8266 PROVISION OF MEZZANINE FLOOR ABOVE ACCOMMODATION OFFICE WASHROOM WINDOW VENTILATORS ON GROUND MEZZANINE FLOOR AT INS ANGRE ADDITION ALTERATION AND REPAIRS TO BATHROOMS AND CABINS IN A16 MCPO CABINS AT INS ANGRE ADDITION ALTERATION AND SPECIAL RE

Amount

Taking down chowkats or frame with shutter (without taking off shutter from frame), n exc 1.5 sqm each complete all as specified and diected.

All as per item 1 above but exc 1.5 sqm but not exc 4 sqm each.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified and diected.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC , C" channel having a PVC sheet strip of 20 mm width stuck in side with salvent cement for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site complete all as specified and diected.

S&F 250 mm long aluminium alloy, anodisede, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and diected.

S&F powder coated aluminium frame/shutters for doors, windows, venti lators with one or more rebates including joining cleat for fixing, locking arrangement, rubber beadind, screws etc complete all as specified and diected.

S&F 12mm thick prelaminated medium density fibre board interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed.

S&F 5.5 mm thick, sheet glass, ordinary quality, in any size of pane complete all as specified and diected.

M&L for aluminium anodised Deco grill 7.5 mm thick DG-104, fixed to E/H frames, 1.5mm, in required sizes complete all as specified and diected.

S&F Stainless steel but hinges 100mm size complete all as specified and diected.

S&F 150 mm aluminium handle cast type anodised all as specified and directed.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

Taking down cement plaster on stone/brick wall including raking out joints hacking for key and scrubbing down with water etc. complete all as specified and diected.

M&L rendering 20 mm thick in CM (1:4) as on fair faces of brick work or concrete surfaces mixed with water proofing compound @ 3% by weight of cement complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as directed.

M&L for rendering 5mm thick in CM 1:3 on ceiling surface complete all as specified and as directed

M&L for epoxy base joint paint such as on external surfaces of walls to fill the cracks with and including resin and hardner in proportion as per manufacturers instructions complete all as specified and as directed (Make : Pidilite/Fosrac/ Chemistic/Dr Fixit).

M&L for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof complete all as specified and directed

M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 1 to 2 mm thick wall care putty and primer incl preparation of surfaces complete all l as specified and directed.

All as per item No 19 above as in ceiling

M&L preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment on wall surfaces and applying a coat of 1 to 2mm thick wall care putty (JK/Birla), to get the surfaces even and smooth finish and applying one coat of wall primer and finally applying two coats of oil emulsion distemper of approval tint all as specified and directed.

M&L preparation of old decorated surfaces of walls, soffits, roof facia and applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scafolding for high rise bldgs etc all as specified and directed.

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer comlete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tile to store and rubbish off the premises out side MD Land complete all as specified and diected.

M&L for 20-25mm thick, Kota stone slab, as in floors, with full rounding along exposed lengths laid over and including 20 mm thick bedding layer in CM 1:6, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. complete all as specified and diected.

All as per item 26 above but as in skirth/dado/risre with and including 10 mm thick in CM 1:4

M&L for PCC 1:2:4 type BI using 20 mm graded stone aggregate, mixed with WPC @ 3% by Sqm wt. of cement, as sub base, 40mm thick complete all as specified and diected.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. with and including 20 mm thik CM(1:6} bedding set and jointed in neat cement slury and pointd in coloured cement to match the shade of the tiles complete all as specified and diected.

M&L for (450mm x 300mm) coloured glazed ceramic tiles in vertical surface of any size with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles complete all as specified and diected.

M&L granite (of any type) stone 20mm thick machine cut, as skirting / dedo / floor etc. bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types incl scred bed or bedding layer or mortar 15mm layer or mortar for laying floor finishes complete all as specified and diected.

M&L for vitrified ceramic tiles 10 mm thick (square/rectangular) polished dark shade, area of each tiles not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed white or coloured cemjent to match the dark shade of the tiles with and including screed bed in CM 1:6 20mm thick all as specified and directed.

All as per Srl item No 32 herein before but on vertical surfaces such as skirting, dados and riser to with and incl 10 mm thick backing coat in CM 1:3

Extra over hard wearing stone slabs for dge polishing/chamfering/noising/ grooves bevelling etc complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry (in portion), built in cement mortar, cum including all quoins, arches, pillars, etc complete all as specified and diected.

M&L for brick work with sub class 'B' bricks stright or curved on plan exc 6 m mean radius and built in CM 1:6 complete all as specified and diected.

All as per item No 36 abovde but half brick thick wall built in CM 1:4

S&F white vitreous china squatting pan, 'orissa' pattern, water closed of size 580x440mm each with integral foot rest, P/S trap etc, fixed in repair complete all as specified.

S&F vitreous china water closet, couple closet of size 795x360x640 mm complete with and including P/S tap, PVC solid type seat cover etc fixed in repair complete all as directed (Make -Jaquar or equivalent as approved by GE).

S&F white vitreous china washed down water closet pan wall mounted (pedestal pattern) white with and including P/S trap, PVC solid type seat cover & concealed flush tank etc complete all as specified and diected. (Make- Jaquar or equivalent as approved by GE).

S&F vitreous china wash basin of size 175x560x450mm complete with and incl all accessories (Make - Jaqur or equivalent as approved by GE ).

S&F vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all as specified (Make - Jaquar/CERA or equivalent as approved by GE)

S&F white glazed earthen ware vitreous china wash hand basin of size 550x400mm with Each and including CI brackets, 32mm bore brass CP waste coupling Inlet/outlet PVC flexible pipe etc complete all as specified and diected. (Make - Jaquar or equivalent as approved by GE)

S&F vitreous china urinal partitions white of size 310x700mm, slabs, terminating about 40 cm Each above floor line, fixed in repairs complete all as specified and diected.

M&L PVC SWR floor trap 75mm, plain with grating including setting and jointing with Each silvent complete all as specified and diected.

Taking down steel water tubing and connections, incl cleaning for re-fixing or remoavl to store 15 mm bore all as specified and directed.

S&F 15 mm dia medium grade galvanized steel tubing with all fitting fixed to walls, ceiling or laid under floors all as specified and directed.

S&F 20 mm dia GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed

S&F in repairs 15mm size stop Valves fancy type chromium plated screwed down high Each pressue with crutch or butterfly handle screwed both ends complete all as specified and diected.

S&F PVC Connections 15mm size with PTMT nuts of length 600mm complete all as specified and diected.

S&F in repairs brass chromium plated shower rose 125mm size, fixed complete all as specified and diected.

S&F 10 liters capacity PVC low level flushing cistern of approved make including ball valve, syphon set, inlet and outlet pipe, brackets etc. complete all as specified and diected.

S&F in repairs Soap dish, vitreous china white, approximat size 160x160x90mm complete all as specified and as directed. (Make - Jaquar Cat No ACN-1131N or equivalent as approved)

S&F in repair towel rail 600mm long complete all as specified and as directed. (Make - Jaquar Cat No AQN-7711A or equivalent as approved)

S&F in repair Toilet roll holder with flap complete all as specified and as directed. (Make -Jaquar Cat No AKP-35753PS or equivalent as approvedd)

S&F in repair towel ring round complete all as specified and as directed. (Make: Jaquar Cat No AQN-7721 or equivalent as approved)

S&F in repair soap dish complete all as specified and as directed. (Make -Jaquar Cat No AQN- 7731 or equivalent as approved)

S&F in repair Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer complete all as specified and as directed. (Make -Jaquar Cat No. ALD- 579 or equivalent as approved)

S&F in repair two way bib cock with wall flange complete all as specified and as directed. (Make - Jaquar Cat No ORP-10041PM or equivalent as approved)

S&F in repair angular stop cock complete all as specified and as directed. (Make - Jaquar Cat No ORP-10053PM or equivalent as approved)

S&F in repair pillar cock Chrome Plated complete all as specified and as directed. (Make - Jaquar Cat No ORP-10001PM or equivalent as approved)

S&F in repair bib cock complete all as specified and as directed. (Make - Jaquar Cat No ORP-10037PM or equivalent as approved)

S&F glass shelf 600mm long complete all as specified and as directed. (Make-Jaquar ACN-1171N or equivalent as approved)

Demolition of cement concrete of any description and in any position not otherwise specifically provied for complete all as specified and diected.

Complete removal of existing water proofing treatment of any description in any postion including cleaning, wire brushing, watering, removal of debris upto 1500 mtr distance as directed by engineer-in-charge complete all as specified and as directed.

M&L PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope complete all as specified and as directed.

Material and labour for providing water proofing treatment with five layered 4 mm thick APP (Atactic poly propylene) modified bituminous membrane reinforced with non woven polyester matt of weight minimum 160 gm/Sqm as centre core and without mulitiply layers of polyethylene finished on top and bottom with 7 micron thick flammable polyethylene, applied by thermo fusion using LPG torch on the bottom portion of the membrane after applying a coat of bituminous primer @ 0.25 Kg/Sqm over roof and finishing the treatment with one coat of bitumen @ 1.20 KgSqm all as specified. Note :- (i) An overlap of minimum 100 mm and 150 mm shall be provided on sides and at ends respectively. (ii) Membrane weight shall not be less than 4.60 Kg/Sqm.

M&L for brushing neat cement slurry with 3Kg of cement per square metre all as specified and directed.

M&L for rendering 20mm thick cement plaster in CM (1:3) on roof top surface finished even and fair including WPC by weight of 3% of total cement content complete all as specified and as directed. (Note : WPC will be measured separately)

Supply only integral water proofing compound complete all as specified and diected.

M&L for cement concrete tiles 25Cmx25Cmx22Cm thick, machine pressed, (with grey cement & no pigments), set joined and pointed in neat cement slurry in floors over and including 15 mm thick bedding layers in CM 1:3. all as specified & directed.

M&L for framed work such as grills, gratings, plates, rafter, purlins etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors, ladders, framed balusters, walk ways railings framework of water tanks and similar work conforming to Fe- 290 Gde E-165 complete all as specified and diected.

M&L for 100 mm dia cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls all as specified and directed.

M&L for 75 mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls all as specified and directed.

S&F CI bends (any radius) diminishing pieces or tapers (larger bore measured) fitted with oval access doors of following sizes :-

(a) 75 mm dia

(b) 100 mm dia

S&F CI branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches of following sizes :-

(a) 75 mm dia

(b) 100 mm dia

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus surplus soil to a distance n.exc 50 m and making good surface.

M&L for cleaning all loose laitance on the concrete substrate and applying one coat of epoxy bonding agent on exposed concrete surface to ensure bond between old concrete & new concrete by brush application. Make - brand Monobond SBR of Krishna Conchem or Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd.

M&L for rendring minimum 20 mm thick polymer modified mortar in cement mortar (1:3) with graded quartz sand with additive Monolith PMM of Krishna conchem or polymer mortar HB of Dr. Fixit or Shalifix RM SG 01 of STP Ltd 15% by weight of cement in one coat with and including curing as per manufacturer's instruction complete all as specified and as directed.

M&L for drilling and fixing Rohibb Teflon nozzles in RCC members including drilling holes of 12 mm dia, 50 to 100 mm deep holes works shall be carried out as under :- (i) Cleaning of holes, clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles, insert 12 mm dia Rohibb Teflon nozzles in cleaned holes, external end of nozzles to be machine to receive outlet of grouting gun. Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing, cure the system for min 12 hrs. (iii) Cutting of nozzles cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2 mm wide fix the injection nozzles directly over the cracks at intervals of 6 to 9 inches, using a drilling machine, fix PVC/MS nozzles in these holes with fast setting epoxy putty & let it dry for 2 to 3 days. Also seal the crack between the ports with epoxy putty. (v) In case where the crack is wider than 2 mm upto 4 to 5mm, drill holes at the side of the crack in a staggered fashion at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also seal the face of the crack with a liberal application of the epoxy putty.

M&L for injectig of site mixed cement slurry grout, mixed in specified proportion containing cement, sand water with addition of plasticizers (approved make) & migratory corrosion inhibitors, water cement ratio shall be varied between 0.5 to 1.00 for each hole, shrinkage compensating cement slurry mixed to a lump free fresh creamy consistency, mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled. Make/brand of Epoxy grout - Dr. fixit epoxy injection or EPCO KP-HP-250 of M/S Krishna conchem or Shaligrout E1 to STP Ltd.

Providing and applying jacketing around edges of columns, beam, wall, corners, grooves, alters, steps, piers and other concrete structure with MICRO CONCRETE (MOLITH-MC) of M/S Krishna Conchem or equivalent as directed, incl all lits, shuttering drilling holes and fixing shear anchor as per specification complete. Note. Rate includes jacketing, formwork and micro concrete, reinforcement shall be measured and paid separately. Micro concrete Make - M/S Krishna Conchem/Dr. fixit/Fosrok.

M&L for RCC (1:1½ : 3) type A-1 using 20 mm graded agg n.exc 1.5 M span complete all as spefified and directed.

M&L for TMT mild steel bars, 10 mm dia and over, cut to length bent to shape required, incl cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe- 410-S or Fe-410-Ocomplete all as specified and diected.

All as per Srl item No 85 herein before but as in stirrups.

Hard drawn steel wire fabric cut to lengths,bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9 mm in dia supplied and fixed in reinforcement weight not exc 4 Kg per Sqmcomplete all as specified and diected.

S&F for rolled mild steel sections of Grade Fe- 410W, (Gde-E-250) quality-A as in post runners, rafters, purlins steps etc fixed with connecting plates incl bending welding etc complete.

M&L for preparation of surfaces of wall, chajjas, parapets, roof facia, ceiling etc including preparation of cracked surfaces, removing loose materials after filling the crack with crack filling compound of approved grade and applying one coat of 100% acrylic exterior emulsion with and including irrection and dismantling of scaffolding to carrying out works upto three storeys buildings complete all as per manufacturers instructions and as directed.

M&L for taking down, chipping and removing the loose, spailt, damged cement concrete cement mortar surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement, wire brushing and cleaning the exposed steel rinforced bar, applying rust remover over the cleaned re-bar surface wash the rebar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement and hard drawn steel wire fabric for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortar in CM 1:3 mix, 40 mm thick un two coats using polymer as per manufacturer's instructions complete all as specified and directed. Make : Dr.Fixit/Sunanda/Chemestic/Fosrok.

Supply only micro concrete Make Dr. Fixit/Sunanda/Chemestik/Fosrok

M&L for preparation of old decorated surfaces of walls by washing rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper (Oil emuolsion) on walls complete all as specified.

M&L for preparation of old decorated surfaces of ceilings by washing, rubbing down and stopping and applying one coat of oil bound distemper (Oil emulsion) on ceilings complete all as specified.

Removal of tree roots and branches spreed over stone wall joints and making good the stone wall joints by flash pointing in CM 1:4 including provision of necessary scafolding and removing the debris outsidem MOD.

Removal of debries, old concrete spoils etc out side of MD land exc 5 KM all as specified and directed.

Excavation over areas n.exc 1.5 M deep and getting out in hard/dense bituminious surfaces or scarifying or picking gravelled, macadam or bituminous macadam surface complete all as specified and diected.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone agg) as in concrete bed including packing under and hauncing against the sides of pipes after they are laid and tested complete all as specified and directed for 300 mm internal dia of pipe complete all as specified and diected.

M&L for SGSW pipes 300mm dia grade 'A' laid in trenches and jointed complete all as specified and directed.

Returning, filling in including spreading, leveling watering and well ramming in layers not exc 25 cm thick soils complete all as specified and directed.

Removing excavated materials (Soils) out side of MD land exc 5 KM all as specified and directed.

Dismantling/Taking down old U/S light fittings removing from site and making good the distrubed surface matching with existing surface all as per directed.

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100 volts, (Make: Havells/ Finolex/ Plaza) drawn through and including non metalic rigid PVC casing and caping not less than 25mm with all accessories fixed on wall//ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of PVC modular box with cover plate in any size fixed on wall for fixing the switches, switch sockets, sockets, regulators etc complete all as specified for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza (c) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One light point controlled by one 5A switch

One Fan point controlled by one 5A switch

One 5A flush type switch socket point on same board board

One 5A flush type switch socket point on independent board

M&L for point wiring (Work station for Computer) complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etc fixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module ( Make : schneider elect/legrand mosaic/anchor ave) complete necessary electric connection for each workstation point comprising of 02 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza

M&L for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC modular box with cover plate complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza (c) Switch socket measured & paid separately.

S & F modular switch 1 way 6A, 1 module complete all as specified and directed. Make: Anchor/Roma/Legrand.

S & F modular socket, 6A - 2/3 pin combined 2 modules complete all as specified and directed. Make: Anchor/Roma/Legrand.

S & F modular switch socket combination 6/16A, 2/3 pin, combined 2 module complete all as specified and directed. Make: Anchor/Roma/Legrand.

S&F for modular fan step regulator, 120W - 2 modular complete all as specified and directed. Make: Anchor/Roma plus/Legrand

S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed.

Supply and fixing in repair Ultra slim edge lit type recess mounting LED 2X2 Luminaire 36 watt and extruded aluminium housing with anti-glare diffuser provides high quality ecomonic energy saving lighting LED Luminaire suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and as directed. Make: Crompton cat No LCPL-36-CDL(2X2) / C&S cat No LTCRSLM36WATT 2X2 or equivalent Cat part in Surya / Philips

Supply MCCB, 415 volts, 4 pole of capacity 125 Amps, 18 KA, ICS = 100% ICU including fixing accessories etc complete all as directed. Make - Legrand cat part no 4200 16 or equivalent Cat part in siemens/C&S

S & F MCB SPN 63 Amps,10KA 'C' Curve 240V complete all as specified and directed. Make : Legrand/Seimens/C&S

S & F MCB SP 6-32 Amps,10KA, 'C' series 240V complete all as specified and directed. Make : Legrand/Seimens/C&S

S & F in repair of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A complete all as specified and directed. Make: Siemens/Legrand/C&S .

M&L for sub-main wiring with 2 runs of 4.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza

M&L for sub-main wiring with 2 runs of 6.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in andincluding non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 6.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza

S & F exhaust fan of sweep 300 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Havells/CG/ khaitan

Material & labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire all as specified and directed.

S&F in repair of SPN DB 08 Way, 240V with 100A copper busbar each phase, double door type, IP43- IK 09 protection suitable for housing MCB's all as specified and directed. Make: Legrand cat No 5076 11 or equivalent cat No. in Seimens/GE.

S&F in repair of vertical type TPN DB 6 Way, 240V with 200A busbar, double door type, IP43- IK 09 protection suitable for housing MCB's all as specified and directed. Make: Legrand cat No 5077 26 or equivalent cat No. in Seimens/GE.

Supply, installed and testing of white, vertical water Heater (gyeser), Wall Mounting Accessory and 2 Flexi pipes, electric driven (single phase, 240 Volt, 50 Hz ) having approx storage capacity of 3 Ltr, 3 KW, Outer Body: Rust and shock proof ABS outer body for long life. Inner Tank: Stainless steel inner tank of 304 grade with PVC 3 core sheathed stranded copper cable of required size and 3 pin top including fixing with nut bolts and washer duly grouted in wall firmly with cement etc complete all as directed. Make :-Havells Instanio 3-Litre Instant Geyser (White/Blue) or equivalent in PHILIPS/ RICOLD. Note:i) Product Warranty - 2 years on product and 5 years on condenser. ii) Tank Warranty-5 years. iii) Heating element: Copper Heating element iv) LED Indicator: Colour-changing LEDs that change from blue to amber to indicate the hotness of the water. v) Power Cord: Fire retardant power cord for maximum safety . 0.65 MPa. vi)Bar Pressure: Suitable for high rise buildings and pressure pump applications ISI Marked and ISI certification.

S & F in repirs LED light fitting 20W, 230 V, 4 feet surface monted, indoor decorative aluminium extruded T- 5 LED batten, integrated type etc., complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make- C & S cat part No. LTTB4F20WLED/W (Nakshatra series) , or equivalent cat part in Crompton/Wipro /Philips

Supply and fixing walll/surface mounted 10W LED, 2 feet batten fitting engineering plastic battern with white acrylic cover complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core copper conductor cable with suitable size and all as directed. Make : C&S cat part No. LTTB2F10WLED/W or equivalent in CG/ Wipro/ Bajaj / Philips

ROHIT CONSTRUCTION

MADHU ENTERPRIZES

georson constructions