PROVN OF FURNITURE FOR VARIOUS LOCATIONS UNDER GE (S) BATHINDA AT BATHINDA MIL STN

Amount

Part - I Steel items

Almirah Large Steel ( Drg No. FD -1031)

Almirah Med Steel ( Drg No. FD -1032)

Bath mat PVC (Drg No. FD/E6/MAP/07 )

Bed Hard steel (Drg No. FD/E6/MAP/8(R))

Bench Workshop (Steel) (1500mm x 900mm x 760mm) ( Drg No. FD-1024 )

Chair CB steel with Arms (Drg.No. FD -75M)

Charpoy IP Hard Top (Drg No. FD/MAP-II/01)

Form with back (FD-78(M)

Form without back (overall size 1900mm long) (FD-1027)

Ladder Aluminium ( Drg No. FD -1025)

Rack Steel 6 Tier (1905 mm H x 915 mm W x 610 mm D) (Drg No. FD -1038 )

Rack rifle for (INSAS) 20 Arms (Drg No.-BTD-096)

Receptacle PVC (Drg No. FD/E6/MAP/13 )

Stool steel (Drg No. FD-409)

Table 900x600x760 mm with drawer (Drg No.FD-1008 )

Table 900x600x760 mm without drawer (Drg No.FD-1007 )

Table Bed Side MAP ( Drg No. FD/E6/MAP/15(R))

Table office clerk steel (Drg No. FD -1004)

Trestle store room steel ( Drg No. FD-1043)

Sub total of Part - I

Part - II (Wooden Items).

Chair Dining (Drg No. FD -1105)

Chair Easy (Drg No. FD - 229)

Chair writing (Drg No.FD - 280)

Hot case small (Drg No. FD-363)

Table 600x 600 x 760 mm (Drg No. FD-293 )

Table centre (Drg No. FD-274 )

Table cook house (Drg No. FD-297 )

Table Dining 6 Person (Drg No. FD - 273 )

Table dressing gents with mirror (Drg No.FD-379 )

Table Peg (Drg No. FD-384)

Table writing (Drg No. FD - 275)

Teapoy wooden (Drg No. FD-382)

Sub total of Part - II

Note:- Applicable for all parts:- (i) The bidders/contractors are advised to read relevant contract drawings and particular specifications. Key specifications, Special conditions and Genral Conditions of contracts before entry/quoting the rates. (ii) Bidder may quote all two parts as a whole or only one part. This aspect should be clearly indicated by the tenderer on letter pad and scanned copy should also be uploaded in cover-I clarifying that the tenderer has quoted as a whole or for any specific part/parts. (iii) The Accepting Officer reserve his right to accept tender as a whole or in parts. the contractor shall not have any claim what so ever for accepting the contracts as whole or part wise. Decision of Accepting Officer in this regard shall be final and binding. (iv) If contractor wishes not to quote any part/parts ( as per his eligibility given in NIT) he should quote " 0" rates in the Rate column of that particular part/parts. Accordingly such offer shall not be considred Non bonafide & it will be construed that the contractor has not quoted that particular part/parts.

M/s MAKHAN ENTERPRISES

B K CONTRACTORS