Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹84.1 LAccepted-AOC LAMTIBAHAL BRAJRAJNAGAR JHARSUGUDA 768216 | BRAJRAJNAGAR | JHARSUGUDA | ODISHA | 768216 | L-1 | Accepted-AOC Successful single bid offer | |
| 2 | Rejected-Technical AT PO LAMTIBAHAL BRAJRAJNAGAR DIST JHARSUGUDA ODISHA 768216 | JHARSUGUDA | ODISHA | 768216 | - | Rejected-Technical Not Admitted | |
| 3 | Rejected-Technical | - | Rejected-Technical Not Admitted |
Tender Value
₹79.7 L
EMD Value
₹99,700
Closing Date
27 Jul 2022, 5:00 pmClosed
STAFF OFFICER CIVIL MCL LAKHANPUR AREA
GM OFFICE MCL LAKHANPUR AREA
Construction of Chaurinmahul to Banjari post office Pada road under CSR of Lakhanpur OCP of Lakhanpur Area of MCL.
2022_MCL_249337_1
MCL/GM/LKPA/SOC/2022-23/15/311 dt 07.07.22
Open Tender
Civil Works - Roads
Item Rate
45 days
GM OFFICE MCL LAKHANPUR AREA
AS PER NIT
5 documents required · 5 mandatory
₹99,700
10 Oct 2022
8 Jul 2022
29 Jul 2022
8 Jul 2022
27 Jul 2022
8 Jul 2022
8 Jul 2022 - 16 Jul 2022
Amount
Item Description/ Heading
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)
Bituminous Macadam (Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction) (i) for Grading II ( 19 mm nominal size )
Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.)
Tack coat Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.
Close Graded Premix surfacing/Mixed Seal Surfacing (Mechanical means using HMP of appropriate capacity not less than 75 tonnes/hour. Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-a) or 13.2 mm to 0.09 mm (Type-b) aggregates using penetration grade bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade. )
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in :Cement mortar 1:6 (1 cement : 6 Coarse sand).
12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand).
Neat cement punning.
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm).
Lettering with black Japan paint of approved brand and manufacture.
Total impact of GST for the purpose of CTC
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .