REPAIR AND POLISHING TO WOODEN FURNITURE ITEMS HELD AT GE (EAST) DELHI CANTT-10

Amount

CHAIR EASY (FD-229)

Replacement of old unserviceable front leg from existing Chair Easy and S&F the same size new front leg made of Ist class hard wood seasam/teakwood all as shown on drawing and as directed.

(ii) All as per srl item No. 1.01 here- in- before but rear leg.

(iii) All as per srl item No. 1.01 here-in-before but arm.

(iv) All as per srl item No. 1.01 here-in-before but front/back/side rail.

(v) All as per srl item No. 1.01 here-in-before but canning bits.

CHAIR DINNING (FD-228 & 279)

(i) Replacement of old unserviceable front leg from existing Chair Dinning and S&F the same size new front leg made out of Ist class hard wood seasam/teakwood all as shown on drawing and as directed.

(ii) All as per srl item No. 2.01 here-in-before but rear leg.

(iii) All as per srl item No. 2.01 here-in-before but front/back/side rail.

(iv) All as per srl item No. 2.01 here-in-before but back rest (i.e. horizontal wooden members for back rest of size 45mm x 15mm ).

(v) All as per srl item No.3.01 here-in-before but stiffener between front leg to rear leg.

(vi) All as per srl item No. 2.01 here-in-before but stiffener for jointing to side stiffeners.

(vii) All as per srl item No.2.01 here-in-before but canning bits.

CHAIR DINNING (JCO/ORs) (FD/MAP-II/05)

Replacement of old unserviceable front leg from existing Chair Dining and S&F the same size new front leg made out of Ist class hard wood seasam/ teakwood all as shown on drawing and as directed by engineer-in-Charge.

All as per srl item No. 3.01 here-in-before but rear leg.

All as per srl item No. 3.01 here-in-before but front/back/side rail.

All as per srl item No. 3.01 here-in-before but back rest (i.e. horizontal wooden members for back rest of size 45mm x 15mm ).

All as per srl item No. 3.01 here-in-before but stiffener between front leg to rear leg.

All as per srl item No. 3.01 here-in-before but stiffener for jointing to side stiffener.

Replacement of old unserviceable PVC Seat from existing Chair Dining and S&F the same size new PVC seat all as shown on drawing and as directed by engineer-in-Charge. Make Amko, Ashok

CHAIR WRITING (FD-250 & 280)

Replacement of old unserviceable front leg from existing Chair Writing and S&F the same size new front leg made out of Ist class hard wood seesam/teakwood all as shown on drawing and as directed.

All as per srl item No. 4.01 here-in-before but rear leg.

All as per srl item No. 4.01 here-in-before but front/back/side rail.

All as per srl item No. 4.01 here-in-before but back rest (i.e. horizontal wooden members for back rest of size 50mm x 15mm).

All as per srl item No. 4.01 here-in-before but stiffener between front leg and rear leg.

All as per srl item No. 4.01 here-in-before but stiffener for jointing to side stiffeners of

All as per srl item No. 4.01 here-in-before but arm.

All as per srl item No. 4.01 here-in-before but canning bits.

S & F wooden corners made of first class hard wood seesam to legs joining top rails each with steel screws.

BED PLY TOP (FD-246 & 247)

Removing of old unserviseable plytop from bed plytop and S&F new top of same size of 12mm thick commercial ply wood, ISI marked , BWR grade of size 6.5'x3'over Bed with screws complete all as shown on drawing and as directed. (Make : Archid/ Duro/greenply

Removal of old unserviceable long rail from bed plytop and S&F new long rail as per size of hard wood seesam/ teakwood fixing the same as shown on drawing all as specified and as directed.

All as per srl item No. 5.02 here-in-before but short rail.

All as per srl item No. 5 .02 here-in-before but stiffener.

Removing of old unserviceable plywood from the existing head rest of bed ply top and S & F new OSTF plywood 04mm thick ISI marked, BWR grade to both sides including half round teak wood beading all around as per shape and size shown in drawing and fixed with nails including french polishing to ply & beading complete all as specified and directed.

All as per srl item No. 5 (v) here-in-before but from foot rest.

Removing of old unserviceable head rest from Bed plytop and S&F new head rest made out of Ist class hard wood teak including provision of 04 mm thick OSTF plywood including teak wood beading half round as per shape and size shown in drawing and fixed with nails including french polishing to ply & beading complete all as specified and directed.

All as per srl item No. 5.07 here-in-before but foot rest.

S&F new wooden corners of suitable size to bed plytop with steel screws all as shown on drawing and as directed.

SIDE BOARD (FD-241/ FD/E6/MAP/)

Removing of old unserviceable top from side board and S&F new top made out of 18mm thick exterior grade pre-laminated particle board,teak faced,ISI marked, with 04mm thick teak wood beading all-around the top all as shown on drawing and as directed. (Make:- Ecoboard/Action- Tesa / Greenply).

All as per srl item No. 6.01 here-in-before but door shutter including knobs / handles and continues piano type hinges.

All as per srl item No.6.01 here-in-before but side.

All as per srl item No.6.01 here-in-before but bottom.

All as per srl item No. 6.01 here-in-before but vertical partition.

All as per srl item No. 6.01 here-in-before but shelf.

Removing of old unserviceable back ply of side board and S&F the new back ply of same size made out of 06mm thick commercial plywood (ISI marked),BWR grade all as shown in dry and as specified.

Replacement of old unserviceable drawer with new drawer of same size and shape to Side board including knob/handle all as shown on drawing.

Removing of old/unserviceable knob / handle from the side board and S & F new 100mm long CP steel handle with steel screws as per sample ,shape and size all as per drawing and as directed.

Removing of old unserviceable legs with frame from Side board and S&F new legs with frame as per existing size made out of Ist class hard wood teak and duly polished irrespective of all as shown on drawing and as directed.

PEG TABLE(FD-236/277/284)

Removing of old unserviceable top from Peg Table and S&F new top made of 18mm thick exterior grade, ISI marked particle board duly post-formed (PFT) with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed by Engineer-in-charge. (Make:- Ecoboard/Action- Tesa / Greenply).

Replacement of old unserviceable leg from existing Peg Table and S&F the same size new leg made out of Ist class hard wood teak to Peg Table duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per srl item No. 7.02 here-in-before but long top rail.

All as per srl item No. 7.02 here-in-before but bottom rail / stiffner.

S&F new steel bracket/corners of suitable size to peg table with steel screws all as shown on drawing and as directed.

TABLE CENTRE (FD– 235 & 274)

Removing of old unserviceable top from table centre and S&F new top made of 18mm thick exterior grade, ISI marked particle board duly post-formed (PFT) with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed by Engineer-in-charge. (Make:- Ecoboard /Action- Tesa / Greenply).

Replacement of old unserviceable leg from existing table centre and S&F the same size new leg made out of Ist class hard wood teak/seesam to Table Centre duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per srl item No. 8.02 here-in-before but long top rail.

All as per srl item No. 8.02 here-in-before but bottom rail.

All as per srl item No. 8.02 here-in-before but side rail the top.

S&F new steel bracket/corners of suitable size to table centre with steel screws all as shown on drawing and as directed.

TABLE BED SIDE (FD 248 & 276)

Removing of old unserviceable top from Table bed side and S&F the new new top of same size made out of 18 mm thick exterior grade pre-laminated particle board,teak faced,ISI marked all as shown on drawing check 4mm thick teakwood beading all around duly polished as directed. (Make:- Ecoboard/Action- Tesa / Greenply).

All as per srl item No. 9.01 here-in-before but side.

All as per srl item No. 9.01 here-in-before but shelf / bottom shelf.

Removing of old unserviceable back ply from Table bed side and S&F the new back ply of same size of 06mm thick commercical plywood (ISI marked) including one coat of french polish all as shown on drawing and as directed.

TEAPOY WOODEN (FD-232, 278 & 382)

Removing of old unserviceable top from teapoy wooden and S&F new top made of 18mm thick exterior grade particle board duly post-formed (PFT) with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed by Engineer-in-charge. Make Eco board, action ,greenply

Replacement of old unserviceable leg from existing Teapoy Wooden and supply and fixing the same size new leg made out of Ist class hard wood teak/ seesam duly french polished all as shown on drawing and as directed.

All as per srl item No. 10.02 here-in-before but top long rail of Teapoy Wooden.

All as per srl item No. 10.02 here-in-before but top side rail.

All as per srl item No. 10.02 here-in-before but bottom rail / stiffner.

S&F new steel bracket/corners of suitable size to Teapoy wooden with steel screws all as shown on drawing and as directed.

TABLE WRITING (FD- 35(M) 249 & 275)

Removing of old unserviceable top from Table Writing and S&F new top made of 18mm thick exterior grade, ISI marked particle board duly post-formed (PFT) with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed by Engineer-in-charge. Make:- Ecoboard/Action- Tesa / Greenply).

Removal of old damaged door complete from Table Writing and S&F the new door of same size with piano type hinges made out of 18mm thick exterior grade pre-laminated particle board top all as shown in drawing including CP brass Knob complete all as directed by Engineer-in-Charge. (Make:- Ecoboard/Action- Tesa / Greenply).

Replacement of unserviceable leg of Table writing with new leg made out of Ist class hard wood teak/seesam all as shown on drawing including one coat of french polish all as directed by Engineer-in-Charge.

All as per srl item No.11.03 here-in-before but top long rail.

All as per srl item No.11.03 here-in-before but top short rail.

All as per srl item No.11.03 here-in-before but long/short stiffner.

Removing of old/unserviceable knob from the Table writing and S&F new CP knob all as per drawing and as directed.

S & F wooden corners made of Ind class hard wood to legs joining top rails each with 04 Nos of steel screws.

Replacement of old unserviceable drawer with new drawer of same size and shape to Table writing including knob all as shown on drawing.

Removal of old unserviceable back ply of table writing and S&F the new back ply of same size of 06mm thick OSTF commercial plywood, ISI marked including one coat of french polish all as directed by Engineer-in-charge.

Removing of old unserviceable side box from existing table writing and S&F new side made out of 18/19mm thick ISI marked exterior grade pre-laminated particle board.

TABLE DINING 120x 90 Cm (FD/MAP-II/03)

Removing of old unserviceable top from Table Dining 4 pers and S&F new top made of 18mm thick exterior grade, Pre laminated particle board teak faced all as specified and directed by Engineer-in-charge. (Make:- Ecoboard/Action- Tesa / Greenply/ Archid Ply).

Replacement of old unserviceable leg from existing Table Dining and S&F the same size new leg made out of Ist class hard wood teak/seasam toTable 1200x900mm duly french polished all as shown on drawing and as directed.

All as per srl item No. 12.02 here-in-before but long rail.

All as per srl item No.12.02 here-in-before but short rail.

All as per srl item No. 12.02 here-in-before but stiffener of size 100x25mm under the top joining the top long side of top rails.

S & F wooden corners made of Ist class hard wood to legs joining top rails each with 04 Nos of steel screws.

TABLE DINING 06 PERSONS (FD- 239, 273 & 376)

Removing of old unserviceable top from table dining 06 person and S&F new top made of 18mm thick exterior grade particle board duly post-formed (PFT) with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed by Engineer-in-charge. (Make:- Ecoboard/Action- Tesa / Greenply).

Replacement of old unserviceable leg from existing Table dining 06 persons and supply and fixing the same size new leg made out of Ist class hard wood teak/seasam to table dining 06 persons duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per srl item No. 13.02 here-in-before but long rail.

All as per srl item No. 13.02 here-in-before but short rail.

S & F wooden corners made of first class hard wood teak/seasam to legs joining top rails each with 04 Nos of steel screws.

TABLE DINING 08 PERSONS

Removing of old unserviceable top from Table Dining and S&F new top made of 18mm thick exterior grade, ISI marked particle board duly post-formed (PFT) with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed by Engineer-in-charge. (Make:- Ecoboard/Action- Tesa / Greenply).

Replacement of old unserviceable leg from existing Table Dining 08 persons and S&F the same size new leg made out of Ist class hard wood teak/ seasam to Table Dining 08 persons duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per srl item No. 14.02 here-in-before but long rail.

All as per srl item No. 14.02 here-in-before but short rail.

S & F wooden corners made of first class hard wood teak to legs joining top rails each with 04 Nos of steel screws.

TABLE 3' x 2' WITH DRAWER AND WITH OUT DRAWAR WOODEN (FD- 283 & 284)

Removing of old unserviceable top from Table 3'x2' with drawar/ without darwar and S&F new top made of 18mm thick exterior grade, ISI marked particle board duly post-formed (PFT) with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed by Engineer-in-charge. (Make:- Ecoboard/Action- Tesa / Greenply).

Replacement of old unserviceable leg from existing Table 3'x2' with drawer/ without darwar and S&F the same size new leg made out of Ist class hard wood teak /seasam to table 3'x2' with drawer wooden duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per srl item No. 15.02 here-in-before but long rail.

All as per srl item No.15.02 here-in-before but short rail.

All as per srl item No. 15.02 here-in-before but stiffener of Table 3' x 2' with drawer and with out darwar.

Replacement of old unserviceable drawer with new drawer of same size and shape to Table 3'x2' with drawer wooden including CP knob and french polish all as shown on drawing.

S & F wooden corners made of first class hard wood teak/seasam to legs joining top rails each with 04 nos of steel screws.

STOOL DRESSING CUSHIONED (FD/E6/MAP/14)

Removing the complete old and unserviceable seat from stool dressing cushioned and S&F of new seat made of 32 density,75mm thick foam cushion duly uphostered with leatherite including bottom plywood 12 mm thick commercial . All as per existing drawing and as directed. (leatherite shall not be less than Rs 250/- per meter).

Replacement of old unserviceable leg from existing stool and S&F the same size new leg made out of Ist class hard wood teak/seasam to stool dressing duly french polished all as shown on drawing and as directed.

All as per item No. 16.02 here in before but stiffners.

All as per item No. 16.02 here in before but front/side rail.

S & F wooden corners made of first class hard wood teak to legs joining top rails each with 04 Nos of steel screws.

T V TROLLEY (FD/E6/MAP/04)

Removing of old broken glass shutters from TV trolley and S&F of new 05mm thick glass shutters duly fixed with stainless steel fitting for fixing of glass shutters including magnetic catcher to existing TV trolley. The size of the glass shall be as per existing TV trolley or as directed.

Removing of broken swivel type castors wheel from bottom of TV trolley and S&F of new 50 mm dia swivel type castors wheel to TV trolley all as specified and directed. (Each set contain 04 dual wheels )

Removing of old unservicable/broken top of TV Trolley and S&F of new top made of 18 mm thick teak faced exterior grade pre-laminated particle board all as per shape and size as shown on drawing and as directed. (Make:- Ecoboard/Action- Tesa / Greenply).

All as per srl item No. 17.03 here-in-before but side.

All as per srl item No. 17.03 here-in-before but back.

Replacement of telesposic channel with new one as size avilable

BIN LINEN MULTIPURPOSE (FD/E6/MAP/09)

Removing of old unserviceable top from Bin linen multipurpose and S&F new top made out of 18mm thick exterior grade pre-laminated particle board teak faced with 04mm thick teak wood beading duly polished all-around the top of side board all as shown on drawing and as directed. (Make:- Ecoboard/Action- Tesa / Greenply).

All as per srl item No. 18.01 here-in-before but bottom of Bin linen with seesom legs & Frame.

All as per srl item No. 18.01 here-in-before but door shutter.

All as per srl item No. 18.01 here-in-before but side.

All as per srl item No. 18.01 here-in-before but shelf.

All as per srl item No. 18.01 here-in-before but vertical partition.

All as per srl item No.18.01 here-in-before but drawer.

Removing of old unserviceable hinges and S&F of new hinges to Bin linen as per size and design shown on drg complete all as directed.

Removing of old broken handle and S&F of new CP steel handle to Bin linen as per shown on drg and as directed.

Removing of old magnetic catcher and S&F of new magnetic catcher to Bin linen as per size and design shown on drg.

Removing of old unserviceable back pre laminated bd of Bin linen multipupose and S&F the new back partical pre laminated board of same size made out of 12mm thick all as shown in drawing and as directed.

Removing of old unserviceable legs with frame from Bin linen and S&F new legs with frame of size (40x25x100mm) made out of Ist class hard wood teak/seasam and duly french polished irrespective of all as shown on drawing and as directed.

BOOK CASE (FD-237& FD/E6/MAP/)

Removing of old unserviceable top from Book case and S&F new top made out of 18/19mm thick commercial pre-laminated particle board teak faced with 04mm thick teak wood beading all-around the top of side board all as shown on drawing and as directed. (Make:- Archid/Action- Tesa / Greenply).

Removing of old unserviceable legs with frame from Book case and S&F new legs with frame of size (40x25x100mm) made out of Ist class hard wood teak/seasam and duly french polished all as shown on drawing and as directed.

Removing of old unserviceable back ply of Book case and s&f the new back ply of same size made out of 06mm thick commercial plywood (ISI marked) all as shown in drawing and as directed.

All as per srl item No.19.02 here-in-before but bottom.

All as per srl item No.19.02 here-in-before but shelf.

All as per srl item No.19.02 here-in-before but side.

All as per srl item No.19.02 here-in-before but door with piano type hinges.

TABLE DRESSING LADIES WITH MIRROR (FD-32 (M) 251)

Removing of old unserviceable looking mirror from table dressing ladies with frame and S&F new 05mm thick looking mirror of same size duly fixed in new frame of teak wood and duly french polished all as shown on drawing. (Make:- Modi-guard/Saint-Gobain/Swastik).

Removing old broken/unserviceable knob from table dressing ladies and S&F new 40 mm size knob as per shape and size shown in drawing and as directed.

Removing old broken/unserviceable sliding glass from Table dressing ladies and S&F new 05mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as specified and directed.

Removing of old unserviceable legs with frame from Table dressing ladies and S&F new legs with frame of size (40x25x150mm) made out of Ist class hard wood teak as shown on drawing and as directed.

All as per srl item No.20.02 here-in-before but drawar.

TABLE DRESSING GENTS WITH MIRROR (FD-31(M) & 230)

Removing of old unserviceable looking mirror with frame from table dressing gents and S&F new 05mm thick looking mirror of same size duly fixed in new frame of teak wood and with two Nos of MS hanging clips with 03 holes to fix on wall and duly french polished all as shown on drawing. (Make:- Modi-guard/Saint-Gobain/Swastik).

Removing old broken/unserviceable box complete with drawer of table dressing gents and S&F new box with two Nos of drawers with CP brass knobs and made out of 18mm thick exterior grade pre-laminated particle board teak faced, 12mm thick commercial plywood at back and having 04mm thick teak wood beading wherever required to the box and duly french polished all as shown on drawing and as directed. (Make:- Archid Action- Tesa / Greenply).

Removing old broken/unserviceable drawer and S&F new drawer made out of 18mm thick exterior grade pre-laminated particle board teak faced with 04mm thick teak wood beading wherever required to the drawer all as shown on drawing and as directed. (Make:- Archid/Action- Tesa / Greenply).

Removing old broken/unserviceable knob from Table dressing gents and S&F new 40 mm size CP brass knob as per sample, shape and size shown in drawing complete all as specified and directed.

TABLE DRESSING GENTS WITH MIRROR MAP (FD/E6/MAP/16)

Removing of old unserviceable looking mirror with frame from table dressing gents and S&F new 05mm thick looking mirror of same size duly fixed in new frame of teak wood and with two Nos of MS hanging clips with 03 holes to fix on wall and duly french polished all as shown on drawing. (Make:- Modi-guard/Saint-Gobain/Swastik).

Removing old broken/unserviceable box complete of table dressing gents and S&F new box with two Nos of 5mm glass shelf with of 18mm thick exterior grade pre laminated MDF board . teak faced 12mm thick commercial plywood at back and having 04mm thick teak wood beading wherever required to the box and two nos glass 5mm thick shelf in box and duly french polished all as shown on drawing and as directed. (Make:- Archid /Action- Tesa / Greenply).

STOOL DRESSING CB FD-282

Removing old broken short/long top rail of stool dressing and S&F new side short/long top rail of Ist class hard wood teak wood as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed.

All as per srl No 23.01 here in before legs.

All as per srl No 23.01 here in before stiffiner.

HAT STAND WITH MIRROR (FD-233 & 362)

Removing old broken/unserviceable teak plywood from front frame of hat stand and S&F new 04mm thick OSTF commercial plywood as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed. (Make :- Greenply/Century/Duro)

Removing old unserviceable plywood from back side of hat stand and S&F new 04mm thick commercial plywood as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed. (Make :- Greenply/Archid/Duro)

Removing of old/broken looking mirror from hat stand and S&F new 05mm thick looking mirror of same size and fixed in position with teak wood beading all around complete all as shown on drawing (Make:- Modi-guard/Saint-Gobain/Swastik).

Removing old broken beading from hat stand and S&F new 06x35mm thick teak wood beading all as per drawing and directed.

Removing old broken/unserviceable wooden battens from hat stand and S&F new teak wood wooden battens as per shape and size shown in drawing and as directed.

Removing of old unserviceable Aluminium pegs from Hat stand and S&F new Aluminum pegs of size 120x75mm (overall) to Hat stand all as per drg.

TABLE DRESSING LADIES WITH STOOL (FD/E6/MAP-II/07)

Removing old unserviceable drawer of table dressing ladies and S&F new drawer made out of 18mm thick exterior grade pre-laminated particle board teak faced with 04mm thick teak wood beading wherever required to the drawer all as shown on drawing and as directed. (Make:- Archid/Action- tesa / greenply).

All as per srl No 25.01 here in before but side.

All as per srl No 25.01 here in before but door shutter.

All as per srl No 25.01 here in before but looking mirror S&F of new mirror of same size. Make modi guard/Atul/swastik.

Removing old unserviceable handle of table dressing ladies S&F of new steel handle/ knob as per drg and direction.

BED NEWAR (FD-245)

Removing of old unserviseable plytop from Bed Newar and S&F new top of same size of 12mm thick commercial ply wood (ISI marked) , BWR grade of size 6.5'x3'over Bed with screws complete all as shown on drawing and as directed. (Make Archid / Duro/ greenply.

Removing of old unserviceable/ broken long rail from Bed Newar and S&F of new long rail as per of suitable length and made out of teakwood/ seesam with rounded edges and fixing the same in position all as shown on drawing and as directed.

All as per srl item No. 26.02 here-in-before but short rail as per size of suitable length to Bed Newar.

All as per srl item No. 26.02 here-in-before but stiffener as per size of suitable length to Bed Newar.

Removing of old unserviceable plywood from the existing head rest of Bed Newar and S & F new OSTF plywood 04mm thick ISI marked, BWR grade to both sides of head rest including half round teak wood beading all around as per shape and size shown in drawing and fixed with nails including french polishing to ply & beading complete all as specified and directed.

All as per srl item No. 26.05 here-in-before but from foot rest.

Removing of old unserviceable head rest from Bed Newar and S&F new head rest made out of Ist class hard wood teak including provision of 04 mm thick OSTF plywood including teak wood beading half round as per shape and size shown in drawing and fixed with nails including french polishing to ply & beading complete all as specified and directed.

All as per item No. 26.07 here-in-before but foot rest.

S&F new wooden bracket/corners of suitable size to Bed Newar with steel screws all as shown on drawing and as directed.

RECANNING TO DIFFERENT TYPE OF CHAIR :Recanning of wooden chair of different that is chair dinning, chair easy, chair writing stool cb Etc size with 02mm wide cane having 03mm wide plastic cane border in godraj pattern all as shown on drg. Make shah/ aryan & premier.

Painting and polishing :Material and labour for complete removing/scrubbing the entire old polished surfaces by gridining of the following items with grinding machine, including preparation of old wooden surfaces by applying seina/burnt seina uniformally and filing of cavities with putty/filler and applying two coats french polish with as directed in order to obtain glossy finish to the Bed ply top (FD-246 & 247) to the entire satisfaction of Engr-in-Charge and all as directed.

All same as Ser No 28.00 but Book case (FD-237)

All same as Ser No 28.00 but Chair Easy (FD-229)

All same as Ser No 28.00 but Chair Dining (FD-228 & 279)

All same as Ser No 28.00 but Chair Dining (JCOs/ORs) (FD/MAP-II/05)

All same as Ser No 28.00 but Chair Writing (FD-250 & 280)

All same as Ser No 28.00 but Hat stand with Mirror (FD-233)

All same as Ser No 28.00 but Side board (FD-241& FD/E6/MAP/)

All same as Ser No 28.00 but Stool dressing cushioned and CB (FD/E6/MAP/14 FD 252)

All same as Ser No 28.00 but Table dining 120x90cm (FD/MAP-II/03)

All same as Ser No 28.00 but Table dining 06 person (FD-273, 239 & 376)

All same as Ser No 28.00 but Table dining 08 person (FD-273, 239 & 376)

All same as Ser No 28.00 but Table peg (FD- 277, 236 & 384)

All same as Ser No 28.00 but Table centre ( FD-274 & 235)

All same as Ser No 28.00 but Table 3' x 2' with drawer wooden and w/o drawer wooden (FD-283 & 284)

All same as Ser No 28.00 but Table dressing gents with mirror (FD-31(M) & 230 FD /E6/MAP/16)

All same as Ser No 28.00 but Table dressing ladies with mirror (FD-32(M) & 251& FD/E6/MAP-II/07)

All same as Ser No 28.00 but Table writing (FD-35(M) 249& 275)

All same as Ser No 28.00 but Teapoy Wooden (FD-232 & 278)

All same as Ser No 28.00 but Bin linen multipurpose (FD/E6/MAP/07)

All same as Ser No 28.00 but Table bed side (FD-248/276)

All same as Ser No 28.00 but Trolley for TV (FD/E6/MAP/)

All same as Ser No 28.00 but Bed Newar (FD/)

Anil Kumar

SMS Enterprises

RK STEEL FABRICATORs

M/S NEHAL ENTERPRISES