REPAIR AND MAINTENANCE OF OLD RCC, GI, CI PIPE LINE OF VARIOUS SIZE AND CONNECTED ITEMS OF OTM/MD ACCN AREA II INCLUDING CERTAIN MAINT WORKS UNDER GE SAUGOR

Amount

Excavation in trenches in hard/dense soil not exc 1.5m wide & not exc 1.5 deep and getting out in hard/dense soil complete all as per specified and directed

Removing excavated material outside MD not exc 50m and depositing where directed at a level in n.exc 1.5m above the starting point in soil complete all as per specified and directed

Returning filling in including spreading , levelling watering and well ramming in layers not exceeding 25cm complete all as per specified and directed

Supply and laying GI tubing ,medium grade galvanised with all fittings specials such as bend, elbows,tees, short pieces connection, back nuts, diminishig pieces, caps, plugs and unions etc laid in trenches or ceiling of including taking out the following sizes (Note: Excavation and earth work shall be measured and paid separately):-

15 mm dia bore

20mm dia bore

25mm dia bore

40mm dia bore

50mm dia bore

80mm dia bore

S&F in replacement gun metal globe valve with iron wheel, screwed both ends for iron pipes approved complete all as specified and directed

15 mm dia

20mm dia

25 mm dia

40 mm dia

50 mm dia

S&F in replacement sluice valve of 150 mm dia CI body ISI marked class PN 1.6 heavy duty flanged ends cast iron wheel with Brass spindle (ISI marked) conforming to IS : 14786 – 2000, short body all as specified including nuts ,bolt, washers and gasket complete all as directed. Note:- Quoated rate shall be deemed to included for making good the damaged valve chamber

Supply, laying, connecting, jointing and testing Centrifugally cast ( Spun ) Ductile iron Pressure pipe ISI Marked confirming to IS-8329-2000 ( Reaffirmed -2005 Edition 4.1 ) of the following sizes with socket spigot ends, suitable for "Push on Joints ( Tyton Joint )" each standard working lengths supplied with rubber gaskets duly ISI marked for water supply, Class K-7with socket with cement mortar lining inside and metallic Zinc coating with finishing layer of bituminous paint on outside the pipe with out polythylene sleeves but including "Push on Joint" supplied with ISI Marked EPDM rubber gasket conforming to IS-5382-1985 ( reaffirmed-2003 ) laid in trenches including taking up RCC water mains complete all as specified and directed:-

100 mm bore

150.mm bore

S&F cast iron bends (any radius and angle) tappers any type (straight, bend, increasing, decreasing or double socket) Tee, pieces single branch, “ Y” junction, double branch, cross ( all socket or socket spigot) collars, caps, caps & plugs of the size upto 450mm dia complete all as specified and directed.

Supply and lay connecting, jointing and testing of Ductile iron pipe fittings ( Specials ) heavy duty for any type ( flanged / socketed ) pipes such as, bends ( any type radius, and angle ), tapers, any type straight bend, increasing, decreasing or double socket etc. Tee pieces, ring branch, Y junction, double branch, cross ( all socket or socket and spigot ), collars, caps and plugs, adapters etc. of any size radius and length conforming to IS 9523 / 2000 specifications with external bitumen coating and internal cement mortor lining and metallic zinc coating of size upto 150 mm bore complete all as per specified and directed.

M&L for the spigot and socketed CI pipe run lead joint for the following sizes complete for repairs to leakage/repairs by using JCB/Poklane arrange sufficient manpower to arrest leakage/brakedown continue shift wise including taking taking down and relaying all as specified and directed by Engineer-in-charge (Note : Earth Wrok/PCC & CI/DI Specials shall be measured and paid separately under respective items.

80 mm bore

100 mm bore

150 mm bore

200 mm bore

M&L for cutting of bituminous Road/floor/plinth protection for laying pipe not exceeding 1.5mm and 1.5 depth including refiling with excavated material and watering well ramming/compecting and making good with PCC 100 mm thick complete all as specified and directred by Engg-in-charge Note: PCC shall be measured & paid separately

M&L for PCC 1:2:4, type B1 (using 20 mm graded stone aggregates) as in filling and making good distrubed surface complete all as specified and directed

Removal of detoriated valve chamber cover and providing with new MS frame work made of 25 x25 x 3mm angle iron complete and top cover made out of 3.15 mm hick MS sheet duly hinged with frame including grouting / fixing into wall chamber and painting with two coats of enamell paint over a coat of red oxide and locking arrangement , lifting hook, etc., complete all as specified and directed

M&L for repair of valve chambers by preparation of bricks surface including rendering 10mm thick in CM(1:4) of fair face of brick work complete all as specified and directed .

M&L for construction of brick masonary Valve chamber chamber of 1200mmx 1200mm x 1200mm size (inside) for sluice valve with CI wheel valve with bricks of subclass B in cement mortar 1 :4 (1 cement : 4 fine sand), 12mm thick, Inside plastering in cemtn mortar 1:4 finished with a floating coat of neat cemtne, foundation concreate in 1:4 :8 type D2 (1 cement : 4 fine sand : 8 graded stone aggregate 40mm nominal size) and with angle iron frame of size 40x40x5mm & 3mm thick MS Sheet cover, with locking arrangement including necessary excavation & earth work complete all as specified and directed

All as per Srl item No. 15.00 here in before but of size 1000mmx1000mmxx1000mm

All as per Srl item No. 15.00 here in before but of size 600mmX600mmX600mm

All as per Srl item No. 15.00 here in before but of size 900mmX900mmX900mm

Supply only following items:-

CI Giffy Mechanical joint collar coupling suitable for CI/DI 80 mm dia pipe line

All as per Srl item No. 19.01 but 100 mm dia pipe line

All as per Srl item No. 19.01 but 150 mm dia pipe line

All as per Srl item No.19.01 but 200 mm dia pipe line

All as per Srl item No.19.01 but 250 mm dia pipe line

All as per Srl item No.19.01 but 300 mm dia pipe line

All as per Srl item No.19.01 but 350 mm dia pipe line

All as per Srl item No.19.01 but 400 mm dia pipe line

All as per Srl item No.19.01 but 450 mm dia pipe line

Die set suitable for 15mm,20mm,25mm GI pipe threading purpose as per sample. Make: Taparia,Venus

GI Plug suitable for 15 mm dia (inner/Outer threaded) as per sample

All as per Srl item No. 19.11 here in before but 20 mm dia

All as per Srl item No. 19.11 here in before but 25 mm dia

All as per Srl item No. 19.11 here in before but 50 mm dia

Gun metal Ball type valve suitable for 15 mm dia inner threaded with iron handle

All as per Srl item No. 19.15 here in before but 20 mm dia

MS flat not less than 80 mm width and 5 mm thick clamp split type along with bolt,nut with washer including 15 mm dia socket duly welded top of the clamp suitable for 50 mm dia

MS flat not less than 80 mm width and 5 mm thick clamp split type along with bolt,nut with washer including 25 mm dia socket duly welded top of the clamp suitable for 80 mm dia

MS flat not less than 80 mm width and 5 mm thick clamp along with bolt,nut with washer including 25 mm dia socket duly welded top of the clamp suitable for 100 mm dia

MS flat not less than 80 mm width and 5 mm thick clamp along with bolt,nut with washer including 25 mm dia socket duly welded top of the clamp suitable for 150 mm dia

MS flat not less than 80 mm width and 5 mm thick clamp along with bolt,nut with washer including 25 mm dia socket duly welded top of the clamp suitable for 200 mm dia

MS flat not less than 80 mm width and 5 mm thick clamp along with bolt,nut with washer including 25 mm dia socket duly welded top of the clamp suitable for 250 mm dia

PVC Bip cock suitable for 15 mm dia bore pipe Make: Leader/Prayag/waterman

Supply only calcium based granular high strength disinfectant chlorinating chemical for treatment of Drinking water complete all as directed by Engineer-in-Charge. Make: Aquafit , Declibac approved by E-in-C Branch. Note:-(i) Brand name, Batch no and complete particulars of manufacturer should be printed on the container/packing complete all as specified and directed. (ii) Necessary test certificate shall be provided from authorized laboratory complete all as specified and directedNecessary test certificate shall be provided from authorized laboratory complete all as specified and directed (iii) Material shall be ordered one month in advance by the department

Taking out the existing DOL starter, 415V, 3 Ph, 50 Hz from panel suitable for up to 5 HP Capacity motor , cleaning the electronic parts from inside, refixing the OLR, Contactor, NVC and SPP etc of the following capacity motor complete all as specified and directed by the Engineer-in-charge NOTE : Quoted rate deemed to include to replacement of spares and making serviceable condition

All as per item Srl item No. 22 here in before for suitable for 7.5 HP Motor

Taking out the existing Star-delta starter suitable for 10 HP Capacity motor from panel, cleaning the electrnic parts from inside, refixing the OLR, Contactor, NVC,and SPP connecting link wires etc of the following capacity motor complete all as specified and directed by the Engineer-in-charge NOTE : Quoted rate deemed to include to replacement of spares and making serviceable condition

All as per Srl item No.22 here in before for suitable for 12.5 HP Motor

All as per Srl item No.22 here in before for suitable for 15/20 HP Motor

All as per Srl item No.22 here in before for suitable for 30/40 HP Motor

All as per Srl item No.22 here in before for suitable for 50HP Motor

AIR CONDITIONER (SPLIT/WINDOW/WALK-IN-COOLER)

Carry out day to day complaint rectification and periodical service maintenance as per manual recommendation at Area I & Area II like testing of gas leakege from line any capacity, replacement of defective any capacity of capacitor/Condensor, any size of Copper tube alongwith insulation pipe, drain out pipe, Cooling fan & cooling fan motor and cooling coil ,compressor, air filter, swing motor, over load relay, PVC grill, PCB circuit board along with remote control, Condensor motor & fan blade , industrial metal plug top and bottom, Plug nut, Suction pipe, Charging Gas, Testing of gas leakeage using nitrazen gas, Cleaning of the Filters, checking control Wiring , etc., complete all as directed by the Engineer-in-Charge Note: (i) . Replacement of Spares and fitting shall be measured and paid separately.(ii) If required shifting of Split /Window AC shall be measured and paid separtely. (iii). Petty stores such as insulation tape, screws, small pieces of wires,plug top etc shall be provided by the Contractor without any extra cost to the department (iv). AC Mechanic along with Helper so detailed by the contractor will report to MES complaint cell at 08.45 Hrs morning to receive complaints(Complaint slip provided by the contractor) from department and complaint should be rectified with in a same day. (v). Rate included with transport vehicle provided by the contractor to attending the complaints Area I&II .(vi). Attending the complaints not less than min three complaints per day (vii) Spare parts shall be measured and paid separately there rate above Rs. 100/-.

Supply only compressor suitable for window/Split/walk in cooler AC of capacity 1.5 Ton. Make: GODREJ/L&T/BLUE STAR/WHIRLPOOL/VOLTAS

Supply only compressor suitable for window/Split AC of capacity 2.0 Ton. Make: GODREJ/L&T/BLUE STAR/WHIRLPOOL/VOLTAS

Supply only compressor Suitable for Split AC of capacity 3.0 Ton. Make: GODREJ/L&T/BLUE STAR/WHIRLPOOL/VOLTAS

Supply only starting capacitor of capacity 80/100 MFD Make:- Universal/Sarada/Usha/Asian or equivalent make as approved by GE

Supply only starting capacitor of capacity 100/120 MFD Make:- Universal/Sarada/Usha/Asian or equivalent make as approved by GE

Supply only starting capacitor of capacity 120/140 MFD Make:- Universal/Sarada/Usha/Asian or equivalent make as approved by GE

Supply only starting capacitor of capacity 160/180 MFD Make:- Universal/Sarada/Usha/Asian or equivalent make as approved by GE

Supply only condenser capacity of 5/6 MFD Make:- Universal/Sarada/Usha/Asian or equivalent make as approved by GE

Supply only condenser capacity of 10 MFD Make:- Universal/Sarada/Usha/Asian or equivalent make as approved by GE

Supply only condenser capacity of 25 MFD Make:- Universal/Sarada/Usha/Asian or equivalent make as approved by GE

Supply only condenser capacity of 36 MFD Make:- Universal/Sarada/Usha/Asian or equivalent make as approved by GE

Supply only condenser capacity of 45 MFD Make:- Universal/Sarada/Usha/Asian or equivalent make as approved by GE

Supply only condenser capacity of 50 MFD Make:- Universal/Sarada/Usha/Asian or equivalent make as approved by GE

Supply only condenser capacity of 55 MFD Make:- Universal/Sarada/Usha/Asian or equivalent make as approved by GE

Supply only condenser capacity of 60 MFD Make:- Universal/Sarada/Usha/Asian or equivalent make as approved by GE

Supply only cooling coil suitable for 1.5 Ton capacity Window AC

Supply only cooling coil suitable for 2.0Ton capacity Window AC

Supply only cooling coil suitable for 1.5 Ton capacity Split AC

Supply only cooling coil suitable for 2.0 Ton capacity Split AC

Supply only cooling coil suitable for 3.0 Ton capacity Split AC

Supply only swing motor suitable for 1.5 Ton capacity Window type Air Conditioner as per existing sample

Supply only swing motor suitable for 2.0 Ton capacity Window type Air Conditioner as per existing sample

Supply only swing motor suitable for 1.5 Ton capacity Split type Air Conditioner as per existing sample

swing motor suitable for 2.0 Ton capacity Split type Air Conditioner as per existing sample

Supply only swing motor suitable for 3.0 Ton capacity Split type Air Conditioner as per existing sample

Supply only over load relay suitable for 1.5/2.0 Ton Window type AC

Supply only over load relay suitable for 1.5/2.0 Ton Split type AC

Supply only over load relay suitable for 3.0 Ton Split type AC

Supply only PVC front gril suitable for Window type AC of any Make suitable for 1.5/2.0Ton window AC

Supply only electric blower motor suitable for 1.5 Ton capacity Window type AC

All as perSrl item No. 27.31 here in before but suitable for 2.0 Ton capacity Window type AC

All as per Srl item No.27.31 here in before but suitable for 1.5 Ton Split AC (Evaporator/condenser)

All as per Srl item No. 27.31 here in before but suitable for 2.0 Ton Split AC (Evaporator/condenser)

All as per Srl item No. 27.31 here in before but suitable for 3.0 Ton Split AC (Evaporator/condenser)

Blower motor fan blade suitable for 1.5/2.0 Window type AC

Supply only Blower motor fan blade suitable for 1.5/2.0 Split type AC

Supply only blower motor fan blade suitable for 3.0 Split type AC

Supply only condenser motor with fan blade suitable for 1.5 Ton capacity Window type AC

Supply only condenser motor with fan blade suitable for 2.0Ton capacity Window type AC

Supply only condenser motor with fan blade suitable for 1.5 Ton capacity Split type AC

Supply only condenser motor with fan blade suitable for 2.0 Suitable for Split type AC

Supply only condenser motor with fan blade suitable for 3.0 Suitable for Split type AC

Supply only thermostat switch with knob suitable for AC of any capacity.

Air Filter Suitable for 1.5/2.0/3.0 Ton capacity Window/Split type Air conditioner

Supply only capillary tube length as per existing size suitable for 1.5/2.0/3.0 Ton capacity Air conditioner

Supply only PCB Circuit with remote control suitable for any make and capacity of 1.5/2.0 Ton Window type AC

Supply only PCB Circuit with remote control suitable for any make and capacity of 1.5/2.0/3.0 split type capacity Air Conditioner .

Supply only PCB Circuit with remote control suitable for any make and capacity of 1.5/2.0 Split type capacity inverter type Air Conditioner

Supply only metal top with bottom suitable for 16 Amps capacity 1.5/2.0/3.0 Ton capacity Air conditioner Make: Anchor/Havells/Philips/polycab and as per site requirement.

Supply only suction/Drain out pipe suitable for 1.5/2.0/3.0 ton capacity Suitable for Air conditioner as per sample complete

Supply only insulation of size 1/4, 3/8 for Split AC complete as per existing sample

Supply only insulation of size 1/2 5/8 for Split AC complete as per existing sample

Supply only rubber bush suitable for 1.5/2.0/3.0 ton capacity Suitable for Air conditioner as per existing sample

Supply only copper tube of size 1/4 3/8 suitable for any type and any capacity Air conditioner as per existing sample

Supply only copper tube of size 1/2 5/8 suitable for any type and any capacity Air conditioner

Supply only plug nut of size 1/4 3/8 suitable for any type and any capacity Air conditioner

Supply only plug nut of size 1/2 5/8 suitable for any type and any capacity Air conditioner

Supply only out door unit stand alongwith Bolt,nut with washers as per sample or existing size suitable for Split AC Outdoor unit capacity of 1.5/2.0/3.0 Ton

Supply only refrigerent Gas R-22

Supply only refrigerent Gas R-410 a

Supply only refrigerent Gas R-134(a)

Supply only NRV Suitable for Any capacity& any Make Air conditioner

Supply only remote cell suitable for Air Conditioner remote Controller

Supply only universal type Remote Control suitable any model,any capacity of Split/Window type Air Conditioner

WATER COOLER

Carry out day to day rectification any Make,any capacity of Water Cooler complaints at Area I & Area II like testing of gas leakege from line any capacity, replacement of defective any capacity of capacitor/Condensor, any size of Copper tube , drain out pipe, Cooling fan & cooling fan motor and cooling coil ,compressor, over load relay, GI grill, , industrial metal plug top and bottom, Suction pipe etc., complete all as directed by the Engineer-in-Charge Note: (i) . Replacement of Spares and fitting shall be measured and paid separately.(ii) If required shifting of Water cooler shall be measured and paid separtely. (iii). Petty stores such as insulation tape, screws, small pieces of wires,plug top etc shall be provided by the Contractor without any extra cost to the department (iv). AC Mechanic along with Helper so detailed by the contractor will report to MES complaint cell at 08.45 Hrs morning to receive complaints(Complaint slip provided by the contractor) from department and complaint should be rectified with in a same day. (v). Rate included with transport vehicle provided by the contractor to attending the complaints Area I&II .(vi). Attending the complaints not less than min three complaints per day (vii) Spare parts shall be measured and paid separately there rate above Rs. 100/-

Supply only compressor suitable for 60/120 Water cooler capacity

Supply only compressor suitable for 40/80 Water cooler capacity

Supply only compressor suitable for 150/150 Water cooler capacity

Supply only compressor suitable for 40/40Water cooler capacity

Supply only compressor suitable for 150/180 Water cooler capacity

Supply only starting Capacitor suitable for compressor of water cooler 150/180,60/120 and 40/80 capacity

Supply only running Capacitor suitable for compressor of water cooler 150/180,60/120 and 40/80 capacity

Supply only starting relay current type suitable for compressor of water cooler 150/180,60/120 and 40/80 capacity

over load Protector suitable for compressor of water cooler 150/180,60/120 and 40/80 capacity

Supply only thermostat switch with knob suitable for compressor of water cooler 150/180,60/120 and 40/80 capacity

Supply only PVC float valve assy alongwith ball with complete accessories for water cooler any capacity of size 15 mm dia . Make: Prayag/Waterman/Leader or equalvent

Supply only self closing water tap 15 mm dia chromium plated inner/outer thread for water cooler 150/180,60/120 and 40/80 capacity as per sample Make: Waterman/Leader

Air Filter Suitable for water cooler 150/180,60/120 and 40/80 capacity

Supply only capillary tube of suitable length as per existing size for water cooler 150/180,60/120 and 40/80 capacity

Supply only PVC Drain out pipe as per sample

Supply only PVC Flexible extension pipe 15 mm dia , Make Prayag/V Guard/Leader

Supply only cooling coil suitable for 150/180,60/120 and 40/80 capacity Water Cooler

Supply only cooling coil Motor suitable for 150/180,60/120 and 40/80 capacity Water Cooler

Supply only cooling coil Motor fan blade suitable for 150/180,60/120 and 40/80 capacity Water Cooler

Supply only PVC insulated Copper conductor and PVC over all covered cord cable copper conductor 3 core of size 4 Sqmm Make- Plaza/Havells/ Finolex. Make- Plaza/Havells/ Finolex.

Supply only PVC insulated Copper conductor and PVC over all covered cord cable copper conductor 3 core of size 2.5 Sqmm Make- Plaza/Havells/ Finolex.

Supply only sheet metal enclosures with flush mounted type plug and socket with 240 V SP MCB 20 amps capacity Make: ABB/Legrand/Havells or Equivalent

M&L for water cooler Stainless storage tank brazing/welding of damage/crack portion and making good condition including replacement of Bolt,nut with washers and testing complete

REFRIGERATOR

Carry out day to day rectification any Make,any capacity of Refrigerator complaints at Area I & Area II like testing of gas leakege from line any capacity, replacement of defective any capacity of capacitor/Condensor, any size of Copper tube , drain out pipe, Cooling fan & cooling fan motor and cooling coil ,compressor, over load relay, Vegitable tray, magnetic gasket, freezer, PVC Plug top and bottom, etc., complete all as directed by the Engineer-in-Charge Note: (i) . Replacement of Spares and fitting shall be measured and paid separately.(ii) If required shifting of Refrigerator shall be measured and paid separtely. (iii). Petty stores such as insulation tape, screws, small pieces of wires,plug top etc shall be provided by the Contractor without any extra cost to the department (iv). AC Mechanic along with Helper so detailed by the contractor will report to MES complaint cell at 08.45 Hrs morning to receive complaints(Complaint slip provided by the contractor) from department and complaint should be rectified with in a same day. (v). Rate included with transport vehicle provided by the contractor to attending the complaints Area I&II .(vi). Attending the complaints not less than min three complaints per day (vii) Spare parts shall be measured and paid separately there rate above Rs. 100/-

Supply only compressor suitable for 195to 210 Ltrs capacity Refrigerator

Supply only compressor suitable for 195to 225 to 250 Ltrs capacity Refrigerator

Supply only compressor suitable for 260 to 310 Ltrs capacity Refrigerator

Supply only magnetic door gasket suitable for 165 to 200 ltrs capacity Refrigerator as per sample

Supply only magnetic door gasket suitable for 286/320 Ltrs capacity Refigerator as per sample (Double Door)

Supply only freezer suitable for 165 to 200 ltrs capacity Refrigerator

Supply only freezer suitable for 286/310 Ltrs capacity Refigerator

Supply only relay current type and over load protector suitable for compressor complete Make: Ranutrol/Voltas/LG

Supply only thermostat auto defrost type suitable for any make and any capacity Refrigerator

Supply only Air Filter suitable for for any make and any capacity Refrigerator

Supply only capillary tube of suitable length as per existing size for refrigerator any make and any capacity

Supply only vegitable tray with Glass cover as per sample and suitable for refrigertator any type and any make

Supply only PVC Stand for Refigerator capacity any make and any capacity as per sample

Supply only PVC top 16 Amps Suitable for any capacity and any make Refrigerator as per sample

PVC Nylon Roller as per sample

Supply only Condensor Coil suitable for any model and capacity Refrigerator as per sample

Supply only evaporator Coil suitable for any model and capacity Refrigerator as per sample

Supply only expansion valve suitable for any model and capacity Refrigerator as per sample

DEEP FREEZER

Carry out day to day rectification any Make,any capacity of Deep freezer complaints at Area I & Area II like testing of gas leakege from line any capacity, replacement of defective any capacity of capacitor/Condensor, any size of Copper tube , drain out pipe, Cooling fan & cooling fan motor and cooling coil ,compressor, over load relay, magnetic gasket, PVC Plug top and bottom, Door Lock, MS Hings, Trolley Nylon roller alingwith bracket etc complete all as directed by the Engineer-in-Charge Note: (i) . Replacement of Spares and fitting shall be measured and paid separately.(ii) If required shifting of Deep freezer shall be measured and paid separtely. (iii). Petty stores such as insulation tape, screws, small pieces of wires,plug top etc shall be provided by the Contractor without any extra cost to the department (iv). AC Mechanic along with Helper so detailed by the contractor will report to MES complaint cell at 08.45 Hrs morning to receive complaints(Complaint slip provided by the contractor) from department and complaint should be rectified with in a same day. (v). Rate included with transport vehicle provided by the contractor to attending the complaints Area I&II .(vi). Attending the complaints not less than min three complaints per day (vii) Spare parts shall be measured and paid separately there rate above Rs. 100/-

Supply only compressor Suitable for 300 Ltrs capacity Deep freezer

Supply only compressor Suitable for 500 Ltrs capacity Deep freezer

Supply only relay current type and over load protector suitable for compressor

Supply only thermostat auto defrost type suitable for any make and any capacity Deep freezer Make: Danfos/Ind Foss/renutrol or equivalent

Supply only drier filter complete set suitable for any make and any capacity Deep freezer

Supply only indicating lamp (Red and Green) 230V complete suitable for any make and any capacity Deep freezer as per sample complte

Supply only capillary tube of suitable length as per existing size for Deep freezer any make and any capacity

Supply only starting relay suitable for 310/320 ltrs capacity Deep freezer

Supply only condenser motor (Rotary fan) suitable for any type and any capacity deep freezer Make; AUE/Cool Blow/Universal or equivalent

Supply only starting capacitor suitable for Deep freezer suitable for any type and any capacity deep freezer

S&F in replacement out door unit of split type AC of cap. 1.5 Ton with all accessories, testing complete all as specified and directed. Make:-LG/Blue Star/Voltas/Whirlpool /Godrej/ Videocon

S&F in replacement indoor unit of split type AC of cap.1.5 Ton with all accessories, testing complete ,all as specified and directed. Make:-LG/Blue Star/Voltas/Whirlpool /Godrej/ Videocon

S&F in replacement out door unit of split type AC of cap. 2.0 Ton with all accessories, testing complete all as specified and directed. Make:-LG/Blue Star/Voltas/Whirlpool /Godrej/ Videocon

S&F in replacement indoor unit of split type AC of cap. 2.0 Ton with all accessories, testing complete all as specified and directed. Make:-LG/Blue Star/Voltas/Whirlpool /Godrej/ Videocon

DESERT COOLER

Supply only fan motor of capacity 1/6 HP (125 W), 230 V, 50 Hz, SP, AC supply confirming to IS-996/79 (motor only) with mounting accessories Make- Khaitan/Cool Blow/CG/Bajai

Supply only water circulating submesible pump, 1300 RPM, SP, 230V, 50Hz 1.5M head , discharge 7.0 Ltrs/hr Make:indo/summer cool

Supply only filter pad made out of wooden wool suitalbe for Air grills of desert cooler as per existing size

Supply only PVC Flexible hose suitable for desert cooler cooling system

Supply only PVC Fan Blade suitable for 3000/4000/5000/6000 as per sample

Supply only bolt, nut with washers as per sample

Supply only PVC Connector i.e (Elbow, Tee,4 way etc)

Supply only switch 5 Amps

Supply only indication lamp

Supply only voltage stabilizer of capacity 4 KVA with connected accessories complete Make:- V GUARD/VOLTAS/VENUS

Supply only voltage stabilizer of capacity 5 KVA wiring with connected accessories complete. Make:- V GUARD/VOLTAS/VENUS

M&L for sub main wiring with 6 Sqmm (Nominal area) with two runs (Red for phase and Black for neutral) of single core, PVC insulated, FR multistranded, unsheathed, copper conductor cables 1100 V grade drawn through PVC conduits/casing-caping fixed to wall/ceiling etc including 2x 6 sqmm + 2.5 Sqmm earth wire single core, PVC insulated, multistranded, unsheathed, copper conductor green in colour as earth wire and duly connected to earth point including taking down complete as specified and directed.complete all as specified and as directed by Engineer-in charge.

M&L for sub main wiring with 2.5 Sqmm (nominal area), PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 2x2.5Sqmm and 1x2.5 Sqmm Warth wire PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including PVC terminal box fixed with suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light point controlled by one ,one way switches including taking down as specified and directed. complete all as specified and as directed .(Note :- PVC conduits/casing caping and Two runs cables and one run of earth wire will be measured as one length.)

shivansh traders