Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹91.9 LAccepted-AOC C 89 CECC VILL POST PATHOLI AGRA UP | AGRA | AGRA | UTTAR PRADESH | 283105 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹97.4 L+₹3.3 L (3.53%)Rejected-Finance 1 2 NAGARIA IDGAH AGRA 282001 UP | AGRA | UTTAR PRADESH | 282001 | L2 | Rejected-Finance Being higher bidder | |
| 3 | L3₹1.1 Cr+₹11.7 L (12.4%)Rejected-Finance | L3 | Rejected-Finance Being higher bidder |
Tender Value
₹1.2 Cr
EMD Value
₹1.9 L
Closing Date
14 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE(AF) Agra
HQ CWE (AF) Agra PIN 282008
SPECIAL REPAIR TO CERTAIN OMQs AT NP AREA AT AF STN AGRA
2023_MES_602369_1
80023-03/E8
Open Tender
Civil Works
Item Rate
180 days
GE(AF) ADM AREA
As per Tender Documents
9 documents required · 9 mandatory
₹1,000
GE(AF) ADM AREA AGRA
₹1.9 L
Yes
10 Aug 2023
9 Jun 2023
17 Jul 2023
9 Jun 2023
14 Jul 2023
30 Jun 2023
Amount
M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius, old size built in CM (1:6) including demolition of brick work complete all as specified and directed.
M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 with old size bricks including demolition of old brick work complete all as specified and directed.
Taking down cement plaster on brick or stone or concrete surfaces of wall etc , including raking out joints , hacking for key, scrubbing down with water etc including removing complete all as specified and directed.
M&L for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:4) finished surface shall be even and fair mixed with and including WPC @2% by weight of cement complete all as specified and directed by Engr-in-Charge.
M&L for rendering 10mm thick on concrete surfaces of ceiling with CM (1:4) and finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work n. exc 15 cm in width or girth; including cutting to edges, all mitred and stopped ends, etc. complete all as specified and directed.
M&L for forming square grooves in plaster n. exc. 12 mm deep and n. exc. 15 mm in width on face of wall complete all as specified and directed.
M & L for providing and injecting chemical emulsion for post construction anti termite treatment along the external wall below concrete or masonery apron using chemical emulsion @ 2.25 Ltr per liner meter including drilling and plugging holes etc in apron complete all as specified and directed.
M & L for treatment of soil under existing floors using emulsion @ one liter per liter per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed.
Complete removal of existing treatment of any type/description from ceilings / RCC surfaces etc with mechanical means/grinder including removing complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC content less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new/old surfaces complete all as specified and directed.
Material & Labour for applying two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/liter, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification on internal wall/ceiling surfaces including preparation of new/old plastered surface complete all as specified and directed.
M&L for two coats of white wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.
M&L for preparation of old decorated surfaces of wall including brooming down or by steel wire brushes, scrapping down smoke spot mould, moss and efflorescence, salt area etc on old decorated plastered or unplastered surfaces of walls /ceiling including cornices etc and applying one coat of white wash complete all as specified and directed .
M&L for preparation of old treated wooden surfaces of any description exc. 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old plastered or concrete surfaces of any description and Writing letters or figures ( Block, Roman, Italic or Indian) not exceeding 30 cm high by using synthetic enamel paint complete all as specified and directed.
M&L for scraping out loose mortar/concrete by chiseling/ wire brushing complete and applying rust removing solution (rebaklene solution) to exposed corroded reinforcement and applying a coat of epoxy primer (Nitozink primer from M/s Fosroc or equivalent as approved by GE) as per manufacturer instructions, filling extra depth in RCC structure with micro concrete, providing and fixing of wire mesh of weight 2.5 Kg per Sqm and apply Cement mortor rendering 25 mm average thickness in CM (1:4) mixed with liquid integral water proofing compound (complast 'X' recommended by the manufacture with gunitting machine at a pressure not less than 5 Kg/Sqcm finally rendering 10mm thick plaster in CM (1:4) using liquid integral water proofing compound (complast 'X' 421 i.e. from M/s Fosroc and Nitobound AR from M/s Fosroc or equivalent as approved by GE) in the proportion recommended by the manufacture complete all as specified and directed.
Demolition of cement concrete ( reinforced) of any description in any position not otherwise specially provide for complete all as specified and directed.
M&L RCC 1:2:4 ( Type B 1 ) using 20 mm graded stone aggregate in slabs supported on walls , beams, columns and similar work etc .including removing complete all as specified and as directed.
Use and waste formwork to soffits of suspended slab, slab supported on walls, columns, beams and similar work not exceeding 200 mm thick (Horizontal or sloping) , rough finished surface of complete all as specified and directed
Material and labour for TMT bar 10 mm dia and over cut to length, bent to shape reqd, incl cranking, bending, spirally for hooping, hooking ends and binding with 0.90 mm dia MS wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.
M&L for Vitrified Ceramic tiles joint less 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6, including demolition of existing floor tiles etc including removing complete all as specified and directed.
M&L for coloured non skid ceramic tiles 7 to 8 mm thick joint less (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6, including demolition of existing floor tiles etc including removing complete all as specified and directed.
M&L for glazed ceramic designed coloured tiles 350 x 450 mm x 7 mm thick on vertical surface such as dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:4 including demolition of old tiles including removing complete all as specified and directed.
Taking down chowkats with shutters (without taking down of shutter from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and directed.
Taking down chowkats with shutters (without taking down of shutter from the frames)n. exc 1.50 Sqm each complete all as specified and directed.
Taking down shutter of any description exc 1.00 sqm and n.exc 2.00 Sqm each complete all as specified and directed.
S&F solid PVC door frames of size 50mm x 47mm made out of 5mm plain cover fillet colour PVC sheet reinforced with MS square tube for toilet complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in M.S frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement. Supplying and fixing in the frame at site as in drawing mentioned in SSR Part II complete all as specified and directed..
S&F factory made pre-laminated PVC door frame (Single rebate) wooden finish colour, made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin, having section size of 65mm X 100mm of density 600 kg/cum, frame will be mitred & jointed with self driven self tapping screws and PVC solvent cement or fusion heat welding process all as per manufacturer's specification complete all as directed.
S&F for Factory Made Solid PVC Moulded door Shutter,with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC wooden finish colour sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing mention in SSR Part II complete all as directed.
Supply and fix well-seasoned second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.22mm) complete all as specified and dirrected.
S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete fixed all as specified and directed.
M&L for preparation of new wooden surfaces of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a one coat of pink primer complete all as specified and as directed.
S&F stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc complete all as specified and directed.
S&F Stainless Steel (304 Grade) Finished Floor Door Stopper with stainless steel screws complete all as specified and directed.
S&F 100 mm size butt hinges stainless steel medium weight complete all as specified and directed.
S&F 150mm long aluminum anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 150mm size aluminum anodised alloy handles fabricated type complete all as specified and directed.
S&F 300mm long mild steel, sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed.
S&F in repairs 3mm thick sheet glass , ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane etc complete all as specified and directed.
S&F in repairs 3mm thick Figured glass, pin head type , glazing with oil putty in square n.exc 0.5 sqm in each pane etc complete all as specified and directed.
M & L for providing and fixing factory made extruded aluminum ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminum beeds 20mm size with and complete all as directed.
S&F in repair vitreous china premium/1st quality wash down water closet floor mounted EWC with P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover closed pattern with matching colour flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc and for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC 1 : 2 :4 using 20 mm graded stone aggregate complete in all respect all as specified. Make Cat Part No- Prayag- 4018/4019, Hindware- 55X36X39 or Cera- S1053108.
S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing including taking down existing of any description/size complete in all respect all as specified. Make : Cat Part No- Cera- B1020106 (Sleek Essence Dual Flush) or Hindware- 60001 or Prayag- 508.
S&F health faucet chromium plated brass body with 1.00 metre long flexible tube with wall hook for 15 mm bore GI pipe including making connections and fixed in position complete in all respect as specified. Make : Cat Part No-Prayag-BEA-41, Hindware- F160122 or Cera- F8030301
S&F Corner glass shelf 3 tier assembly consisting of 5.5 mm thick toughen glass shelf with chromium plated bracket guard and railing complete all as specified and directed. Make Cat Part No- Prayag- BEA-48 (Three set), Cera - F5005101/02/03 or Parryware- T6010A1(3 set)
S&F toilet paper holder, superior quality, fancy type, brass chromium plated with wall hook bracket complete all as specified and directed. Make Cat Part No- Prayag- BA-08 Cera- F5007110 or Hindware- CP- F450027
Supply and fix, as in repair, vitreous china wash basin, size 560 x 410 x180 mm, excluding taps, waste chain, plug and porcelain stopper, pillar tap (pillar tap measured and paid seprately) fixing in counter complete all as specified. Make:PRAYAG CAT PART No 4790, Hindware- Oval-10017 or Cera- S2030136
S&F in repair 15mm dia hot and cold centre hole wash hand basin mixer, chromium plated, fancy type complete all as specified and as directed. Make : Cat Part No- Prayag - Frost 7750, Jaquar- SOL 61678 or Plumber NTO 5102.
M & L for 18 to 20mm thick granite (any type) work (table rubbed and polished) as in skirting, dado, steps, pillars, jambs, cooking platform, window cills and like in cement mortar 1:4 including pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone over screed bed 10 mm thick in cement mortar 1 : 4 including moulding of edges complete all as specified and directed.
S&F in repairs for brass chromium plated shower rose 100 mm size round with swivel joint including fixing to 15mm dia steel pipe or union complete all as specified and directed. Make : Cat Part No- Prayag- BOS-32, Jaquar- OHS-1709 or Plumber CP- ITP-2401.
M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, centre knob operated L-bend for head shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed. Make : Cat Part No Prayag- 6575, Jaquar- SOL 6281 or Plumber CP-CRS 3000LB.
S&F for 15 mm Bib taps long body with flange, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm bore and fixed in repair complete all as specified and directed. Make: CAT PART No- PRAYAG- 6509, Jaquar- Con CHR 047 KN or Plumber CP- PST 2104
S&F Stop cock, fancy type, CP with long shank and cup ( concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position completet all as specified. Make: PRAYAG CAT PART No- 6518, Jaquar- CON- 069FTK or Plumber- CRS-2106
S&F Angular Stop Cock with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. Make: PRAYAG CAT PART NO- 6510, Jaquar- CON- 059KN or Plumber CRS-2105
S&F CP soap dish fixed to wall with plugs and screws complete all as directed and specified.
S&F towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and fixed in position complete all as specified. Make: PRAYAG CAT PART No- BA- 10S, Cera- F5002103 or Jaquar- CAN 1111SN.
S&F in new or old position 38 mm bore PVC waste pipe for WHB or sink complete as specified .
S & F PVC connections 15 mm size with PTMT nuts of length 450 m complete all as specified.
S&F Sink Cock with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified. Make: PRAYAG CAT PART No- 6514, Jaquar- CON-349KNM or Plumber- PST-1102
S&F stainless steel single bowl kitchen sink ISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, or fixed in kitchen platform etc.. including 32mm waste pipe, and making good disturbed portion in white cement/m seal as directed. Make : Prayag Cat Part No- 1216 of Overall Size- 460 X 405 X 178mm, Bowl Size - 405 X 354 X 178mm. Make: Jayna Cat Part No- SBF 01 of Over all size 460 X 405 X 200mm, Bowl Size 410 X 352 X 200mm
S&F GI tubes of medium grade with all fitting and fixed complete to walls and ceilings or laid in floors of 15 mm dia including taking down old pipe complete all as specified and directed.
S&F tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm dia including taking down old pipe complete all as specified and directed.
Refixing of old steel tubing with new fittings and connections in new or old position (walls, ceilings, floors, etc) of 15 mm bore complete all as specified and directed.
Refixing of old steel tubing new fittings and connections in new or old position (walls, ceilings, floors, etc) of 20 mm bore complete all as specified.
S&F in repairs steel tank cover with zinc coating of dia 500mm and height 150mm of cut spherical shape and gas welded of spike 2mm dia and 50mm length at 50mm c/c both ways in zig zag motion with 75mm long MS hinges, Hasp and staple of 75mm size fixed to existing PVC water storage tank of any capacity and binded with galvanised, 2 strand steel barbed wire 2.24 mm dia barbed with 2mm barbs at 75 c/c complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate, as in base for PVC tanks complete all as specified and directed.
S&F repairs for 20 mm stop valve, cast iron , screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of 20mm bore of pipe fixed complete all as specified and directed..
S&F fix in repairs triple layer 500 liters rotational moulded polyethylene water storage tanks (cylindrical vertical with threaded lid top) white in colour hoisted and fixed in position including 20 mm polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified in SSR Part-I and directed.
S&F fix in repairs triple layer 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with threaded lid top) white in colour hoisted and fixed in position including 20 mm polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified in SSR Part-I and directed.
M&L in replacement of Cast iron soil, waste and vent pipe, Centrifugal type 100mm bore, spun cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified and directed..
M&L in replacement of Cast iron soil, waste and vent pipe, Centrifugal type 100 mm bore, spun cast in any length, with or without ears, with lead joints, laid in trenches including necessary earth work complete all as specified. and directed..
M&L in replacement of Cast iron branch pieces single Centrifugal type (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, suitable for 100 mm bore pipe, fitted with oval access door jointed with lead joint, complete all as specified and directed.
M&L in replacement of CI Cowl Centrifugal type suitable for 100 mm bore pipe as in repair complete all as specified and directed.
M&L Cast iron bends/ Tee duck foot or hell rest, radius for 100 mm bore pipe, complete all specified and directed.
M&L in replacement of Salt-glazed stoneware gully traps, Centrifugal type of size150x150mm square or round mouthed, type 'P' or 'S' incl CI grating fixed complete all as directed and specified.
S&F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls including etc complete all as specified.
S & F bend suitable for 110mm dia PVC (SWR) pipe including clamps complete all as specified and as directed
S&F in repair 100 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone agg) as in plinth protection paving etc, finished surface even and smooth without using extra cement including demolition of old cement concrete and removal complete all as specified and directed.
M&L for preparation of old treated steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Dismantling of existing roof treatment including tar felt, cement plaster, etc from roof surfaces and cleaning the surface and removing the debris from site complete all as specified and directed.
Demolition of cement concrete (unreinforced ) above ground floors i.e from RCC roof slabs/terrace n exc 15cm thickness etc including removal complete all as specified.
M&L for PCC ( 1:2:4) type B0, using 12.5 mm graded stone agg as in padding in averaging on RCC roof slab or terrace mixed with WPC @ 2% by mix weight of cement including finishing even and smooth with using extra cement etc complete all as specified and directed.
M&L for rendering or screed bed 10 mm thick in CM 1:3 in averaging on RCC roof slab/terrace surfaces mixed with WPC @ 2% by wt of cement including finishing even and smooth without using cement complete all as specified and directed.
M&L for water proofing treatment to roof with APP based polymeric membrane, 3 mm thick (min.) consisting of 90 to 100 micron thick central core of HMHDP film and standard weight of 3.00 kg/sqm reinforced with polyester non woven fabric ( weighing n. less than 160 gm / sqm ) shall be applied over and including applying a coat of hot blown bitumen 85/25 conforming to IS-702 @ 1.20 Kg/Sqm over a coat of bituminous primer @ 0.30 liters/Sqm surface, application of APP modified membrane and joint shall be by torch application. The overlaps shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction complete all as specified & directed.
Demolition of PCC/ Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) laid bedded and pointed in any mortar including removal complete all as specified and directed.
M&L for 40 mm thick locally available brick tiles laid over and including 15 mm thick screed bed in cement mortar 1:4 . The cement mortar screed shall be mixed with polymer based liquid water proofing compound as per manufacturers instructions and joints of tiles shall be filled with CM 1:3 mixed with crude complete all as specified and directed.
M&L cutting out cracks to V-section in existing roof slab or terrace, cleaning out, wetting, grouting, with cement sand slurry in 1:3 mixed with WPC @ 2% by wt of cement complete all as specified and directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M & L in replacement of iron gate/door shutters/frames by easing or resecuring and adjusting of any description exc 1.50 Sqm but n.exc 4 Sqm without taking down by cutting and welding the frame or shutter complete all as specified and directed.
S&F in repair stainless steel tubing of 25 mm dia having min. 1.0 mm wall thickness as in curtain rod complete including 02 Nos stainless steel brackets and finials fancy type, stops fixed with ss screws etc complete all as specified and directed. . Note : For the purpose of measurement and payment running length of curtain rod only shall be considered.
S&F factory made pre-laminated PVC solid board 18-20 mm thick prelaminated on both sides with wooden finished on one side and white finished lamination on other side as in cup-board front shutters complete fixed in position all as specified and directed.
S&F solid WPC door frames of size 62 mm x 32 mm single rebate made out of solid WPC with standard Grade Density 780 Kg/cum single side prelaminated PVC sheet and edges will be painted to match with prelaminated sheet as per specification and drawing.
S&F Stainless Steel (304 Grade) Finished Butt Hinges 150mm with stainless steel screws complete all as specified and directed.
S&F Stainless Steel (304 Grade) Finished Handles 150 mm with stainless steel screws complete all as specified and directed.
S&F Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long with stainless steel screws complete all as specified and directed.
S&F Hasp and staple 100 mm wide, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F 18 mm thick with min density 600 Kg/cum LEAD FREE PVC Celuka plywood of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent
S&F 18 mm thick with min density 600 Kg/cum LEAD FREE PVC Celuka plywood of single side rigid laminate of approved colour and other side plain white colour fixed with SS screws and solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent
S&F 12 mm thick with min density 600 Kg/cum LEAD FREE PVC Celuka plywood fixed with SS screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent
S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed. Make : KAFF or Hettich or equivalent
S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, complete all as specified and directed. Make: KAFF or Hettich or equivalent
S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position complete all as specified and directed. Make : Harrison (Jasmine) or equivalent
S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed. Make : Hettitch or equivalent
S&F Stainless Steel 304 grade wire Basket (avg. weight 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size complete fixed in position complete all as specified and directed. Make : Hettitch/Godrej/Kaff/Harrison
S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position complete all as specified and directed. Make : Hettitch/Godrej/Kaff/Harrison or equivalent
S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions complete all as specified and directed. Make : Hettitch or equivalent.
S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified and directed.
S&F in repair plate rack with racks and guard bars made out of stainless steel minimum 1mm thick, over all size 786mm X 914mm X 254mm and assembled with using brass nuts, bolts and washers complete all as specified and directed. Make : Cat Part No- P- 348 of Prayag or equivalent in size of Jayna
Taking down old unserviceable copper/aluminum point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/casings & capping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators, sockets and defective main switch/DB/MCB/Metal plug etc. by unscrewing carefully from boards etc and making good disturbed surfaces of walls complete all as specified and directed.
M & L for point wiring for light/fan controlled by one switch with 1.5 sqmm single core 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including MS pressed steel sheet (1.6mm thick) sunk box with 3mm thick ISI marked laminated bakellite sheet fixed with chromium / nickel plated screws and washers for switches and sockets, including 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specified and directed.
All as per srl item No 117 above but for call bell point complete all as specified and directed.
All as per srl item No 117 above but for 5 pin 5 amps socket outlet independent board complete all as specified and directed.
All as per srl item No 117 above but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.
M&L for point wiring with 2.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with in and including PVC concealed conduit medium grade with all fittings including pressed MS sheet (1.6 mm thick) sunken box with 3mm laminated bakellite sheet cover ISI marked suitable for an independant 6 pin 15/16 amps socket outlet ,including 2.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to comman earth dolly including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area to match with the adjoining surface complete all as specified and directed.
M&L for point wiring with 4 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with in and including PVC concealed conduit medium grade with all fittings including pressed MS sheet (1.6 mm thick) sunken box with 3mm laminated bakellite sheet cover ISI marked suitable for an metal clad socket 20 amps socket outlet ,including 4 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to comman earth dolly including cutting chases in walls / floors for concealed conducting and making good disturbed surface area to match with the adjoining surface complete all as specified and directed.
Supply and laying non metallic PVC conduit 20mm bore medium grade totally concealed for routing wire for TV/Telephone with all fittings (ISI Marked) complete all as specified and directed.
S & F modular type T V Co- axial socket , 1 Module with including junction box , sheet cover, modular plate and frame complete all as specified and directed.
S&F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.
S&F bell push flush type 5 amps SP 240 volts complete all as specified and directed.
S&F switch piano flush type one way 16 amps SP 240 volts complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin 5/6 amps flush type 240 volts complete all as specified and directed.
S&F socket outlet 2 in 1, 6 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.
S&F bell ding dong AC , 230 VOLTS, single pole complete all as specified and directed.
S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed.
S&F ceiling fan regulator, electronic stepped type 5 stage speed regulation, ISI marked complete all as specified and directed.
S & F lamp holder/baton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed. Make : Havells Reo/Cona/ SSK.
S&F in replacement of Wall/surface mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed. Make :HALONIX Cat paart No - HLTLD-04-20-CW , ORIENT Cat part No-LBLN-20-C-AL- /Phlips Cat part No- BN021C LED22S PSU CW GR
S&F Wall/surface mounted type LED light fitting batten type complete with LED 1x 10 watt (2 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed. Make- ORIENT Cat part No-LBLN-10-C-SQ/Phlips cat part- BN021LED12S6500PSUGR, HALONIX Cat part no HLTLD-04-10-CW
S&F decorative wall mounting light fittings with opal glass diffuser and stainless steel body suitable for LED lamp 12 Watt (B-22 base) including one number 12 Watt LED lamp complete all specified and directed. Make: HALONIX Cat part No HLWB-01-B22, or equivalent in Philips/Havells.
S&F in replacement of emery saving new generation LED 10 Watts, IP-65 bulk head luminaries with opal diffuser complete including making connection with 3 core copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fittings complete all as specified and directed. Make :- ORIENT Cat part No-LIBHP-10-C /Philips cat part- WT202W LED10S CW PSU S3 PC/ Havells Cat part No- RUGBY GENXFS 10WLED 865SSYMBOPC
S&F in replacement of Lithium based Energy Efficient integrated Solar street light of 24 Watt in single FRP body with dryly polyurethane coating (Camouflage color), encases with Monocrystalline solar PV Panel of 53/55 Wp, lithium battery 11.1/12.8V, 28.6AH with inbuilt BMS, IP65 high brightness W LED 160-180Lm/watt) lamp with Aluminum reflector for batter light distribution , CRI>70, Colour Tempeture 57000K-65000K micro controller based charge controller cum driver automatic dimming function(First four hours at full brightness & rest of the at lower light level with PIR motion sensor), dust to dawn operation suitable to working tempreture -10C to +55C , weight more than 12-14 Kg with suitable size of GI bend pipe, adjustable MS clamp suitable for pole/wall mounting etc complete all as specified and directed. Make - Axon Tech Industries/Okay Power Pvt Ltd.
M&L for taking down carefully existing ceiling fan/exhaust fan from site before B/R repair work, keeping in safe custody in store for greasing / oiling of ball bearings / bushes and making it for smooth and noise free operation and painting with Hi-Gloss synthetic enamel paint of approved shade by spray painting after filling cavities and re-fixing after providing new fan clamp, nuts/bolts, washers, down rod as required and provision of 3 core copper flexible cable of size 1.0 Sqmm from ceiling rose to fan connector complete with writing of MES No. on the fan surface complete all as specified and directed.
Cutting wall of any type, making hole for fixing of exhaust fan size 250-300mm sweep (round/squire) and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed.
Supply and fixing exhaust fan 300 mm sweep steel body heavy duty 1200 RPM, AC, Single phase, 230 volts complete with louvers shutters and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan complete all as specified and directed.
Supply and fixing exhaust fan 250 mm sweep PVC body, AC, Single phase, 230 volts complete with louvers shutters and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan complete all as specified and directed.
Dismantling and taking down old serviceable Energy Meters of any type / capacity after necessary disconnection of electrical wires etc. and marking the Quarter No on each meters with permanent marker pen and keeping in safe custody for re-fixing /reconnection in new meter cabinet all as specified and as directed.
S & F Meter box polycarbonate thermoplastic, of size 276x366x186mm (Approx) enclosure minimum IP 65 protection with thermally embedded gasket all four sides pre knock out cable entry system, dust proof, shock proof, water proof to accommodate one single phase electronic meter as dismantled under item no 143 and including 25amp MCB DP, cable connector suitable rating and cable glands suitable size or as per requirement at site all as per IEC connecting with suitable size of single core mutli stranded copper conductor wire from DB to Meter Boards and necessary cutting chasing for meter board and making good the disturbed surface matching with existing complete all as specified and directed.
Taking down distribution board of any type including cut out, MCB etc complete all as specified and directed.
Supply and fix sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 12 way, double door with 100 Amp rated copper bus bar and metal door with IP - 43 and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed.
S & F MCB single pole 240 volts, 'C' curve of rating from 6 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables complete all as specified and directed. .
S & F MCB SPN 240 volts, 'C' curve of rating from 6 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables complete all as specified and directed. .
S&F in replacement of sheet metal enclosures, single pole with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.
M&L in replacement of earthing with galvanised steel earth plate electrode, 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15 mm bore medium grade protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal, salt complete all as per SSR with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way including earth work in any type of soil , removal of surplus soil to a distance n.exc 50 m and connecting, testing on completion all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed. (Note: Excavation and earth work is deemed to be included in the rates quoted).
Taking up and down old/ GI tubing with all fittings of size 25 mm dia. complete all as specified and directed.
M & L for supply, fixing and laying GI water tubing 25 mm bore medium grade ISI marked with all required fittings such as bends, elbow, tees, short pieces, connector, check nuts and threading complete all as specified and directed at site.
M & L for replacement of existing unserviceable Gun metal gate valve ISI marked with iron wheet head screwed both ends for pipe of size 25 mm complete all as specified and directed.
Excavation in trenches not exc.1.5 Mtr in width and not exceeding 1.5 Mtr in depth for laying of cables and getting out in hard/dense soil etc complete all as specified and directed.
Returning, filling in including spreading, leveling, watering and well ramming in layer not exceeding 25 cm thick using soil complete all as specified and directed.
Removing excavated surplus soil to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.
Taking out old unserviceable LT UG cables of size 16 Sqmm 2 Core from trenches, poles/walls and floor etc complete all as specified and directed. Note; Earth work shall be measured and paid under respective item of sch.
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 16 sq. mm 2 core, complete, including earth work, sand cushioning, brick or PCC covering, light grade GI tubing where necessary all as specified and directed.
Supply and laying corrugated HDPE pipe of 40mm dia for cable protection confirming IS-14930 1 & 2, laid in trenches or fixing to the pole with necessary accessories complete all as specified and directed.
Material and labour of GI tubing light grade of 40 mm dia for cable protection on pole/wall/floor/ or in trenches and drain etc complete with necessary clamp, nut, bolts and washers and socket and making good the disturbed surface of wall , floor or roof etc complete all as specified and directed.
Supply and fixing post top lantern including LED lamp 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with diver and lamp complete all as specified and directed. Make : Havells Model No - LHDC11126099 or equivalent in Bajaj/Crompton.
S&F in replacement of PVC insulated copper conductor FR grade 1.5 sqmm,three core cable, ISI marked. Make - Havells/Polycab/Finolex.
S&F in replacement of rigid PVC conduit of dia 25 mm ISI marked including all connected accessories complete all as specified and directed.
M/s Laxmi Associate
Lachman Das Govind Ram
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .