | 800 ₹8,000 | 1,000 ₹10,000 |
| 6.00 | Supply and fixing in replacement Deep recessed downlights, 18Watt, aluminium construction EMC/EMI compliant, Ripple<5% flicker free driver, as per sample provided including connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light to roof surface all as specified and as directed by the Engineer-in-charge.
Model: Philips Ultra Slim Plus/ Havells Vibe G2/ Wipro garnet/Similar | 10 | Each | 1,280 ₹12,800 | 1,250 ₹12,500 Lowest | 1,400 ₹14,000 | 1,400 ₹14,000 |
| 7.00 | Supply and fixing in replacement round shape 20 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers,as per sample provided, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-charge. Model: Wipro garnet/ Crompton Star Lord/ Similar | 5 | Each | 750 ₹3,750 Lowest | 1,500 ₹7,500 | 1,500 ₹7,500 | 1,150 ₹5,750 |
| 8.00 | Supply and fixing in replacement round shape 24 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,as per sample provided, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-charge.
Model: Havells Integra NXT/ Jaquar areva prime/Similar | 5 | Each | 870 ₹4,350 Lowest | 1,500 ₹7,500 | 1,700 ₹8,500 | 1,250 ₹6,250 |
| 9.00 | Supply and fixing in replacement surface downlights, 18Watt, aluminium housing with heat sink as per sample provided including connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light to roof surface all as specified and directed.
Model: Havells Integra NXT | 5 | Each | 990 ₹4,950 Lowest | 1,500 ₹7,500 | 1,400 ₹7,000 | 1,500 ₹7,500 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
7 Jan 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Hakimpet
Secunderabad
REPAIR AND REPLACEMENT OF INTERNAL FITTING AND FIXTURES AT AFS HAKIMPET UNDER GE (AF) HAKIMPET
2025_MES_744951_1
8888/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
Hakimpet
As per NIT
9 documents required · 9 mandatory
₹500
GE (AF) Hakimpet
₹80,000
Yes
16 Mar 2026
17 Dec 2025
9 Jan 2026
17 Dec 2025
7 Jan 2026
31 Dec 2025
Supply and fix MCB distribution board single door type SPN 12 way sheet steel powder coated with bus bar ,neutral link & earth bar etc.with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing circuit complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 240 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete, all as specified and directed by the Engineer-in-charge
S&F in replacement LED light fitting in replacement of 10 watt bulk head luminaries complete with all accessories and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-charge
S & F in replacement 4ft 20W LED batten tubelight surface/wall mounted with powder coated Aluminium housing, high optically efficient polycarbonate diffuser, inbuilt electronic driver duly wired upto terminal block, luminous efficiency > 100 lm/watt, surge protection upto 4kV, 440V High voltage protection, power factor > 0.95, CRI > 80 all as specified and directed by the Engineer-in-charge. Model: Wipro Garnet/ Crompton Linea Pro/ Havells Endura Linear Pro / similar
Supply and fixing in replacement round shape 20 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers,as per sample provided, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-charge. Model: Wipro garnet/ Crompton Star Lord/ Similar
S & F in replacement of louvers with suitable frame work and fixing arrangements for exhaust fan of any size sweep complete including removing the existing unserviceable one all as specified and directed by the Engineer-in-Charge.
Supply and laying PVC wire trunking, self-extinguishing type 100x50 mm, sheet thickness minimum 4mm including coupler plates, elbows, tees, reducers, bolts, nuts, washers and other accessories conforming to NEMA/ASTM/BIS standards complete all as specified and directed by the Engineer in charge
Supply and laying PVC wire trunking, self-extinguishing type 150x50 mm, sheet thickness minimum 4mm including coupler plates, elbows, tees, reducers, bolts, nuts, washers and other accessories conforming to NEMA/ASTM/BIS standards complete all as specified and directed by the Engineer in charge
Supply and laying PVC wire trunking, self-extinguishing type 100x100 mm, sheet thickness minimum 4mm including coupler plates, elbows, tees, reducers, bolts, nuts, washers and other accessories conforming to NEMA/ASTM/BIS standards complete all as specified and directed by the Engineer in charge
Supply and fixing of ceiling fan white canopy/fan cover suitable for all fan types, plastic, downrod mount complete all as specified and directed by the Engineer-in-charge
a) LED driver suitable for 2x2 LED Panel of any company from 36 watt to 42 watt Make Havells/Philips/CG
b) LED driver suitable for LED Lights of any company from 60 watt to 100 watt Make Havells/Philips/CG
Supply and fixing of surface ceiling light 24watt,dimensions 250mm x 65mm x 250mm ( L x H x W) complete all as specified and directed by the Engineer-in-charge. Model No. Philips Saturn / Crompton star stylus/ similar
S&F modular metal flush box 3 module complete including any civil work required to make good the disturbed surface all as specified and directed by Engr-in-charge.
S&F modular metal flush box 12 module complete including any civil work required to make good the disturbed surface all as specified and directed by Engr-in-charge.
S&F in replacement of switch piano flush type, single pole one way 6 Amps 240 volts ISI marked complete all as specified and as directed.
S&F in replacement of bell push,flush type, 6 Amps ,240 Volts ISI marked complete.
S&F in replacement of switch socket combination 2 in 1, 3 pin 6 Amps, flush type, universal ,240 volts complete all as specified and as directed
M & L in replacement of switch socket combination 2 in 1, 3 pin , 6 Amps/16 Amps, flush type,universal,240 volts complete all as specified and as directed
M & L in replacement of Call bell, ding dong, AC 240 Volts complete all as specified and as directed
S&F in replacement of stepped type electronic fan regulator 100 Watt, 240 Volt, 50 Hz 2 module size in 5 steps flush type complete all as specified and directed.
S&F in replacement of stepped type electronic fan regulator 100 Watt, 240 Volt, 50 Hz single module size in 5 steps flush type complete all as specified and directed.
S&F of PCB controlller for BLDC ceiling fan of any type & make, stator with winding and shaft complete all as specified and directed. Note: Make shall be same as the make of fan under repair
S&F in replacement of switch Modular type single pole one way 6 Amps 240 volts complete all as specified and as directed.
S&F in replacement of bell push,modular type, 6 Amps ,240 Volts ISI marked complete.
S&F in replacement of stepped type electronic fan regulator 100 Watt, 240 Volt, 50 Hz 2 module size in 5 steps modular type complete all as specified and directed.
S & F in replacement of batten/angle holder, PVC/Polycarbonate type with back plate, 240 V , 50 Hz suitable for batten fittings complete all as specified and directed.
S&F in replacement of ceiling rose 6 A, 3 plate,PVC/polycarbonate ,insulated body 240 Volt , 50 Hz all as specified and as directed.
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, lamp holders, light fittings etc removing materials and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface as per site requirement complete all as specified and directed by Engr-in-Charge.
Taking down existing unserviceable MCCB/main switch (any type and capacity) and making good the disturbed surface of walls including paint touchup to match with the existing surfaces complete all as specified and as directed by the Engineer in charge.
Taking down existing unserviceable distribution board with MCBs, switch fuse unit, enclosure and making good the disturbed surface of walls including paint touchup to match with the existing surfaces complete all as specified and as directed by the Engineer in charge.
Taking down Existing old unserviceable submain wiring of any description /type size and removal of UNSV material from site and making good the disturbed surface of walls / ceiling so as to match with the existing finishes all as specified and as directed by the Engineer -in- charge .
a) One light point controlled by one, 1 way switch
b) One 3 pin 6 Amps socket point controlled by one switch on same board
c) One 3 pin 6 Amps socket point controlled by one switch on independent board
d) One ceiling fan/exhaust fan point controlled by one 1way switch
e) One bell point controlled by one switch
f) One light point controlled by two, 2 way switches
All as per item No. 60 here-in-before but with 4 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.
a) One light point controlled by one, 1 way switch
b) One 3 pin 6 Amps socket point controlled by one switch on same board
c) One 3 pin 6 Amps socket point controlled by one switch on independent board
d) One ceiling fan/exhaust fan point controlled by one 1way switch
e) One bell point controlled by one switch
f) One light point controlled by two, 2 way switches
a) One light point controlled by one switch
b) One 3 pin 6 Amps socket point controlled by one switch on same board
c) One 3 pin 6 Amps socket point controlled by one switch on independent board
d) One ceiling fan point controlled by one switch and regulator
M&L for submain wiring along with earth wire with 3 x 4.0 Sqmm FRLSH insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through existing recessed/surface steel/PVC Conduit/ casing capping in wall/roof surfaces complete all as specified and directed by Engineer-in-Charge. Note: Three runs of 4.0 Sqmm copper cable shall be measured as one unit length.
All as per item No.69 here-in-before but with 3 x 6.0 sqmm FRLSH PVC insulated copper conductor cable complete all as specified and directed by Engineer-in-Charge. Note: Three runs of 6.0 Sqmm copper cable shall be measured as one unit length.
All as per item No. 71 here-in-before but with 3 x 6.0 sqmm FRLSH PVC insulated copper conductor cable concealed complete all as specified and directed by Engineer-in-Charge. Note: Three runs of 6.0 Sqmm copper cable and one run of PVC conduit shall be measured as one unit length.
M&L for submain wiring alongwith earth wire with 3 x 6.0 Sqmm FRLSH PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including MMS PVC Conduit/casing capping on surface and its all accessories of suitable size on wall/roof surfaces complete all as specified and directed by Engineer-in-Charge. Note: Three runs of 6.0 Sqmm copper cable and one run of PVC conduit shall be measured as one unit length.
M&L for submain wiring alongwith earth wire with 3 x 10.0 Sqmm FRLSH PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including MMS PVC Conduit/casing capping on surface and its all accessories of suitable size on wall/roof surfaces complete all as specified and directed by Engineer-in-Charge. Note: Three runs of 10.0 Sqmm copper cable and one run of PVC conduit shall be measured as one unit length.
All as per item No. 23 here-in-before but with 8 Module complete
All as per item No. 23 here-in-before but with 6 Module complete
All as per item No. 23 here-in-before but with 12 Module complete
Supply and fixing/laying 2 core 2.5sqmm copper flexible cable, PVC insulated and sheathed,
Supply and laying 3 core 2.5sqmm copper flexible cable, PVC insulated and sheathed, on wall, roof, ground, pole or passing through nallah, under road including fixing to any surface with proper plugging arrangement or in ground/wall complete all as specified and directed by the Engineer in charge
Supply and laying 3 core 4sqmm copper flexible cable, PVC insulated and sheathed, on wall, roof, ground, pole or passing through nallah, under road including fixing to any surface with proper plugging arrangement or in ground/wall complete all as specified and directed by the Engineer in charge
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty 2 core cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq. mm nominal cross section in service connections complete all as specified and directed by the Engineer in charge
Supply and fixing of electrical flexible conduit 25mm dia, dark grey/white, corrugated , including removing the existing electrical connection on either side of DBs/Switchboards/fixtures/fittings and reconnecting after running the electrical connecting wires in the conduit complete, all as specified and directed by Engineer-in-charge
Each Set
Each Job
Supply and fix in replacement distribution board double door type VTPN 4 way sheet steel powder coated with bus bar ,neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and directed by Engineer-in-Charge.
Supply, Install, testing & commissioning factory made CPRI approved Cubical thermoplastic polycarbonate LT panel shock, rust, dust, impact and water proof, halogen and silicon free, UV resistant with internally embedded high grade gasket made of polyurethane, IP-65 , panel of suitable size fully wired up, ready to connect load and control lines comprising the folowing complete all as specified and directed by the Engineer-in-charge:-
Supply and fix in replacement MCB, SPN, 40-63 Amps, 240 Volts
Supply and fixing in replacement MCCB 125 Amp three pole 415 Volt , breaking capacity 16 KA, with fixed thermal & magnetic setting complete all as specified and as directed by the Engineer in charge.
l/roof surfaces complete all as specified and directed by Engineer-in-Charge. Note: Five runs of 4.0 Sqmm copper cable and one run of PVC conduit shall be measured as one unit length.
M&L for submain wiring alongwith earth wire with 5 x 6.0 Sqmm FRLSH PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including MMS PVC Conduit/casing capping on surface and its all accessories of suitable size on wall/roof surfaces complete all as specified and directed by Engineer-in-Charge. Note: Five runs of 6.0 Sqmm copper cable and one run of PVC conduit shall be measured as one unit length.
Supply and fixing MCCB 25-100 Amp Three pole 415 Volt , breaking capacity, 16 KA, with fixed thermal & magnetic setting complete all as specified and as directed by the Engineer in charge.
(g) Capacitor 4 mfd capacity 240 volts . Make : CAPCO/TIBCON
Supply only the following parts in replacement of Ceiling/ Exhaust Fans of existing makes and size complete all as specified and as directed by the Engineer-in Chargre :-
(c) Gun metal bush
(d) Copper flexible cord 3 core of size 23/00076, 5m bundle
(e) Fan Clamp with rubber bush
(b) Ball bearing of suitable size. Make : NBC/SKF/TATA.
(f) Down rod, 400 mm long
(a) Capacitor 2.5 mfd capacity 240 volts. Make : CAPCO/TIBCON
S & F in replacement of motor for plastic exhaust fan of any size and type complete all as specified and directed by the Engineer-in-Charge.
Supply only the following parts in replacement of water heater (Electric Geyser) storage type of given make and size complete all as specified and as directed by the Engineer-in Chargre :-
(a) Thermostat ISI marked suitable for 25/50 litre capacity . Make -sphare hot /bajaj/ditz/picco/usha /racold .
(b) Heating element ISI marked 2000 watt push/thread type circular /triangular base suitable for any make and size. Make - bajaj / Racold
(c) Indicator bulb 240 V suitable for given make, type and model
S & F in replacement of PVC connection 15 mm dia 450 mm long with PTMT nuts on both sides for cold water connection.
S & F in replacement of PVC connection 15 mm dia 900 mm long with PTMT nuts on both sides for cold water connection.
S & F in replacement of PVC connection 15 mm dia 450 mm long with PTMT nuts on both sides for hot water connection.
S & F in replacement of PVC connection 15 mm dia 900 mm long with PTMT nuts on both sides for hot water connection.
M&L for submain wiring alongwith earth wire with 5 x 10.0 Sqmm FRLSH PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including MMS PVC Conduit/casing capping on surface and its all accessories of suitable size on wall/roof surfaces complete all as specified and directed by Engineer-in-Charge. Note: Five runs of 10.0 Sqmm copper cable and one run of PVC conduit shall be measured as one unit length.
Supply and fix in replacement distribution board double door type TPN 8 way sheet steel powder coated with bus bar ,neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and directed by Engineer-in-Charge.
(h) Ball bearing for exhaust fans of suitable size Make : NBC/SKF/TATA
Taking Down water heater (Electric Geyser) storage type of any make of 25 / 50 ltr capacity after disconnecting the existing electrical connection, water pipes and reassembling in all respects after replacing unserviceable parts/components and testing for proper working after repairs and refixing in the original place/position duly connecting up water supply and electric supply etc.complete all as specified and as directed by the Engineer-in-Charge. Note :- Spare parts replaced shall be measured and paid separately under relevent items below. However labour cost of replacement is deemed to be included in the rate quoted.
Supply only Geyser Capillary Thermostat and Cut Out, Capillary Thermostat Suitable for any Geyser 10 to 50 Liter, 230volts, copper and plastic material complete all as specified and directed by the Engineer-in-charge
Repairing/overhauling of TPN/SPN DBs of any size/type fixed on building wall incl cleaning with compressed air, tightening of all electric connection to the bus bar & switch gears , refixing of loosed doors with proper fixing & locking arrangement & necessary welding work as required and replacement of wornout/ burnt/rusted/ loose lugs , door lock, nut bolt,hing, washers,internal wiring with suitable size (minimum 1.5 sqmm) of PVC copper conductor wire ,repair to plaster work as require at site and including disconnection of all cable/ sub main from the bus bar and insulating the naked portion of Al/Cu conductor and re-connect the same after repair of panel and proper connection of main earth wire/lead with panel body using lugs complete all as specified and directed.
Supply and fixing concealed meter box with isolator made from minimum 0.7mm thick CRCA sheet, to accommodate 1No. Single phase energy meter complete all as specified and directed.
Supply and fixing concealed meter box with isolator made from minimum 0.7mm thick CRCA sheet, to accommodate 1No. Three phase energy meter complete all as specified and directed.
Supply and fix electric water heater, vertical storage type with ferroglass coated anti-rust inner container and heating element upto 2 KW capacity 25 litre, heavy duty anode rod, preset thermal cutout, BEE 5 Star rated as per latest BEE norms (i.e. standing losses ≤ 0.465 kWh/24 hour/45°C which is only valid till 31st Dec 2025, material shall be supplied as per latest revision at the time of supply, complete with all accessories such as safety valve, thermostat, NRV, connection piece(hot and cold water connection pipe) etc complete all as specified and directed by Engr-in-charge (as per latest authorization). Model: Havells Monza DX or similar in Bajaj/Orient
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories without remote, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated as per latest BEE norms in vogue at the time of supply with brushless direct current motor (BLDC) including depositing the unserviceable ceiling fan to MES E/M store complete all as specified and directed by Engineer-in-Charge.
S&F in replacement post top lanterns, 25W , IP65 long life aesthetically designed with symmetrical light distribution with high power LED , clear/opaque cover as per site requirement complete all as specified and directed.
Supply and fix in replacement Exhaust fan, steel body AC S
ingle phase 230 V of size 300 mm sweep with blades, and frame and louvers including taking down the existing unserviceable fan and depositing it to MES E/M Store complete all as specified and directed by Engr-in-charge
Supply and fix in replacement Exhaust fan, steel body AC Single phase 230 V of size 225 mm sweep with blades, and frame and louvers including taking down the existing unserviceable fan and depositing it to MES E/M Store complete all as specified and directed by Engr-in-charge
Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including taking down the existing unserviceable fan and depositing it to MES E/M Store complete all as specified and directed
Supply & fixing in replacement new generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting with high power LED 8 Watts as light source with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size and fixing arrangements such as grouting with suitable nuts bolts and washers in PCC base complete all as specified and directed by Engineer-in-Charge. Make:- Havells Model No BAMBOOBLS8WLED830PSYMTOPC or equivelent in Bajaj/ Crompton/ Philips.
Suppy only Insulation tape all as specified and directed by Engineer-in-charge
S&F in replacement 400mm swing wall fan, 4star, smooth oscillation, copper motor with remote control, 72 speeds, plastic body including taking down the existing unserviceable fan and depositing it to MES E/M Store complete all as specified and directed
Supply and fix in replacement 12W LED T bulbs, cool day white, energy efficient, no visible flickering, glare reduction technology complete all as specified and directed
Supply and fxing of Cable Zip Ties Heavy Duty Strong Wire Organizer, nylon material, 8inch dia , 20cm length complete all as specified and directed by the Engineer-in-charge
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
8888ps.pdf
Tender Documents • 0.59 MB
BOQ_834128.xls
BOQ • 0.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .