Construction of new bus shelter at Telungupalayam Junction Perur Main Road in Ward No 76, South Zone

Amount

Earth work excavation for foundation in ordinary soil, light black cotton sandy loam and dry silt including shoring, strutting, baling or pumping out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick and depositing the surplus earth at places as directed by the departmental officers with initial lead and lift - 10 m3

Plain cement concrete 1:4:8 mix (One cement four M.Sand and eight aggregate) using 40mm size ISS gauge HBBG metal including mixing, laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification - 1 m3 (detailed data for 10 m3 )

Supplying and erecting for shuttering, including necessary supports for plane surface in foundation and basement for RCC column footings, Plinth beams, staircase steps, etc., using mild steel sheets of size 90cm x 60cm and 10gauge, stiffened with mild steel angle of size 25mm x 25mm x 3mm for boarding, supported by silver oak joists of size 10 x6.5cm, spaced at about 90cm centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete, complying with standard specifications and as directed etc., complete - 1 m2

Supplying and erecting for CENTERING, including necessary supports for plane surface in oundation and basement for RCC column footings, Plinth beams, staircase steps, etc., using mild steel sheets of size 90cm x 60cm and 10gauge, stiffened with mild steel angle of size 25mm x 25mm x 3mm for boarding, supported by silver oak joists of size 10 x6.5cm, spaced at about 90cm centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete, complying with standard specifications and as directed etc., complete - 1 m2

Supplying and erecting CENTERING for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC SLABS etc as per standard specification etc complete.,

Providing and laying in position of ready mix concrete 1:1.5:3 mix using Portland cement with water cement ratio not exceeding 0.45 including the use of plastidizer of approved make and dosage required grade at all location and levels using 20mm ISS gauge HBBG metal and down graded aggregates in all type of works including hire charges for pump and pumping charges to required location. machine, vibrating, tapping, curing as specified charges conveyance for ready mixed concrete from RMC plant to site or required (excluding cost of reinforcement, fabrication charges centering and shuttering ) mix by departmental officers etc complete as per IS 4926 of 1976/1990

Supplying, fabrication and placing in position of steel reinforcement using mild steel of Ribbed for steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wore and all labour charges for cutting, bending & tying etc., complying with standard specifications - 1 Quintal

Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4" x 41/4" x 23/4") including cost of materials and labour charges etc., as per standard specification - 1m3

Flooring with Stain free Nano polish Vetrified flooring tiles of size 600 x 600 x 8mm of approved colour and quality of required size laid in cement mortar 1:3 mix 20mm thick and pointing with the same mortar complete and finish very neatly etc complete.,

Paving the floor with fully polised Colour Granite stone of 20mm thick of size 4' x 2' laid over a cement mortar 1:3 mix, fixing the slab in true tight angles applying cement slurry and pointed with white cement and colour pigments and curing etc. complete as directed by depat. officers.

PLASTERING with cement mortar 1:3 (One cement and three Sand) 12mm thick in all floors complying with standard specifications.

Plastering for brickwork and concrete surfaces using cement mortar 1:5 (One part of cement, five parts of sand by volume) thickness 12mm (average) for all internal/external surfaces like superstructure, rainwater ducts, elevation

Painting two coats with ready mixed plastic emulsion paint of 1st class quality and of approved color over a priming coat including through scraping clean removal of dirt etc., complete and including necessary plaster of paris putty wherever required - 1 m2 .

Painting with best synthetic enamel paint of approved Colour and high quality one / two coats to old / new iron works.

Supply and fixing of M.S.Angle and Grills including one coat of red oxide paint etc. complete.

Supply and fixing of perforated chairs as per the direction of Dept. off., Etc complete

Weathering course with concrete broken brick jelly 20mm size in pure slaked lime (no sand to be used) over RCC roof slab the proportion of broken brick jelly to lime being 32:12.5 well beaten with wooden beaters giving required slopes and thickness etc., complete - 10m2 (Detailed data for 1 m3)

Flooring with 20mm thick cement concrete 1:3 mix (no sand to be used) using 3mm to 10mm ISS gauge HBBG chips and the surface rubbed hard and finished smooth with neat cement Ellise pattern surface 1 sort - 1m2

Writing for Arch name board using brace and stainless steel metal with lettering as per standard specification etc

Add :- GST @ 18%

V RAJAGOPAL (BID ID -1499013)