PROVN OF A COMPOUND WALL (LENGTH 110RM) BACK SIDE OF BLDG NO T-4 AT MIL WING (LENGTH 110RM) OF 515 ABW AND OTHER SANCTIONED WORKS UNDER GE(SOUTH) BANGALORE

Amount

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

M&L cement concrete 1:4;8 type D2 using as in foundation filling and mass concrete complete all as specified and as directed.

M & L reinforced cement concrete M-25design mix as in foundation, incl rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs under reamed piles and mass concretecomplete all as specified and as directed.

M & L reinforced cement concrete M-25 design mix as in columns, pillars, piers, posts and struts complete all as specified and as directed.

M & L reinforced cement concrete M-25 design mix as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed.

M & L MS TMT bars 10 mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hopping for columns, hooking ends and binding with and incl mild steel wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M & L mild steel TMT bars 5mm dia and over upto and incl 10mm dia, cut to length, bent to shape required, incl cranking, bending spirally for hooping for in stirrups, spaces and binders and incl mild steel wire (anealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for rough finished formwork to sides of flat concrete foundations, footings, based of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc complete all as specified and as directed.

M&L formwork to edges of concrete flats, breaks in floors, openings in concrete wals, floors and roofs and sides of RCC/PCC bands in walls, horizontal of slopping, and similar work complete all as specified and directed.

M&L precast cement concrete 1:3:6 type C-1 as in block masonry with solid blocks, exc 10 cm in width and setting in mortar complete 1:4 complete all as specified and as directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 incl finished even and smooth (without using extra cement) complete all as specified and as directed.

M & L preparation of newly plastered surfaceof walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

S & F framed brackets of angles, MS pipes or tees with web and flanged cut to shape, drilled and countersunk for screw, incl bending and welding angles as necessary guesset plates, reveting etc., n exc 10Kg each brackets conforming to Fe 290 Gde E 165 (Brackets conforming each to be measured under structural steel) complete all as specified and as directed.

M & L preparation of new steel and iron wk any description over 10 cm in width and priming with a coat of red oxide zinc chrome and applying two coats of synthetic enamel paint complete all as specified and as directed.

S F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails incl securing or tying at crossing with and provision of galvanised mild steel wire complete all as specified and as directed.

M & L providing cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) in lintel upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones bed plates, kerbs incl weathering slightly rounded or chemfered angles and throating complete all as specified and as directed.

S & F Broken glass coping on top of walls in CM 1:3 complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n exc 25 cm complete all as specified and as directed.

Removing excavated material (Soil) n exc. 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Demolition of cement concrete,roof tiles (unreinforced) in Roofs of any description and in any position not otherwise specifically provided for including removing the debris out side the MD land complete all as specified and as directed.

Roughning Surfaces of old concrete floor by Picking,sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0Kg of cement per Sqm complete all as specified and as directed.

M&L 40 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate), as in roof treatment etc complete all as specified and as directed.

M &L providing cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) in roof kerb or mud stops, rounded or chamfered complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces mixed with integral water proofing compound as per manufacturer's instructions, surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. (Note :- Water proofing compound shall be measured and paid for separately as supply only under relevant item of this schedule).)

Supply only integral water proffing compound ISI Marked as approved, all as specified and as directed by Engineer-in-Charge.

M&L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) APP modified water proofing memebrane as per IS 16540/16532-2017 mineral finish , 3mm thick and weighing not less than 3.80 kg per Sqm reinforced polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminous aluminium paint @0.10 Ltr per Sqm complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc, incl raking out joints, hacking for key scrubbing down with water, etc. including removing the debris outside MD land complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls incl taking down complete all as specified.

M&L preparing newly surfaces of walls and applying two coat of distemper oil emulsion incl 3mm thick wall care putty and priming plastered and other surfaces with alkali resistant priming paint on plastered surface complete all as specified.

M&L preparing newly plastered surfaces of walls and applying two coat of cement based paint and other surfaces over one coat of clearcole (Primer) complete all as specified.

M&L preparation of old plastered surfaces of walls and applying two coats of white wash.

M&L preparation of old plastered surfaces of ceiling and applying two coats of whtie wash.

M&L preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L Complete removal of existing treatment of old surfaces of walls and applying two coat of distemper oil emulsion incl 3mm thick wall care putty and priming plastered and other surfaces with alkali resistant priming paint on plastered surface complete all as specified and as directed.

M&L Complete removal of existing treatment of old plastered surfaces of walls and applying two coat of cement based paint and other surfaces over one coat of clearcole (Primer) complete all as specified.

M&L for repairs to existing steel window / ventilator hinges by means of replacing the old hinge with box type and welded to steel shutter and frame , easing the shutter, and making good the suface finsh to match the existing wall surface complete all as specified and directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm complete all as specified and directed.

S&F steel windows with side hung shutters incl projecting type hinges with steel handle and steel peg stay, complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F solid PVC door frame at size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side colour PVC shet to be fitted in the M.S frame selded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement fixed to frame complete all as specified and directed.

S&F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thick 2nd class hardwood rail and styled plain framed panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commerecial veneering on both faces. The size of rail and stiles as per IS : 1003 (Part-I), klin seasoned and chemically pressure treated complete all as specified and directed.

S&F 30 mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing galss, etc., size of member of shutters as specified in SSR Pt-I, section 8, clause 8.24 (a) complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 100 mm long but hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F 200 mm long brass barrel tower bolts, with barrel of extrude section and rolled or cast bolts and fixed complete all as specified and directed.

S&F 300 mm long brass sliding door bolts with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F 150 mm long extruded brass handles, fabricated type polished complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts and extrude section and fixed complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips or sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium ally fixed complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

M&L preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F steel ventilators with centre hung shutter incl two pairs of brass cup pivots, catch spring and pulley wheels, complete all as specified and directed.

S&F Figured glass Pin head type Glass 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L 40 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate), as in sub base of floors complete all as specified and directed.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F coloured Glazed ceramic tile in vertical surface area exc 0.06 sqm but n.exc 0.12 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick on fair faces of brick work or concrete surfaces as backing coat in cement mortar 1:6 complete all as specified and directed.

M&L Machine cut Cuddappah stone slab 20-25mm thick over cement screed ,machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment laid over and including 15 mm thick screed bed in cement mortar 1:6.complete all as specified and directed.

Dismantling Wall (Fibre pulp , insulation etc) or insulation board/slabs/blankets , any thickness, including cover fillets all as specified and directed

M&L for 2nd class hard wood clean sawn as in scantling framed and fixed to walls with screws etc all as specified and directed.

Supply and fix Bonded mineral wool blanket slab made from glass density 24kg/cum and fixed as per maker's instructions, 25mm thick complete all as specified and directed

S&F 18/19 mm thick Pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with invisible screws to timber frame work etc complete all as specified and directed.

M&L 2nd class hard wood plain fillets, square, rectangular or trinagular in section, clean sawn, secured with nails or brads, sectional area n.exc 3 sqcm complete all as specified and directed.

M&L 2nd class hard wood plain fillets, square, rectangular or trinagular in section, clean sawn, secured with nails or brads, sectional area exc 3 sqcm but n.exc 6 sqcm complete all as specified and directed.

M&L preparing new or previously untreated wood and wood based surface of any description, under 10 cm in width or girth and applying two coats of synthetic varnish ovar a coat of wood filler liquid transparent complete all as specified and directed.

Providing and fixing in position wall paneling at all heights With 10 mm thick fully perforated Square/Square butt edge GRG (GlassFiber Reinforced Gypsum) panels/ tilesFully PerforatedGRG ( GlassFiber Reinforced Gypsum ) panels/tiles of size 595 x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99% , NRC 0.80 to 0.85 as per IS 8225:1987, Non Combustible as per BS 476 ( Part 4)-1970 and light Reflectance of 75% to 85% ( Minimum ), comprising of a frame made from especiallyfabricated galvanized mild steel sheet 0.50 mm thick pressed section(galvanizing @120 grams per sqm including both sides) i.e. vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedgetype expanded zinc alloy dash fastener with 10mm bolt.

This same channel is then to be fixed in horizontal direction at 600mm centerto center so as to form a grid of 600mm x 600mm. Glass wool of50mm thickness is then to be inserted in the slots and finally GRG (Glass Reinforced Gypsum)non combustible panels/tiles are to be screw fixed with self Tapping pan head nickel coated mild steel screws of size 13 x 3.2mmon to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finishedusing recommended jointing compound andfiber joint tape roll 50mm wide (90 meter )roll and two coats ofprimer suitable for paneling as per manufacturer’s specification asPer direction of Engineer-in-Charge all complete. Make – Diamond Ceilings/Gypcore/Shera/Maruti Gypsum & all as approved by GE

Providing and fixing false ceiling at all heights With semi peroforated 12 mm thick micro tegular edged fully perforated Square/Square butt edge GRG (GlassFiber Reinforced Gypsum) panels/ tilesFully PerforatedGRG ( GlassFiber Reinforced Gypsum ) false ceiling tiles of size 595 x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99% , NRC 0.80 to 0.85 as per IS 8225:1987, Non Combustible as per BS 476 ( Part 4)-1970 and light code description unit rate unit rate No. 429 Sub head : 26.0 New Technologies and materials reflectance of 85% ( Minimum ), to be laid true horizontal levels suspended on inter locking metal T- Grid of hot dipped galvanized iron sec of 0.33mm thick (galvanizing @120 grams per sqm including both sides)

comprising of main -T runners of size 15 x 32mm of length 3000mm, cross - T of size 15 x 32mm of length 1200mm and secondary intermediate cross T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from Ceiling using galvanised mild steel items (galvanizing @ 80gms per Sqm) i.e., 50mm long , 8mm outer diameter M-6 dash fasteners,6mm dia fully threaded hanger rod up to 1000mm length and L shaped level adjuster of size 85 x 25 x 2mm, galvanised iron perimeter wall angle of size 24 x 24x0.4mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws . The work shall be carried out as per manufacturer’s specification ,drawings and as Per direction of Engineer-in-Charge all complete. Make – Diamond Ceilings/Gypcore/Shera/Maruti Gypsum & all as approved by GE

Supply and fixing LED flood light of capacity 150Watt fittings made up of pressure die cast aluminium housing with toughned glass and high power LED secondary lenses with IP 66 protection , option 110LPW including dismatling old one complete all as specified and directed Make - Crompton Cat part No CF-501-150-30-60D-SL-GL-NGG equivalant of Wipro/Philips.

S&F PVC Conduit pipe from PVC Junction Box to street light bracket for protection of cable fixing clamp on PCC poles drilled the hole and insert a PVC gutti and screwed suitable size but bolt including taking down old conduit pipe any size complete

S&F PVC 3 Core copper cable 1.5 Sqmm insulated for fixing of junction box to street light fittings including dismantling of existing wire any size any capacity complete all as specified and directed.

M&L for fabrication work square type angle iron frame for suitable size top of eletric pole for fixing of 4 No LED flood lights on existing steel pole Balwant line children park area cutting , grinding, welding , drilling, fixing all as per specified and directed by Engr in Charge .

Supply,installation,testing and commisioning factory made,CPRI Approved LT Panel board indoor type, of size not less than 900x900x600mm powder coated made of 2.0mm thick CRCA Sheet,weather and vermin proof with double stud hinged door front and back open with internally locking arrangement and externally locking arrangement with drop bolt,shutter type windows at both sides of top and bottom duly internally secured with wire mesh,GI earthing strip stud at both bottom side,removable gland plate with compartmentalised cubical with 1.6mm thick CRCA sheet front opened double stud hinged door, all switch gears and changeover switch suitable to accomadate comprising of the following imcluding dimantling old LT Panel Board :-

Incoming

(i) MCCB 250 amps,25kA, 415 Volt,50Hz, 4P With thermal based release-1No. (Make Indoasian /Hvaless/Legrand

(ii) LED cluster indication lamp(R Y B) set of 3-1set

Busbar : - Aluminium busbar 3 phase 4 wire of 100 to 200 Amps supported with ebonite insulation at 20cm internal -1set

Outgoing

(i) MCCB 63 Amps 415 Volt,50Hz,- 06 Nos. for motor starter (Make- Indoasian/havells/Legrand )

(ii) MCB TPN 63 Amps 415 Volt,50Hz, - 01 Nos. For spare (Make- Indoasian/havells/Legrand

Taking down carefully the existing unserviceable batten / conduit / concealed type aluminium point wiring for light, fan, socket 5 Amps and 15 Amps complete removing the same including fittings / fixtures and making good the disturbed surfaces of walls, floors, ceiling etc complete all as specified and as directed.

Taking down unserviceable main switch / DB, teak wood boards etc complete all as specified and as directed.

M & L point wiring in concealed with PVC insulated, sheathed, single core multistranded copper conductor cable (FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its accessories & pressed steel terminal boxes and providing 3mm thick ISI marked laminated sheet cover and brass screws with cup washers for fixing switches / socket / regulators etc including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 for one light / CB point controlled by one switch, complete all as specified and as directed.

All as per item no 77 above but for one ceiling fan / Exhaust fan point controlled by one switch.

All as per item No 77 above but for one 3 pin 5 Amps socket outlet point on independent board.

All as per item No 77 above but for one 3 pin 5 Amps socket point on the same board with other switches.

All as per item no 77 above but with cable 2.5 Sqmm including 2.5 Sqmm cable as earth wire for 15/16 amp socket point complete all as specified and as directed.

M & L switch piano, flush type single pole, one way 5 Amps

M & L switch socket combination 2 in 1, 3 pin 5 Amps flush type universal.

M & L switch socket out let 2 in 1, 3 pin 5Amps complete all as specified and as directed

M & L switch socket combination 2 in 1, 3 pin 15Amps flush type universal complete all as specified and as directed.

S & F step type electronic fan regulator flush type, 230 volt, AC complete all as specified and as directed.

M & L ceiling rose 3 Phase / PVC / Polycarbonate isolated body all as specified and as directed.

S & F in repairs MCB single pole, 240 volts 6 to 32 Amps all as specified and as directed.

S & F in repairs MCB single pole and neutral 32 Amps 240 volts complete all as specified and as directed.

S & F in repairs MCB TPN 63Amps 415 volts all as specified and as directed.

S & F MCB DB double door type made out of CRCA mild steel sheet surface mounting, TPN 4 way with 200 Amps rated bus bar, 415 volts IP-43 with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including taking down of existing one all as specified and as directed.

S & F Sheet metal enclosure (for DB's when MCB's to be used) single pole and neutral Double door 8 way, 240 volts all as specified and as directed.

S & F LED street light 35 watt with pressure die - cast housing along wit prismatic polycarbonate diffuser and LED's with secondary optics and IP 65 protection complete with all accessories including connecting up with twin core twisted flexible copper conductor cable of suitable size 24/0.2mm and taking down old unserviceable street light fitting complete all as specified and as directed.

S & F LED lights fitting 1 x 20 watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up three core flexible copper conductor cable of suitable size from ceiling rose including taking down old unserviceable existing light fitting complete all as specified and as directed.

M & L submain wiring concealed type with four runs of single core, PVC insulated, unsheathed multi stranded copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) including earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all accessories such as bends, tees, junction boxes, elbows including taking down the existing one complete all as specified and as directed. Note: Four runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length.

M & L earthing complete with GI earth plate Electrode 60cm x 60cm x 6mm thick buried directly in ground (earth plate not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5metre below normal ground level connected to galvanished earth wire 4.0mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate no 3 of SSR Part I connected to earthing test point all as specified or indicated including GI pipes 15mm dia light grade for earth wire protection, necssary excavation, earthwork in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified and as directed.

Elite Constructions

M/S SIRI BUILDERS

SAI CONSTRUCTIONS