SPECIAL REPAIR REPLACEMENT OF LT CABLES LT PANELS BUS BAR PANELS FLOOD LIGHTS ALONGWITH CONNECTED ACCESSORIES PROVN OF WATER SUP GRID WITH CHLORIFICATION PLANT AND PROVN OF PREPAID METER AND CONNECTED ACCESSORIES AT LEH GRN UNDER GE 865 EWS

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits,manholes, pier holes, etc. N exc 10 sq m on plan and n exc1.5 m in depth and getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits,manholes, pier holes, etc. N exc 10 sq m on plan and n exc1.5 m in depth and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed by Engr-in-Charge.

Removing excavated material n.exc 50 mtr and depositing where directed at a level n exc. 1.5 m above the starting point., complete all as specified and directed by Engr-in-Charge.

M&L for sand cushioning to underground cables 8cm below the cable before laying and 15cm above the cable after layingc complete all as specified in clause 19.75 of SSR PART -I complete all as specified and directed. Note: Punned thickness of 18cm shall be measured and paid under this item.

Supplying and laying un-reinforced, factory made, machine pressed,precast concrete cable cover, class LV, type 1, flat, size 250mm x 150mm x 40mm complete all as specified and as directed.

Supply and laying, jointing and testing cable, LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cable heavy duty 1100 volts grade with stranded aluminium conductor in size 120 Sqmm 3.5 core laid in trenches or passing through pipes, ducts or fixed to walls/poles complete all as specified and directed by Engr-in-Charge. Make as per PS.

Supply and laying, jointing and testing cable, LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cable heavy duty 1100 volts grade with stranded aluminium conductor in size 70 Sqmm 3.5 core laid in trenches or passing through pipes, ducts or fixed to walls/poles complete all as specified and directed by Engr-in-Charge. Make as per PS.

Supply and laying, jointing and testing cable, LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cable heavy duty 1100 volts grade with stranded aluminium conductor in size 50 Sqmm 3.5 core laid in trenches or passing through pipes, ducts or fixed to walls/poles complete all as specified and directed by Engr-in-Charge. Make as per PS.

Supply and laying, jointing and testing cable, LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cable heavy duty 1100 volts grade with stranded aluminium conductor in size 35 Sqmm 3.5 core laid in trenches or passing through pipes, ducts or fixed to walls/poles complete all as specified and directed by Engr-in-Charge. Make as per PS.

Supply and laying, jointing and testing cable, LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cable heavy duty 1100 volts grade with stranded aluminium conductor in size 16 Sqmm 2 core laid in trenches or passing through pipes, ducts or fixed to walls/poles complete all as specified and directed by Engr-in-Charge. Make as per PS.

Supply and laying, jointing and testing cable, LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cable heavy duty 1100 volts grade with stranded aluminium conductor in size 10 Sqmm 2 core laid in trenches or passing through pipes, ducts or fixed to walls/poles complete all as specified and directed by Engr-in-Charge. Make as per PS.

Supply and fixing compact air insulated rising main with copper bus bar 400 Amps, breaking capacity of 35 KA and IP 54 protection, 415 V, 3 Phase bus bar chamber with 4 Nos bus bar strip of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing compact air insulated rising main with copper bus bar 315 Amps, breaking capacity of 35 KA and IP 54 protection, 415 V, 3 Phase bus bar chamber with 4 Nos bus bar strip of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing compact air insulated rising main with copper bus bar 200 Amps, breaking capacity of 25 KA and IP 54 protection, 415 V, 3 Phase bus bar chamber with 4 Nos bus bar strip of suitable size complete all as specified and directed by Engineer-in-Charge.

M&L for 80 mm bore light grade galvanished iron water tubing with all fittings and fixed on walls and ceiling or laid in floors complete all as specified and directed.

M&L for 50 mm bore light grade galvanished iron water tubing with all fittings and fixed on walls and ceiling or laid in floors complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level connected to and including galvanised iron strip 32x6mm as earthing lead by means of nuts, bolts, washers etc made of galvanised iron or steel and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including testing on completion and excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore light grade GI watering pipe, lugs, 40mm bore light grade GI protection pipe, including test point of strip 50x50x3mm, etc, complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. Any additional length shall be adjusted through deviation order. (ii) Item includes the cost of 7.5 m GI earth lead. Any additional in length shall be adjusted through deviation order ( For Main DBs ) (iii) Item includes the cost of Charcoal and commercial salt ( For Main DBs )

Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. complete all as specified and directed by Engr-in-Charge. Make as per PS.

Supply and fixing LED luminaire 600mm x 600mm 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED luminaire 600mm x 600mm 24 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing digital type single phase two wire AC static energy 10-60 Amps single source direct current class 1.0 Keypad based pre payment energy meter with customer interface unit (CIU) and soft Toen transformer Device (STTD), comprising of 1 No single source prepayment meter + 1 No CIU without cable +1 No STTD with connecting service connection and testing complete all as specified and directed by Engr-in-Charge. Make: HPL/ Secure/L&T

Supply and fixing digital type three phase four wire AC static energy 10-100 Amps single source direct current class 1.0 Keypad based pre payment energy meter with customer interface unit (CIU) and soft Toen transformer Device (STTD), comprising of 1 No single source prepayment meter + 1 No CIU without cable +1 No STTD with connecting service connection and testing complete all as specified and directed by Engr-in-Charge. Make: HPL/ Secure/L&T

M&L for installation charges for Web based vending system (One time charges) with provision of handware key, providing technician for training to detailed staff of GE 865 EWS to operate vending system including tariff designing customer database, Tariff creation, setting of load limit and meter allotment complete all as specified and directed by Engr-in-Charge.

Annual Charges of Vending Machine transaction. This charges are applicable for per meter basis

Supply and Fixing RJ-1 communication cable 4 core cable approx 5 meter cable for per meter for connection between main meter and freedom unit complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out insoft/loose soil complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) 100 mm thick as in foundation filling and mass concrete complete all as specified and directed.

M&L for precast cement concrete block masonary type, 1:3:6, with solid blocks exc. 10cm in width, C-1, (using 20mm graded crushed stone aggregate), set and jointed in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L hardcore of guage n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick with broken stone or boulders, watered and rammed to a true surface complete all as specified and as directed by Engr-in-Charge.

M&L rendering 15mm thick in CM 1:4 on fair or other than fair faces of concrete or brick surfaces as in wall finishes even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

S&F chromium plated, brass bib tap, fancy type, screwed down , screwed for iron pipe or for brass ferrule 15 mm bore etc (Min weight 350 gms) or equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge.

Supply installation, testing and commissioning PUF insulation tank, insulated with 50mm thick PUF insulation of density not less than 48Kg/Cum, inner and out white, two layers, ISI marked (cylinderical vertical/rectangular/loft type with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, complete all as specified and as directed by Engr-in-Charge.

S&F 25mm bore stop cock, fancy type, chromium plated cast copper alloy screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F 25 mm bore ball brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge.

M&L for preparation of plastered or unplastered new surfaces of walls incl cornices, chajjas, sun shades etc and applying two coats of cement base paint (1st quality) with and including curing before and after applying each coat of cement base paint (as approved by GE) complete all as specified and directed.

M&L for 50 mm bore medium grade galvanished iron water tubing with all fittings and laid in floors or trenches complete all as specified and directed.

M&L for 40 mm bore medium grade galvanished iron water tubing with all fittings and laid in floors or trenches complete all as specified and directed.

M&L for 25 mm bore medium grade galvanished iron water tubing with all fittings and laid in floors or trenches complete all as specified and directed.

M&L for 20 mm bore medium grade galvanished iron water tubing with all fittings and laid in floors or trenches complete all as specified and directed.

M&L for cutting of existing pipe line and insertion of 'T' for tapping of 50mm GI pipe/40mm GI pipe for further connection to OH tank complete all as specified and directed. Note: Rate quoted deemed to be inclusive of cutting, welding and insertion of T with reducer etc.

S&F 50mm dia bore gun metal gate valve ISI marked cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engr-in-Charge.

S&F 40mm dia bore gun metal gate valve ISI marked cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engr-in-Charge.

S&F 25mm dia bore gun metal gate valve ISI marked cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engr-in-Charge.

S&F 20 mm dia bore gun metal gate valve ISI marked cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engr-in-Charge.

S&F tracer cable for binding water pipe lines raising main and distribution lines including electric connections etc complete all as specified and directed by Engr-in-Charge.

M&L for insulation pipe with PUF slab 30mm thick with and including applying adhesive compound and GI cladding with 26 guage GI sheet complete for 20mm dia pipe with provision for arrangement of tracer cable (tracer cable will be measured and paid separately) all as specified and directed by Engr-in-Charge.

M&L for insulation pipe with PUF slab 30mm thick with and including applying adhesive compound and GI cladding with 26 guage GI sheet complete for 25mm dia pipe with provision for arrangement of tracer cable (tracer cable will be measured and paid separately) all as specified and directed by Engr-in-Charge.

M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel section made out of Fe-0-310/Fe-0-410 including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as directed including two coats of aluminium paint over a coat of red oxide primer, complete all as specified and directed.

Supply and installation High pressure single head gear motor adjustable dosing pump set, uneffected on dry running having no loss of prime independent of back pressure and above to handle bot chemical solutions as well as suspensions, 230 volt 50 cycles, AC 44 RPM 1/30 fraction HP having output 2 US GPD to 4c GPD complete with accessories is tubing connecting nuts injection check vales, ferrules etc all as specified and directed by Engr-in-Charge.

Supply and installation Altoc dosing system consisting of 100 litres PE/FRP tank with E/FRP lid and level guage alongwith Agiator (1280 RPM) with shaft and blade (FRP/Epoxy coated) plastic mounted on tank lid having port hole for pouring Altoch and water as required. Lid having provision for mounting dosing pump on lid Agiator motor 90 watts., 1440 RPM, 230 volts 50 cycles, 0.2 Amp and having speed controller to reduce speed upto 800 RPM complete all as specified and directed by Engr-in-Charge.

M&L for formwork to rough finished flat surfaces of concrete, to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed by Engr-in-Charge.

M&L for formwork to rough finished flat surfaces of concrete, to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in damp proof course complete all as specified by Engr-in-Charge.

M&L for RCC M-25 (Design Mix) (using 20mm graded aggregates) for beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified and directed.

M&L for RCC M-25 (Design Mix) (using 20mm graded aggregates) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F mild steel TMT bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips , complete all as specified and directed by Engr-in-Charge.

All as per Srl Item No 59 here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as per specified and directed by Engr-in-Charge.

M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub base of floor, complete all as specified and as directed by Engr-in-Charge.

M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement including making proper joints with bitumen mastic with sand as per specification at an interval of 3m and change of direction complete all as specified and as directed by Engr-in-Charge.

M&L for 25mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in sub-floor, sub-bases, floors complete all as specified by Engr-in-Charge.

M&L Machine cut pre polished Kota stone slab flooring 20-25 mm thick in riser of steps, skirting, dado and pillar laid over 20 mm thick cement screed bed or bedding layer in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing (granite finish) and exposed edges of kota stone shall be rounded complete all as specified and directed by Engr-in-Charge.

S & F 35mm thick 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F 30mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F IInd class hard wood as in plain solid straight chowkhats wrought framed rebated on the solid, rounded and chamfered, put together on with glue pinned at joints complete all as specified and directed by Engr-in-Charge.

S&F mild steel works, as in hold fasts and similar small articles, conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L PCC 1:3:6 type C1 (20mm graded aggregate) as in anchoring hold fast, bed block etc all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section in new position complete all as specified and directed by Engr-in-Charge.

S&F 100mm long mild steel medium weight butt hinges cold rolled complete all as specified and directed by Engr-in-Charge.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

S&F aluminium door handle cast type 150 mm fabircated type anodised complete all as specified and directed by Engr-in-Charge.

M&L rendering 10mm thick in CM 1:6 on fair or other than fair faces of concrete or brick surfaces as in wall finishes even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for plain sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-Charge.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed by Engr-in-Charge.

S&F Mild steel hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting platesconforming to FE 410-W (Gde-E 250) quality A complete all as specified and directed.

S&F mild steel screw bolts , diameter of neck 11 to 15 mm, (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long complete all as specified and as directed.

M & L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L for two coats of synthetic enamel paint over a coat of pink primer of wooden surfaces of any description not otherwise described, over 10cm width or girth including preperation complete all as specified and directed by Engr-in-Charge.

M&L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floor, complete all as specified and as directed by Engr-in-Charge.

M&L for coloured chequered cement concrete tiles 30cm x 30cm x 20-22mm thick with grey cement and pigments in floors etc, set, jointed and pointed in neat cement slurry including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls of any description and applying three coats of white wash on walls complete all as specified and directed by Engr-in-Charge.

M&L for forming Contraction (Dummy) joints 50mm deep x 10mm wide, filled with sealing compound Grade 'A' as in plinth protection complete all as specified and directed.

S & F towel rail 600mm long of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min Wt 190 Gms) complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

M/S Praveen Kumar and Sons

R B TRADERS