C/O 01 NO CSC AT MASJID SHARIF BON MOHALLA CHECKI RAJWALI DAMJAN BLOCK VESSU

e/w in excavation in foundation by manual means in trenches for foundation (not exceeding 1.5m in width), depth upto 1.5m inc. disposal of excavated earth upto 1m from cutting edge all kinds of soil.

providing and laying of dry stome solling/rbm inc. all carriages

P/L cement concrete of specified grade excluding the cost of centering & shuttering using M7.5 mix. (1:4:8) using 40mm NSA

P/L cement concrete of specified grade excluding the cost of centering & shuttering using M10 mix. (1:3:6) all work upto plinth level

brickwork with common burnt clay fps(non modular) bricks of class designation 75 in foundation and plinth in CM (1:6) inc. all carriages complete job.

extra for brick work above plinth level upto floor v level

rcc work in beams, suspended floors,roofs having slope upto 15 degree landings,balconies,shelves,chajjas,lintels,bands,plain window sills,stair cases and spiral stair cases upto five level inc. curing but excluding the cost of centering and shuttering finishing and reinforcement with (1:2:4) m15 mix and 20 mm nominal size aggregates

rcc work in beams, suspended floors,roofs having slope upto 15 degree landings,balconies,shelves,chajjas,lintels,bands,plain window sills,stair cases and spiral stair cases upto five level inc. curing but excluding the cost of centering and shuttering finishing and reinforcement with (1:2:4) m15 mix and 20 mm nominal size aggregates

reinforcement for rcc work inc. straightening,cutting,bending,placing in position and binding all complete.tmt bars

cenetering and shuttering inc. propping etc and removal of formwork for roof, slab inside,slab,steps offset,septic tank,soakage pit.

long,short walls and steps

dry RRM with hard stone in foundation and plinth using quarry stones

12 mm thick plaster 1:6 mix

structural steel work in single section fixed with or without connecting plates inc. cutting hoisting, fixing in position and applying a priming coat of approved steel primer al complete for doors vents and windows

P/F of coloured CGI sheets for doors cj

P/L of 40mm thick flooring with 20mm NSA

p/l ceramic glazed floor tiles 300x300mm of first quality confirming to IS 15622 of approved make laid on 20mm thick bed of cement mortar 1:4 inc. pointing the joints with white cement and and matching pigment etc all complete

p/l of ist quality ceramic glazed wall tiles confirming to IS 15622 of approved make I all shades an colours except burgundy, bottle green, black of any size as approved by engineer in charge in skirting risers of steps and dados over 12mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @3.3kg/sqm inc. pointing in white cement mixed with pigment of matching shade complete

carriage of materials by MT

sand aggregates for an avg lead of 20kms by mt(sta)

bricks 20km avg lead (sta)

p/f of wc squatting pan (indian type) wc pan with 100mm dia pvc P trap+ 10 litre low level pvc flushing cistern inc. flush pipe, manually controlled device with all fittings and fixture complete long pattern wc pan of 580x440mm

p/f high density polyethylene water storage loft tank with cover con colour of opaque white or as approved by enginner in charge the rate inc. making necessary holes for inlet, outlet and over flow pipes the base support inc. fittings (water storage tank)

finishing walls with water proofing cement paint of requeird shade two or more coats

P/F of 3 layer PP-R pipes confirming to IS 15801 UV stabilized and anti microbial fusion welded having thermal stability for hot and cold water i) PN-16 pipe 16mm, 20mm OD (SDR 7.4)

P/F door tee 100mm dia pvc type b

P/F of waste disposal pipes 110mm dia type b cj

P/F waste vent pipes of 75mm dia type b cj

P/F PVC cowel over vent pipe of approved quality type b

p/f 100x75 reducer pvc of approved quality

floor traps with 110mm with double chrome plated cover one grated and one closed and all other fittings required of standard quality cj

P/F brass bibcock of approved quality 15mm dia of standard brand

p/f brass angle valve of approved quality

P/F gun metal gate valve of approved quality 20mm nominal bore

add provision for signboard and photograph charges and other foreseen items cj (sta)