COMPREHESIVE MAINT TO OTM ACCN OF SIKH LI RC RRC MH ASC TA BN MES AND OTHER MINOR UNIT AT FATEHGARH

M&L for brick work with sub class 'B' bricks old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) incl demolition complete all as specified and directed.

M&L for brick work (except brick) with sub class 'B' bricks old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) incl demolition complete all as specified and directed.

Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc upto 12 mtr height complete all as specified and directed.

M & L Rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement and applying two coats of Oil Bound Distemper over 1mm thick wall care putty complete all as specified and directed

M & L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement and applying two coats of cement based paint over 1mm thick weather proof exterior wall care putty complete all as specified and directed

M & L for rendering 5 mm thick in CM 1:3 as on concrete surface on ceilings finished even and smooth without using extra cement and applying three coats of white wash complete all as specified and directed.

M & L for complete removal of existing treatment on old plastered surface, preparation of old surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old plastered surfaces over 1mm thick wall care putty.

M&L for complete removal of existing treatment on old plastered surface, preparation of old surfaces and applying Two coats of Oil Bound Distemper over a coat of primer over a coat of 1mm thick wall care putty all as specified and directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick Screed bed in CM 1:6 incl dismantling of tiles and mortar bedding complete all as specified and directed.

M & L for vitrified tiles 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick Screed bed in CM 1:6 incl dismantling of tiles and mortar bedding complete all as specified and directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick Screed bed in CM 1:6 incl dismantling of tiles and mortar bedding complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in CM (1:4) incl dismantling of tiles complete all as specified and directed.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons complete all as specified and directed.

M & L for machine cut kota stone slab as in flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection, sub base of floors, base and similar work finish the surface smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2( using 40mm graded stone aggregate) as in flooring and mass concrete to complete all as specified and directed

M & L in repair chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade of tiles as in floor etc. over 20 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc Including brick work of jambs and Cill in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc Including brick work of jambs and Cill in CM 1:4 complete all as specified and directed.

S&F factory made Steel Window 1.25mm thick Box Type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:2:4) type B-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Hold Fast, 150mm long of 12mm square bar made to shape – 04 Nos per window (b) Handles of Z Sec 100mm long (c) Stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges – 01 No per leaf (e) MS Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Fabrication & fixing arrangement as per TD no LZ/C-TD/130 Note : Glass, and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

S&F factory made Steel Window 1.25mm thick Box Type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf without sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm welded to FI frame and 100mm spacing of guard bar complete all as specified and shown on TD no LZ/C-TD/130 Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.

S & F sheet glass ordinary quality 3 mm thick and glazing with oil putty or fixed with bead / glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

M & L for Preparation of new steel and iron surfaces one coat primer coated by manufacturer of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint etc complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 X 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length Complete all as specified and directed.

Supply & fixing factory made WPC door frame 100% Solid (wood polymer composite) Size 125mm x 65 mm double Rebated ,made from wpc material comparing of virgin PVC polymer of K value 58-60 (suspension grade ) calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk) minimum compressive strength of 58 N/mm2, modulus of elasticity 900N / Sqmm and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in position with SS dash fasteners / hold fast of required dia and length at no extra cost, colour of door frame to match that of shutter all as per specifications drawings complete all as specified and directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges shall be paid separately)

S&F Anodized aluminium frame for doors, windows, ventilators Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr in Charge

S&F Anodised Powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws etc powder coating of any colour (Thickness or powder coating not less than 50 micron). complete all as specified and directed by Engr in Charge.

S&F Powder Coated Anodized aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. powder coating of any colour (Thickness or powder coating not less than 50 micron). complete all as specified and directed by Engr in Charge.

S&F Anodized aluminium grill (anodized transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening, all complete as per requirement and direction of Engineer in charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm double side prelam PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed

S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodized and fixed complete all as specified and directed.

S&F stainless steel butt hinges medium weight of size 100mm fixed with stainless steel screws complete all as specified

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples, wooden beads to steel windows/wooden doors.

S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples, fixed in aluminium windows/vent.

S&F 150 mm, long, Aluminium anodized, barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F Aluminium anodized barrel tower bolts of extruded section of 200mm size etc complete all as specified and directed.

S&F 150 mm long , extruded aluminium alloy handles fabricated type anodized and fixed complete all as specified and directed.

S&F 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

S&F 300 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S & F in repair mild steel helical door spring 300 mm longe ordinary rat tail type incl roller and roller plate fixed with screws to wooden frames or welded to steel frames complete all as specified and directed.

S & F in repairs stainless steel decorative curtain rod of 25 mm bore with 1mm thick including brackets 02 nos finalie 02 nos) etc complete all as specified and as directed.

Dismantling boarding as in kitchen cupboard, drawers, cupboard incl chowkhats etc. fixed in any position complete all as specified and directed.

S & F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated shutter for kitchen cabinet, cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

S & F factory made WPC single extruded 100% lead free ROHS certified board of 6mm thick pre laminated board for kitchen cabinet, cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

S & F ball catches with 8 mm dia steel ball magnet catches for cupboard shutter including striking plate as approved etc complete all as specified and as directed

S & F continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap (when opened) 40 mm etc complete all as specified and as direced.

S & F 1000 litre rotational moulded double layer ISI Marked polyethlene water storage tanks white colour (cylindrical vertical with closed threaded top) and hoisted and fixed in position incl 20 mm PTMT valve with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (min weight 210 gms) incl dismantling of tank complete all as specified in SSR Part I complete all as specified and directed.

S & F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and as directed

S & F medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) incl taking down complete all as specified and as directed.

S & F medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) incl taking down complete all as specified and as directed.

S&F in repairs 15mm Pillar taps, fancy type with long shank cast copper alloy with capstan heads, chromium plated, screwed down high pressure complete all as specified and directed. Make Cera F2002104, Hindware F400005CP, jaquar OPP-CHR-15001PM

S & F in repair bib tap fancy type long shank cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or brass ferrule 15 mm dia pipe complete all as specified and as directed. Make Hindware F57006CP, Jaquar ARI-CHR-39037, Cera F1015151, Prayag 7808

S & F in repair stop valves / angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed

S & F in repair tubular towel rail 20 mm dia D type brass chrormium plated 600 mm long between flanges complete all as specified and as directed.

S & F in repair PVC connection of 15mm size 450 mm length including brass nuts complete all as specified and as directed

S & F in repair fancy type brass chromium plated soap dish of 160 x 160 x 90 mm complete all as specified and directed. Make Parryware T6902A1, Cera F5014106CH

S & F in repair fancy type glass corner 300 mm radius of 6 to 8 mm thick toughened glass with CP railing fixed with fancy type screws complete all as specified and directed. Make Parryware Cat No T6010A1, Cera Cat No F5005102, Jaquar Cat No.ACN-CHR-1173

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc, Plastic water closet seat white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F Vitreous china water closet squatting pan “Orissa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe (excluding flush pipe and flushing cistern) all as spd but fixed in repair. complete all as specified and directed.

S & F in repair PVC low level flushing cistern 10 litres, valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repair Vitreous China Wash hand basin white flat back of size 550 x 400 mm including brackets, waste coupling 32mm dia and waste pipe complete all as specified and directed.

Dismantling of cast iron / PVC / AC / SGSW pipes alongwith fittings and accessories upto 100 mm dia jointed in cement mortar and taking out of walls, floors or trenches, if required complete all as specified and directed.

S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls including fixing with clamps.

S&F 75 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls including fixing with clamps.

PVC (SWR) bends any radius for 110 mm bore pipe

PVC (SWR) bends any radius for 75 mm bore pipe

S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent incl 100 mm dia CP NT cover complete cement

S&F in repair 20mm dia Ball valves standard of PTMT any colour high pressure with epoxy coated aluminium rod & high density plastic ball screwed, for iron pipe and fixed.(Minimum weight 20mm - 210gms complete all as specified and directed

Dismantling wrought iron / Mild Steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed

S & F MS joist channel, angle, tee section, MS tubes, flats, square bars etc fixed indepently or framed or without connecting plates, for monkey proofing, cooler stand, iron ladder fixed upto triple storey bldg of grade Fe 410-W Gde E-250 Quality A complete all as specified and directed

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any

S&F for Expanded metal in available size weight not exc. 4.00 kg per Sqm complete all as specified and directed.

M & L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed

M & L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall, landing, balconies, canopies, deck slabs and in shelves and like in repair to Chajjas, Claddings, soffits etc including bonding agent, complete all as specified and directed. Note:- Reinforcement shall be measured & paid under respective items.

M & L for form work to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete flat, complete all as specified and directed.

M & L for providing pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab and man hole covers etc set CM (1:6) complete all as specified and directed.

M & L mild steel TMT bars 6 to 8mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed

Dismantling of asbestos cement (Corrugated, semi corrugated etc) sheeting in roof covering all as specified and directed by Engineer-in-Charge.

S & F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S & F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S & F in repair for roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde E-250) quality B complete all as specified and directed.

M&L for waterproofing treatment to sunken slab of toilet incl demolition of existing treatment incl removal of debris outside MoD land and cleaning the surface made free of dirt , foreign particles followed by grinding all protrusions to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expansion and contraction. Moistening the prepared surface for proper dispersion and penetration and applying two component cementitious elastomeric waterproofing coating Damp Block 2K manufactured by M/S Asian paint Ltd pidifin 2k (DR Fixit ) or equivalent in two coats @ 1.4 kg/sqm to build 1mm thick as per manufacturer's specifications. the first coats shall be applied @ 0.7 kg/sqm and white first coats is still green the second coats shall be applied with suitable stiff brush @ 0.7 kg/sqm. The treatment shall be carried out to entire horizontal surface and upto 450mm vertical walls. Perform air cooling for approx 4hrs followed by continuous water cooling at least 48 hrs. Ponding test :- After water proofing treatment has cured, perform a ponding test to verify its effectiveness. Block all outlets and fill the sunken area with water. the test should run for 48 hrs ( or 7days as per IS 3370 PART- I ) Necessary record of the test duly signed by Engr-in-charge shall be kept on record. Inspection :- Inspect the soffit for any sign of leakage of dampness, if leaks are detected, the area must be repaired and the test repeated. Protective screed:- Once the ponding test is successful drain out the water and apply a protective plaster of 20mm thick using CM 1:3 with water proofing compound to a required slope towards the spouts provided incl vertical surfaces. Back filling :- After protective screed has dried , back fill the remaining sunken depth with light weight, non absorbent material such as pumica stone pr broken bricks, avoid using water retaining material Final layer:- 50mm thick layer of pcc 1:2:4 type B1 shall be laid over light weight filling to provide the floor finish. Plumbing fixture shall be the required slope.

Taking down copper/aluminium point wiring of any description and any position (light, fan, socket or power point) complete, including fixture and fittings such as switches, socket, ceiling rose, lamp holder, pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified.

Taking down Aluminium sub main wiring and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and as directed

M&L of point wiring with 1100 volt grade PVC insulated and unsheathed 1.5 Sq mm (FRLSH) multistranded copper conductor cable with continuous earth wire of 1.5 Sq mm (FRLSH) multistranded copper conductor cable PVC insulated and unsheathed, drawn in & including concealed/surface with PVC rigid conduit medium grade with fittings (ISI marked) not less than 20 mm dia & 1.6 mm thick sunken pressed steel galvanised terminal boxes with top cover ISI marked plastic laminated hylam sheet for housing/ fixing switches etc complete all as specified and directed for the following- Note- (i) The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour. (a) One light/ holder/fan/exhaust/bell point controlled by one switch.

(b) One 5 pin 5 Amp switch socket combination point on an same board.

(c) One 5 pin 5 Amp switch socket combination point on an independent board with 2.5 Sqmm FRLSH unsheathed copper conductor single core multistranded.

All as per item 94 here in before but for one 15 Amp 6 Pin switch socket combination independent with 4.0 Sqmm FRLSH unsheathed copper conductor single core multistranded complete all as specified.

S&F of Switch Piano flush type 5 Amp single pole one way.

S&F of switch socket combination 2 in 1 flush type 5 Amp 5 Pin

S&F of switch socket combination 5 in 1, 15 Amp flush type

S&F of electronic fan regulator 5 stepped type complete all as specified and directed

S&F of ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.

S&F of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings

M&L for sub main wiring with two single core 6.0 Sqmm FRLSH copper conductor PVC insulated and unsheathed cable including PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 6.0 Sqmm FRLSH insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. (Note :- Two runs of 6.0 sqmm FRLSH and one run of 6.0 sqmm FRLSH copper conductor shall be measured as one unit length.)

M&L for sub main wiring with two single core 4.0 Sqmm FRLS copper conductor PVC insulated and unsheathed cable including PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 4.0 Sqmm FRLS insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. (Note :- Two runs of 4.0 sqmm FRLS and one run of 4.0 sqmm FRLS copper conductor shall be measured as one unit length.)

Supply and fixing of VTPN DB 12 way suitable for Mounting MCCB as Incomer of rating 200 Amp Vertical distribution board with suitable rated bus bar having IP-43 protection and double metal door concealed in wall including connection as required complete all as specified & directed.

Supply and fixing of MCB distribution board SPN 240 Volt 12 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection as required complete all as specified & directed.

Supply and fixing of MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection as required complete all as specified & directed.

S&F of MCCB 100 Amp, 16KA, 4 Pole including complete electrical connection complete all as specified and directed

S&F of MCB SPN 32-40 Amp, 10 KA, 240 volt 'C' curve complete all as specified and directed.

S&F of MCB of MCB SP 10 to 32 Amp 240 Volt 'C' curve 10 KA complete all as specified and directed.

S&F of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps

S&F of LED lights fitting 4 Ft, 20W, 220V, AC, batten type, including LED tube light connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete.

S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC batten type including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and directed

S&F LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S&F round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

S & F Building security LED Light 30 Watt made up pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC having top opening separate driver compartment with IP-66 protection and impact resistance of IK 07 for building secuity purpose with bracket size made of GI pipe medium grade 32 mm dia 1.5 mtr long bend to shape as required and fixing with two nos MS Clamp of size 40x6 mm for fixing of building security light fittings completed all as specified and directed.

S & F of LED lamp 9 watt B22 completed all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly into ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to GI earth wire of size 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electricl plate No.3 connected to earthing test point all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh but without earth lead protection pipe and test on completion after dismantling unserviceable earthing complete all as directed including dismantling of existing earthing. Note:- On testing after completion if desired earth resistence is not obtained the earthing will be redone at no extra cost.

Please Enable Macros to View BoQ information