Special repairs to roof of Bldg No P-85 P-85A and P-85B (Office Complex) of AC Records and certain other sanction wks under AGE B/R II at GE (N) Ahmednagar

Amount

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cmdeep and getting out in soft/loose soil and getting out complete.

M&L for excavation over area n.exc. 1.5 mtr deep in hard/dense soil and getting out complete.

Removing of excavated material exc. 250m but n.exc. 500m and depositing where directed.

M& L for moorum/red bajari filling 300mm thick, spread, levelled, rammed, consolidated and rolled with 8 to 10 tonnes vibrator power roller to camber and gradient required including watering and well ramming complete, all as specified and directed.(Note:- Consolidated thickness shall be measured).

M&L Broken stone or boulders Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface

M/L for providing 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as directed.

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade

M&L for 30mm thick Sand filling under floors or in foundations including wateringand consolidation

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

M& L for PCC (1:2:4) type B2 with 40 mm graded aggregate as in walls or retaining walls,any thickness, size or shape including pilasters, buttresses columns, pillars,boundary and posts pillars etc all as specified and directed.

M/L for preparation new or old wooden/steel surfaces any description small aricles such as ends of posts backs of chowkats etc area exc 0.10 Sqm but n.exc 0.5sqm each and treated with tar or coal tar black paint etc complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws etc, complete all as directed

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof fixed with self tapping screws complete all as specified, colour and design as approved by GE complete all as directed

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws including dismantling corrugated steel sheeting, any gauge, thickness complete all as directed

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof fixed with self tapping screws complete all as specified, colour and design as approved by GE including dismantling of plain steel sheeting, any gauge, thickness.

S&F of steel work in post, Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. as per Fe 410 -W (Gde- E- 250) quality- A

S&F,structural rolled mild steel Fe 410-00 (Gde E-250) as in rafters perlins where connected to common rafters and running rail fixed with angle cleats or other connecting plates etc completed all as specified and directed. .

S&F,structural rolled mild steel Fe 410-00 (Gde E-250) Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

S&F,structural rolled mild steel Fe 410-00 (Gde E-250) Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment

Preparating of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described, and applying of two coats of synthetic enamel paint over one coat of red oxide, zinc chrome complete all as specified and directed.

Excavation in trences n.exc 1.5m wide and n.exc 1.5m in depth for foundation hard/dense soil and getting out as directed.

Excavation in trences n.exc 1.5m wide and n.exc 1.5m in depth for foundation hard/dense soil and getting out as directed.

Excavation in trences n.exc 1.5m wide and n.exc 1.5m in depth for foundation soft/disintegrated rock and getting out as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded aggregate) as in foundation /mass concrete etc.

M&L for brickwork with fly ash bricks straight or curved on plan exc 6m mean radius,built in CM 1: 6 complete all as specified

M&L for reinforced cement concrete Type B1(using 20mm graded aggregate) Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like

Formwork for soffits of suspended slab as roof slab landing and similar work not exc 200mm thick (horizontal and sloping) flat rough finished surfaces of concrete

M&L for coloured glazed ceramic tiles digitally printed 300x450mm , 7-8 mm thick as approved by GE as in dado / skirting or on vertical surfaces, over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.

Material and labour for joint free / rectified anti skid ceramic coloured tiles 7-8mm thick matching to dado tiles area of each tile 400x400mm , as in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed.

M&L for joint free anti skid ceramic coloured tiles 300x300mm 7-8mm thick matching to dado tiles area of each tile , as in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed.

M & L for Plain cement concrete in PCC 1:3:6 type C1 using 20 mm graded aggregates in surface channel and drain all as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

Returning, filling including spreading levelling, watering and well ramming in layers n.exc 25cm in layers n.exc 25cm in soft disintegrated rock

Returning, filling including spreading levelling, watering and well ramming in layers n.exc 25cm in layers n.exc 25cm in soft disintegrated rock

Removing excavated (soil) material n.exc 50m and depositing where directed at a level n. exc 1.5m above the starting point

M&L 150 mm dia salt glazed stomeware drain grade 'A' pipes laid in trenches and jointed as specified.

M&L for Reinforced concrete pipes 200 mm bore, class NP2, laid and jointed complete with collars

PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) in bed to 150 mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested.

M&L for concrete bed to drain pipes in PCC 1:4:8 type-D2 using 40 mm graded aggregate including packing under, and haunching against the sides of pipes for 200 mm bore pipes after they are laid and tested; in

M&L for PCC 1:3:6 Type - C1 using 20 mm graded aggegate as in coping including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for cutting into existing manholes for connecting new drains of 150mm bore making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round on 3/4 section) in cement concrete 1:2:4 tye B-1 smooth finished and retorming benching as required.

M&L for cutting into existing manholes for connecting new drains of 200mm bore making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round on 3/4 section) in cement concrete 1:2:4 tye B-1 smooth finished and retorming benching as required.

Supply and fixing precast Hume Pipe septic tank of capacity 50 users including necessary excavation and earthwork in any type of strata etc complete all as specified and directed by Engineer-in-Charge Note : (i) Septic tank shall be kept minimum 15 cm below GL and shall be laid according to slope of sewage line. (ii) Make and material shall be as approved by GE.

M & L for Rendering 10 mm thick in cement mortar 1:4 surface finished even and smooth with setting coat on fair faces of brickwork or concrete surfaces.

M&L for RCC pre cast manhole cover slab in 1:2:4 type -B1 using 20 mm aggrgate incl necessary form work and set in CM 1:6, cover slabs (for man holes etc.)

M&L for Mild steel bars up to 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L RCC (Nominal Mix) 1:2:4 type B-1 using 20 mm graded aggregate as in foundation, includings rafts footings ,foundation beams,plinth beams bases for columnsetc complete all as specified and directed

M & L for pre-cast cement concrete solid blocks, exc. 10 cm in width type D-0 1:5:10 using 20 mm graded aggregates and setting in mortar 1:6 including demolition complete all as directed.

M&L RCC (Nominal Mix) 1:2:4 type B-1 using 20 mm graded aggregate as in beams,cantilevers,linel,shelves etc complete all as specified and directed

M&L RCC (Nominal Mix) 1:2:4 type B-1 using 20 mm graded aggregate as in Chajja complete all as specified and directed

M&L MS TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including annealed MS wire not less than 0.90 mm dia as required and as directed by Engineer-in charge.

M&L MS TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including MS wire (annealed) not less than 0.90 mm dia as in stirrups spaces, binders and nibs etc. complete.

Formwork to sides of concrete foundations, footings,bases of columns,raft beam plinth beam flat rough finished surfaces of concrete etc complete all as specified and directed

Formwork to sides and soffits of floor beam,roof beam,cantilevers, lintel shelves and similar work flat rough finished surfaces of concrete

Formwork to chullah hoods, chajjas,troughs similar items including edges flat rough finished surfaces of concrete.

S & F pressed steel door frame of size 100 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified,

M&L for 35 mm thick plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S&F Solid PVC Door frame size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid PVC moulded Door shutter with particle board core, 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back space, supplying and fixing in frame at site as per specification & drawing.

S&f Steel ventilator with top hung shutter including hinges, steel peg stay, complete

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

S&F MS flot iron as in hold fast and similar work as specified Fe-290 Gde- E-165

S&F stainless steel butt hinges 100mm size

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised.

S&F 100mm long extruded aluminium alloy handles, fabricated type, anodised.

S&F 100mm long aluminium anodised barrel tower bolts of extruded section.

S&F aluminium alloy, anodised, sliding door bolt of length 300mm, with hasp and staple (bolt type) and fixing clip of sheets, cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy and fixed.

M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and application of two coats of synthetic enamel paint over one coat of pink primer etc,complete all as specified and directed.

S&F PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent cement.

S&F PVC (SWR) 110mm bore (dia) soil, waste and ventilating Pipe, Single Socketed, in any length with rubber ring Joints laid in trenches, including taking down of any type complete all as specifed and directed.

S&F PVC (SWR) 75mm bore (dia) soil, waste and ventilating Pipe, Single Socketed, in any length with rubber ring Joints laid in trenches, including taking down of any type complete all as specifed and directed.

S&F PVC (SWR) 110 mm bore (dia), Bends any type, etc. and Jointing with Solvent Cement, complete all as specified and as directed

S&F PVC (SWR) 75mm bore (dia), Bends any type, etc. and Jointing with Solvent Cement, complete all as specified and as directed

S&F vitreous china counter top, wash hand basin, "OVAL" shaped,white of size 550x400mm mounted granite stone slab platform by cutting on oval shaped etc and necessary fittings complete all as specified and directed.

S&F 40mm bore low density polythene pipes (HDPE) of pressure rating 6 Kg / cm2 fixed complete to walls, ceiling or in floors etc.

Supply only 10 Ltrs. Capacity PVC valveless,syphonic action type, flusing cistern low level,white,with inlet,ball valve,float and handle including brackets complete all as specified and directed.

S&F vitreous China squatting pan, 'orrisa' pattern wc of size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe but including 'P' or 'S' trap and provision of lime concrete bedding in repairs.

S&F Vitreous China urinal, Half satll type, white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe andwaste pipe)

S&F Looking mirror of size 800 mm X600 mm, etc complete all as specified and directed by Engineer-in-Charge

Taking up or down 15 mm bore steel tubing and connections

Ditto all as per item No 80 above but 20 mm bore tubing

Ditto all as per item No 80 above but 25 mm bore tubing

Supplying and laying 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings complete all as specified.

Ditto all as per item No 84 above but 20 mm bore tubing

Ditto all as per item No 84 above but 25 mm bore tubing

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified.

S&F stop cock/ anglecock/ two waycock cast copper alloy, Chromium plated fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets all as directed.

S&F bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge.

S&F 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe all as directed.

M&L for 50mm thick Cement Concrete 1:3:6, type C-2 ( Using 40 mm Graded Stone Aggre-gate) as in plinth protection, laid in alternate bays , finished Concrete Surfaces Even and Smooth without using Extra Cement, expansion joint filled with 85/25 bitumen & saw dust as complete as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, triple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe, tank nipple and connected complete all as directed.

Taking down cement mortar plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for rendering, 10 mm thick on brick / concrete surfaces in cement mortar 1:6 surfaces finished even and smooth without using extra cement

M&L for rendering, 15 mm thick on stone/brick / concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering, 15 mm thick on brick work/ concrete/ RCC Parapet wall surfaces in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and directed.

M/L for 20 mm thick rendering in CM 1:4 in two coats (15+5) with water proofing compound incl. finishing the surface even and smooth without using extra cement. (WPC shall be measured and paid seperately)

Supply only integral water proofing compound.

M&L for rendering 5mm thick on concrete surface of ceiling in CM 1:3 finished even and fair without using extra cement complete all as specified and directed.

Material and labour for providing water proofing treatment on roofs, as per manufecturer's instructions and as specified after taking down/out as existing at site :- (a) Cleaning the newly plastered surfaces with wire brushes and applying a coat of bituminous primer @ 0.30 ltrs/sqmts and allow to dry. (b) Applying and laying torch APP polymer modified bituminous membrance 3 mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts by thermofusion process as per manufacturers specification including applying one coat of aluminium paint. Make : Super Thermolay of STP / Equivalent in Dr Fixit, FosRoc. Note : (i) Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE. (ii) Certificate from manufacturer shall be submitted by the contractor. (iii) Including taking down of old APP Membrane.

M&L for rendering 10mm thick in CM 1:4 over concrete surfaces finished even and smooth including water proofing compound as per manufacturers instructions.

Dismantling/Demolition of existing roof terracing of cement/brick concrete(un-reinforced) and existing water proofing treatment of any thickness in any position on top of roof of building, cleaning surface of roof with brush/mechanical brush and with water throughly to romove all dust/dirt and loose particles to expose bare concrete roof slab and romoval of rubbish/demolished material out side MD land complete all as specified Note : Demolition should be done by chiselling.

M&L for PCC (1:2:4) Bo using 12.5 mm graded stone aggregate as in levelling padding course over RCC roof surface including rounded or chamferred on edges etc,with approved water proofing compound all as per manufacturer's instructuions on the roof surface to achieve requisite slope all as specified and directed. (Note :- Supply only water proofing compound shall be measured & paid separately).

M&L Providing cement concrete Type C1 1:3:6 20mm graded aggregate) in kerbs or mud stops, rounded or chamfered on edges

Supply only polymer based lilquid water proofing compound.

M & L for preparation of newly plastered surface of wall and apply two coats of OBD over a coat of primer any height including scaffholding etc complete all as directed.

M & L for preparing old plastered surfaces of walls and apply one coat of OBD, finished with roller finish on plastered surfaces of wall any height including scaffholding etc complete all as specified and directed

M&L for preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified and directed

M & L for preparation of newly plastered surface of ceiling and apply three coats of white wash any height including scaffholding etc complete all as directed.

M & L for preparation of new plastered surfaces of wall and applying two coats for cement based paint any height including scaffholding etc complete all as directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling including cornices etc by brooming down or steel wire brushing scraping down smook soot, moulds, moss and efflorescent salt, trading oil and greasy spots and applying one coat of white lime wash at any height including scaffholding etc complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new plastered treated surfaces of walls by brooming down and and applying two coats of weather proof 100 % acrylic exterior emulsion apex ultima paint over a coat of any tint as approved by GE after cleaning the surfaces complete all as specified and as directed.

M&L for preparation of old plastered treated surfaces of walls by brooming down and and applying one coat of weather proof 100 % acrylic exterior emulsion apex ultima paint of any tint as approved by GE after cleaning the surfaces complete all as specified and as directed.

S&F 110mm bore PVC rain water pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps 8mm dia with two nuts wall nails etc including taking down of any type complete all as specifed and directed.

S&F 110mm dia PVC bend any radius, for rain water pipe completed as specified and directed.

S&F bands, straps, supports or stays for rain waterpipes, hooks (stay) heavy for large gates, hook and pintle hinges clamps, hold fasts wall ties, hooks for hanging fans and similar small articles Fe-290 Gde- E-165 or Fe-310-0 complete all as specifed and directed.

Cleaning of service tank up to 500 ltrs by removing all scales, dirt, silt, mud etc from tank and mouth of outgoing pipe including washing of tank internally with bleaching powder after removing scale, dirt, silt, mud etc from tank and removing algae from outside of tank from below bottom of tank and disinfecting tank by spraying sodium hypo chloride solution in tank, includin refixing etc complete all as specified and directed by Engineer-in-Charge. Note:- The quoted rate shall include dismantling and refixing of water tank as etc complete all as specified and directed by Engineer-in-Charge

S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball and high density plastic ball screwed to iron pipe, tank nipple and connected (Minimum weight 15mm-142Gms/20mm-210 Gms) complete all as directed.

M&L for Cutting/Forming square/V-Section grooves in plaster n exc 12mm deep and n exc 15mm on face in existing wall/chajjas and cleaning out,for APP Membrane and filling up with Dr fixit crack seal including necessary scaffoldings complete all as specified and as directed.

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl PVC Casing and capping ISI Marked with its accessories with provn of PVC boxes and fixed with brass screws cup washer for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed. Make of FRLSH Cable. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, bulkhead lights, bldg security light etc

One light point controlled by switch 5 Amp single pole one way

One fan point controlled by switch 5 Amp single pole one way

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

All as per Item No 124 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase, Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board Make of FRLSH Cable.Havells/Polycab/Finolex

S&F switch piano flush type single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge Make.Havells/Anchor/legrand

S&F Switch socket combination two in one, 5 Amp flush type 230V AC etc complete all as specified and directed by Engineer-in-Charge Make.Havells/Anchor/legrand

S&F Switch socket combination 5 Amp / 16Amp, five in one, 5 / 15 Amp 230V AC etc complete all as specified and directed by Engineer-in-ChargeMake.Havells/Anchor/legrand

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge

M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge

S & F in replacement double door Sheet metal enclosures factory made DBs SPN, 4 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No: 5076 11 or equivalent in Simens/ Hager/ L&T

Supply & fixing MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge Make .Havells/L&T/Schnider

Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply and fix Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge Make:Philips Model Name Astra line or equvivalent in Crompton/Bajaj

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts & washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using granded stone aggregate and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC, both way, lifting arrangement complete including all necessary earth work etc complete all as specified and directed by Engineer-in-Charge

Supply and fix exhaust fan,steel body AC Single phase,230 V of size 300 m sweep with ,blades frame and louvers.Make: Crompton/Bajaj/Havells

S&F in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge

M & L for Supply,laying ,connecting ,testing and commissioning and jointing , LT underground cable in replacement ,1100 volts grade, XLPE insulated, armored with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp complete all as specified and as directed by the Engineer-in-Charge of following Sizes :-

(a) LT cable10 Sqmm, 2 core.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth and getting out in harde /dense soil.

Returning, filling in including spreading, levelling, watering and well ramming in layers, n exc 25 cm thick in soil etc complete all as specified and directed by Engineer-in-Charge

Removing exacavated soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and directed by Engineer-in-Charge

Supply &lay HDPE pipe 40 mm bore for laying of LT cable complete with all accessores etc complete all as specified and directed by Engineer-in-Charge

Returning, filling in including levelling, watering and well ramming in layers, n.exc 25 cm each in soil

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point

Cutting to existing CI/GI pipe line upto 80 /50/25 mm dia for taking connection up to 25 mm dia GI pipe including insertion of CI /GITee complete all as specified and directed including Exc & earth Work

Supply and lay in trenches/or on wall medium grade steel water tubing galvanised with all fittings and joints etc complete for following size :-

(a) 20 mm bore

S&F Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

Supply and fix gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for for 20 mm bore.

M/s. R. R. ASSOCIATES

M/S. M. F. Sharif & Co.

M/s. N D Karande

MS. G.A. CONSTRUCTION

Avinash B Kullal

M/s A G Gund