Electrification works to Taluk office building at Vanapuram in Kallakurichi District

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Supply and fixing of fancy glass shade and 9W LED bulb.

Supply and fixing of single box type 4' 18 W LED fitting complete with TW round blocks on wall or ceiling with 18 W LED tube light with Single side connection. (Havells / equivalant) with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of single box type 4' 18 W LED fitting complete with TW round blocks with conduit pipe suspension from the ceiling with 18 W LED tube light with single side connection. (Havells / equivalant) with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of Aesthetically designed ultra modern 34 W 2' x 2' recessed Mounting luminaire with high brightness LED fitting (Havels model No. PLUTO NEO 2X2 PLR 34W LED857S / Equivalent) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of Aesthetically designed ultra modern 34 W 2' x 2' Surface Mounting luminaire with high brightness LED fitting (Havels model No. Pluto NEO PANEL 2x2 LHEWEJP7PL 1W034) (Havells / Crompton /Wipro) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of Aesthetically designed ultra modern 15 W 1' x 1' surface Mounting luminaire with high brightness LED fitting (Havels model No. PLUTO1X1PLR15WLED857S) (Havells / Crompton/Wipro) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of Aesthetically designed ultra modern 15 W 1' x 1' recessed Mounting luminaire with high brightness LED fitting (Havels model No. PLUTO1X1PLR15WLED857S) (Havells / Crompton/Wipro) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of 20 W IP65 surface panel light fitting (Make like Luker Cat No. LOR65 20 / equivalant) with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of Recess mounted downlighter with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integrated driver down lighter fittings (Havels model No. INTEGRANEODLR10WLED830S / Equivalent) on ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no. 32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting.

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600 mm down rod on the existing fan clamp.

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan.

Supply and fixing of 375mm (15") sweep (light duty) AC exhaust fan complete with necessary wall opening and making of the wall.

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep light duty AC exhaust fan.

Supply and fixing of 3nos. 6A two module 3 pin socket, 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 1 no. 6/16A two module socket, 1 no.16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection. (For AC Plug)

Supply and fixing of 40 A Rotary switch with 3 Nos Indicator combined with switch insutable sheet steel encloser on wall with earth connection only.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and fixing of Vertical type 6 way Triple pole and neutral MCB Double door Distribution board in sheet steel enclosure with metal door with IP42 protection with 1 No. of 63 A FP MCB as incoming and 18 Nos. of 6A to 32A SP MCB outgoing on wall with suitable angle iron framework with Cable entry box on top or bottom with earth connection only. The MCB DB and MCB's should be with Legrand / Hager make only

Supply and fixing of Vertical type 8 way Triple pole and neutral MCB Double door Distribution board in sheet steel enclosure with metal door with IP42 protection with 1 No. of 100 A FP MCB as incoming and 4 No's 63A TP MCB, 1 No 32A TP MCBand 9 Nos. of 6A to 32A SP MCB outgoing on wall with suitable angle iron framework with Cable entry box on top or bottom with earth connection only. The MCB DB and MCB's should be with Legrand / Hager make only

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion.

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire conection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire conection of 6 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position.

Supply and Laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3-1/2 x 70 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and clarnping of 3 1/2x 70 sq.mm PVC LTUG armoured LTUG cable on post or on wall through suitable GI pipe.

Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3-1/2 x 70 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and fixing of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete.

Supply and fixing of 32A DP MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection. The DP MCB Enclosure should be of Legrand / Hager make only.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed FRLS copper leads from SMC box to fitting and with painting of suitable colour.

Supply and laying of 2 x 10 sq.mm. PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and clamping of 2 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection.

Supply erection, Testing and commissioning of 2 TR split type 5 star rated AC units fitted with hermetically sealed Air compressor with R22 refrigerant air cooled condenser, fan etc. and 1 No indoor Hi wall mounted 2.0 TR capacity evaporator unit complete with cooling coil, blower motor and connected accessories, control etc chord wire connecting indoor and outdoor unit with drain pipe suitable for operation on 230V + 10% 50Hz sinle phase AC supply. (Make - Carrier/ OGeneral/ Daikin/ Toshiba)

Supply and fixing of 5 KVA voltage stabilizer (V guard /Eq.make ) suitable for 2.0 tons capacity split type air conditioner with 3 minutes time delay and low / high voltage cut off switch (wall mounting) with necessary wire connection.

Supply and laying of 5/8" and 3/8" Copper Pipe. (Extra beyond 3 metres supplied with AC unit) (For split AC Unit)

Supply and fixing of Ms stand for fixing outdoor units.

Design, Engineering, Supply, Fabrication, Erection, Testing, commissioning and handing over of 1 no 13 persons capacity passenger lift as per the following specifications including taxes and duties. 1.Location: Taluk Office Vanapuram 2.No of lift: one No 3.Type of lift: passenger 4.Capacity of lift: 13 persons / 884 Kgs 5.Speed: 1m / sec 6.Type of drive: V3F drive with enhanced ride comfort and near zero level functions 7.No of floors: GF+2Floor 8.Total travel: 3.3 mts x 3 = 9.9 mts 9.Leveling accuracy: high level accuracy with smooth and jerk free stopping 10. Construction of CAR: No 4 hardened sheet high quality stainless steel car and hand rail granite flooring and Perspex false ceiling. 11. Position of machine: directly above the lift well. 12. No of landing service: one in the front side-3no’s 13. No. of car entrance: one in the front side only 14. Car entrance door: power operated automatic V3F drive center opening sliding SS door 15. Landing entrance door: power operated V3F drive center opening sliding SS door with provision for emergency exit key at all landings. 16.Lift well Size : 2500 mm (wide)x 1900 mm (depth)as per ISI 14665(part1) 2000 17.Lift pit depth:1600 mm 18. Car size:2000 mm (width)x1100 mm (depth) as per IS 14665 (part 1) 2000, 19. Car clear opening: 900 mm wide x 2000 mm height as per IS 14665 (part 1) 2000

20.Lift machine room size:4000 mm wide x 5000 mm depth as per ISI 14665 (part 1)2000 21. Power supply: 400 / 440 v three phase 50 Hz AC supply for power and 230 V 50 Hz single phase power supply for light. 22.Control: micro computer (micro processor):based simplex collective control with / without attendant 23. Car fittings: CFL lighting with 1 no 300 mm sweep cabin fan. 24. Lift well: RCC construction with brick masonry to be constructed by PWD civil wing. 25. Induction: UP / DOWN digital direction and position indicator for all landings and inside the car. 26.Emergency alarm bell: battery operated bell to be provided with automatic charging device 27.Emergency light: battery operated light to be provided with automatic

charging device 28.Fire mans switch: to be provided at the GF 29. Minor builder works: to be provided by the lift contractor. 30. Scaffoldings: to be provided by the lift contractor. 31. Sill angles and fascia plates: SS to be provided by the lift contractor. 32. Steel for lift machinery: to be provided by the lift contractor. 33. Servicing and maintenance: free comprehensive servicing and maintenance for one year Guarantee period to be provided by the lift contractor. 34. Automatic rescue device: to facilitate the landing of the nearest floor at the time of power failure this shall consist of suitable battery system with charger inverter under voltage protection system etc. complete with all accessories. 35. Provision for intercom with phone: to be provided by the lift contractor. 36.Lift license: preparation of drawings payment of charges to CEIG and insurance policy if any and obtaining CEIG approval for the lift as per lift act should be done by the lift contractor 37. Floor position announcer: to be provided by the lift contractor. 38.Special features a) Infra red door sensor with full height screen b) Full width half height rear panel mirror c)Tubular SS hand rail in car d) Stainless steel signal features e) Vandal proof SS button with SS cover f) SS door frames for landing doors g) V3F door operator h) Call register signal

i) Stainless steel fascia plates for car operating panel and landing fixtures j) Steel ladder for lift machine room k) On / off switch for fan and light l) Over load warning indicator with audio announcer m)Voltage stabilizer for control circuits n)Braille button 39.Over speed governor phase failure and phase reversal relay alarm bell T guide brackets for car and counter weight rubber padding under the winding unit motor of adequate capacity signal reduction worm gear electromagnetic brake with compression springs car safety gears buffers electro mechanical locks emergency key side supporting angles motor over load protection devices final limit switch main suspension ropes counter weight lifting joist for mounting the machineries 40. Guarantee: guarantee at least for one year for the material and workman ship of equipments should be offered by the lift contractor. 41. Site testing in accordance with IS 14665 should be carried out at the time of handing over to the user department 42. Supply operation and maintenance manual and necessary tools for operation and a set of Spare parts required for one year.

Supply and fixing of 4 MP Fixed Mini Bullet Network Camera.High quality imaging with 4 MP resolution. Excellent low-light performance via powered-by-Dark Fighter technology. Efficient H.265+ compression technology Clear imaging against strong back light due to 120 dB true WDR technology. Water and dust resistant (IP67) Robust structure design with full metal material.Make:Hikvision/equivalent.

Supply and installation of 4U Metal Rack with front class door, Lock and Key, also with power manager.

Supply and installation of 16 channel 2-SATA NVR - (Network Video Recorder). Up to 16 channel IP cameras can be connected. Supports decoding .265+/H.265/H.264+/H.264 video formats. Up to 4K high-definition live view, storage and playback. Up to 8-ch @ 1080p decoding capacity. Up to 160 Mbps high incoming bandwidth ensures IP cameras can be connected. 1 HDMI and 1 VGA interfaces: both interfaces support independent video output. 2 HDDs for continuous video recording.Make: Hikvision

Supply and installation of 4TB visual HDD (Hard Disk Drive) with SATA interface. Engineered specifically for surveillance security systems. Tuned for write-intensive, low bit-rate, high stream-count applications typical to most surveillance applications. Prioritized write-operations for maximized surveillance performance. TLER and ATA streaming support.Make: Western Digital/ equivalent.

Supply and Installation of 32" inches professional commercial display Make: Panasonic/LG/Samsung.

Supply and fixing of RJ45 LAN socket with suitable module box and face plate in flush with wall and making good of the concelaed portion (Make - Legrand/Equivalent)

Supply and installation of Ethernet patch Cord 1 m length.

Supply and installation of D-Link Make 24 Port Fully managed 10 /100 /1000 Layer-2 LAN Network Switch.

Supply and installation of D-Link Make 24 Port patch panel fully loaded.

Supply and fixing of 25mm PVC rigid pipe on wall and ceiling with suitable colour for CCTV and LAN.

Supply and run of Cat-6 cable in existing PVC rigid pipe on wall and ceiling.

Supply and installation of 1 KVA UPS with 150AH Batteries with 2 hours power backup. Make: Microtek/Numeric/Equivalent.

Testing, Programming and commissioning Charges for 4 MP Camera, NVR, POE Switch,Hard Disc,UPS and Cables, Camera, NVR etc.,

Supply and fixing of 2.5 KVA Automatic invertor with input Voltage 180V-260V and output voltage 200V -230V 50Hz with 2 No 12V 150AH tubulur Battery and testing complete with connection.

Please Enable Macros to View BoQ information