SPL REPAIR TO BLDG NO P 439 01 08, OR MD ACCN BLOCK AT OLD HAIG LINES UNDER THE AOR OF GE DEVLALI

Amount

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sqm each complete all as specified.

S & F factory made pressed steel door frames of size 105 mm x 60 mm and 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs /hold fast duly tarred with bitumen and sanding with sharp clean sand, incl mild steel medium weight 03 nos 100mm long hinges, lock strike plate, complete all as spd and directed including filling with cement concrete type B-0 1:2:4 using 12.50 mm graded stone aggregate as in filling of chowkats hollow of frame with plain cement concrete and hold fast complete.

S & F factory made pressed steel frames of size 125 mm x 60 mm 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, incl 03 nos mild steel medium weight 100mm long hinges, lock strike plate, complete all as spd and directed including filling of cement concrete type B-0 1:2:4 using 12.50 mm graded stone aggregate as in filling hollow of frame with plain cement concrete and hold fast complete .

S & F for 35mm thick factory made flush shutter, solid core construction, with particle board core and plywood face panels ,commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed.

M & L for decorative laminate type-I, of surface finish, colour and pattern as approved fixed with approved adhessive as per makers instruction, 0.9mm thick laminate complete all as specified and as directed.

S & F for 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze, devided into 3-4 panels etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) complete all as specified and as directed.

S & F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed.

S & F powder coated aluminium sliding window, three track shutters with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, aluminium three track chowkhats, aluminium snap beading, screws, suitable handle etc with and including black tinted sheet glass of 4 mm thick and incl stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm, sliding window shutters aluminium sections weighing not less than 0.55 kg/m and size of three track chowkat, thickness of aluminium member shall not be less than 1.40 mm thick complete all as specified and directed and fixed .

S & F for powder coated aluminium ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frosted glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in quoted rates). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan

S&F 30 mm thick moulded Prelaminated both side WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on both side with wood grain texture both side with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately)

S&F 100 mm long butt hinges stainless steel complete fixed with full body threaded Star headed counter sunk SS screws all as specified and as directed.

S & F Aluminum Anodised 150mm size barrel tower bolt with bright bolt complete all as specified and as directed.

S & F 150mm size aluminum adodised handles complete all as specified and as directed.

S & F for 300mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F for aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and as directed.

S&F mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding to pressed steel chowkats omplete all as specified and as directed.

S&F for MS framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.

S & F framed work such as in door frame, door shuters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified.

S&F in repair 25mm dia 1 to 1.5mm thick stainless steel curtain rod with fancy type incl brackets, stops, rollers, sides knobs /glove funnel etc. complete all as specified and directed by Engr-in-charge.

M & L for fabrication & fixing to horizontal & vertical shelves/ partations /sides/ top/ bottom/back sides etc for Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 18 mm thick HDHMR boards (Water/termite proof) with white laminated colour on both sides, of approved quality including paste to all exposed edge by edge Binding Tape to match the colour of board including provision of cabinet for keeping baskets/ drawers etc and including taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid)

M & L for Fabrication & fixing to front side /all exposed sides of Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 18 mm thick HDHMR UV, glossy/maat finish boards front side and other side white UV boards edges duly bonded with PVC taping to match the colour of UV boards all around including provision of cabinet for keeping baskets/ drawers etc and including taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid)

S & F Continuous (piano) hinges, stainless steel, width of flap 30mm complete all as specified and as directed.

S&F Stainless steel Z type hinges 100 mm long medium weight fixed with SS star headed screw complete all as spd and directed as in Kitchen cabinet cupboard shutters all as spd and directed.

S & F 150 mm size designer handel stainless steel cromimum plated for Cabinet/Wall Unit/Overhead Unit/Wardrobe etc complete all as specified and as directed.

S & F for Magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified.

S & F Stainless steel basket (plain) of size 500mm x 370mm x 100mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.

S&F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of SS Grade 304 with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.Make :Hettich, Hafele, Butterfly

S&F chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.Make : Hettich, Hafele, Butterfly

S&F chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304 with necessary sliding channel frame structure, fixing clips etc. complete in all respect as specified and as directed by engineer- in - charge. Make : Hettich, Hafele, Butterfly

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and directed by Engineer-in-Charge.

M&L for non skid ceramic tiles of size 7 to 8mm thick joint free (coloured) (Square/rectangular) of size 600mmx600mm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

All as per Sl item No 34 above but in skirting of size 600mmx100mm over 10mm thick backing coat in CM (1:4) complete all as specified and directed.

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for Glazed ceramic tiles of size 300 mm x 450 mm x 7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4) and pointed in coloured cement to match the colour of tile complete all as specified and directed.

M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) size of tile 300mmx300mm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L machine cut cudappa stone slab 20-22 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Granite (of any type) 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15mm thick screed bed in CM (1:6), complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

Taking down cement plaster of any description, any thickness from surfaces of walls/soffits of roof projections & chajjas /ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified and as directed.

M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified.

M & L rendering 10 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and smooth without using extra cement including complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed.

M&L preparation of new plastered surface of walls and applying two coats of oil bound distemper over 1.5mm thick wall care putty over one coat of chalk whitening primer complete all as spd and directed.

M & L for preparation of new plastered surface of wall/fins/facia/chajjas etc and applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives over a coat of exterior primer, exterior weather proof offer anti alge high performance exterior wall finish any colour/ tint complete all as specified and directed. Make: Asian (apex ultima), Berger (wather coat), nerolac (excel total).

M&L for preparation of New or previously untreated wood and wood based surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M & L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

S & F 16mm dia CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fixed to walls and ceilings with adequate nos of clamps or laid in floor/walls including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC & BRASS fittings such as (elbow, tee, socket, reducer, nipple, union, bushing, step over bends, end cap, end plugs, male/female threaded adaptor, flange, tank adaptor) and any other fittings required for fixing of sanitary/plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC & BRASS fittings)

S & F 20mm dia CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fixed to walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC & BRASS fittings such as (elbow, tee, socket, reducer, nipple, union, bushing, step over bends, end cap, end plugs, male/female threaded adaptor, flange, tank adaptor) and any other fittings required for fixing of sanitary/plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC & BRASS fittings)

S & F 25mm dia CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fixed to walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC & BRASS fittings such as (elbow, tee, socket, reducer, nipple, union, bushing, step over bends, end cap, end plugs, male/female threaded adaptor, flange, tank adaptor) and any other fittings required for fixing of sanitary/plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC & BRASS fittings)

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S&F in repairs 20mm bore CPVC gate valves screwd both ends for CPVC pipes complete all as specified and directed.

S & F in repairs Stainless steel Plate rack of size 750mm x 900mm x 250mm deep of sheet thickness 1mm, complete all as specified and as directed.

S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap / 'P" Trap , including seat cover with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed.

S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed.

S & F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repairs wash hand basins, vitreous china,of size 550x400mm with padestal (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe etc complete all as specified and as directed.

S & F in repair for 15 mm bore, fancy type, Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange and including Telephone Shower complete all as specified and as directed by Engr-in-Charge Make Jaguar Cat Part No: FLR-5281N, Hand shower HSH 1715, flexible tube SHA-549D12 or equivalent in kohlar, grohe and Roca.

S&F in repair Overhead Shower 120mm round shape, Single Flow (Face Plate Stainless Steel and ABS body with Chrome Finish) with Rubit Cleaning System including shower arm of size 190mm long flat shape for wall mounted shower with flenge complete all as specified and directed. Make Jaquar Cat Part No. OHS-1663 & SHA483 or equivalent in kohlar, grohe and Roca.

S&F in repair brass chromium plated SS single towel rail 600mm long Cat Part No. CAN-1111SM of Jaquar or or equivalent in kohlar, grohe and Roca.

S & F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No FLR- 5047 N of Jaquar or equivalent in kohlar, grohe and Roca

S&F in repairs 15mm bore CP central hole basin mixer with regular spout without popup waste system with 450mm long braided hoses, 20mm Cartridge size complete all as specified and as directed. Make Jaquar Cat Part No. FLR-5167NB or equivalent in kohar, grohe and Roca.

S&F in repair Health Faucet (ABS Body) with 1.20 M Long PVC Tube and wall Hook screwed down to GI pipe or union/angle valve complete all as specified and directed by Engr-in-charge Make Jaquar Code No- ALD-CHR-583 or equivalent in kohlar, grohe and Roca

S & F in repair 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No FLR-5053 N of Jaquar or equivalent in kohlar, grohe and Roca

S & F in repair CP, soap dish complete all as specified and as directed by Engr-in-Charge. Make Jaquar Code No- AKP -35731 P or equivalent in kohlar, grohe and Roca

S & F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repairs 15mm bore CP Sink mixer with regular swinging spout (Wall mounted model) with connecting legs and wall flenge complete all as specified and as directed. Make Jaquar Cat Part No. FLR-5309N or equivalent in kohlar, grohe and Roca.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories

S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including fixing stac clamps complete all as specified and as directed.

S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors incl fixing stack clamps complete all as specified and as directed.

S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F PVC (SWR) bend with access door any radius 110mm complete all as specified and directed.

S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed.

S&F forn110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F PVC (SWR) bend any radius 75mm complete all as specified and directed.

S&F PVC (SWR) bend any radius 110mm complete all as specified and directed.

S & F in repair PVC (SWR) floor trap 75 mm bore plain with grating including jointing with solvent cement and fitting complete all as spd and directed.

M & L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, incl replacement of floor trap 75 mm bore with CP grating, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, for Bath, WC area complete all as specified and as directed.

M & L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc,incl replacement of floor trap 75 mm bore with CP grating complete , and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, for kitchen or area of floor upto 0.50 Sqm complete all as specified and as directed.

M & L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat : SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer including taking down existing roof treatment of any type and also taking down cement plaster on brick/concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed. Make: Asian Paints or equivalent in Sikka, Fosroc and STP Ltd. Note : The application shall be executed on any type of surface and on horizontal/Vertical areas.

M & L providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger/ Nerolac/STP Ltd.Notes: (1) The work shall be executed through authorised applicator of manufacturer only.(2) Authrised Applicator shall be approved by GE before starting of work. (3) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material.

M&L for chequered cement concrete tiles 30cmx30cmx20mm thick Rubber moulded with grey cement and pigment, over and including 15mm thick screed in CM (1:6), set jointed & pointed in neat cement slurry in floors complete all as specified and as directed.

M&L for precast cement concrete interlocking tiles 60mm thick Rubber moulded with strength 30 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in sub base or under floor etc complete all as spd and directed.

Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.

Dismantling timber scantlings (Purlins/Rafters/vertical poles) any sec and size, in any position complete all as specified and as directed.

M & L for Mild steel rolled sections Fe-410-W (Gde-E-250) as in Compound girders and stanchions, lattice girders, aerial masts, hollow pipes any sec for shed etc, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc complete all as specified and as directed.

S & F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of Plain or corrugated AC Sheet, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work.

M & L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in chajjas or kitchen platform or etc complete all as specified and as directed..

Formwork to chullah hoods, chajjas, troughs and similar items including edges, flat rough finished surfaces of concrete

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.

Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed.

Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.

Demolition and breaking up drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar for 150mm to 300mm dia pipe, and removal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed.

M & L for 150 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenches and tested complete all as specified and as directed.

M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 150 mm bore incl forming cradles complte all as specified and directed.

M&L for Plain Cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in lintels up to 1.5 metre clear span, bed blocks, copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork, complete including demolition of existing coping all as specified and as directed.

Taking down unserviceable carefully copper/aluminium point wiring (light, fan, socket or power) complete with teak wood battens including fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc. but excluding fan regulators, tube light fittings and sketch fittings and making good disturbed surfaces of walls, floor etc.complete all as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girthin stone concrete or stone walls.

Point wiring complete with 1.5 Sqmm (nominal area) unsheathed multistranded FRLS copper conductor in PVC concealed conduit including fittings and accessories with one run of continuous PVC insulated stranded FRLS copper cable conductor of same size as in phase/neutral cable connecting to common earth dolly including sunken terminal box and plastic laminated sheet top cover for mounting of switches, sockets, regulators etc. for one light point, bell point controlled by one switch , fan point controlled by one switch through regulator complete all as specified and directed for following:- (a) One light point controlled by one switch.

One fan point / Exhaust fan point controlled by one switch

One 3 pin socket outlet. 5 Amps on the same board.

One 3 pin socket outlet. 5 Amps on the independent. board

One bell/ buzzer point controlled by one push button

One light point contro?lled by two 2-way switches

All as item No- 115.01 above but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire.

Supply and fix switch piano flush type single pole one way 5 Amps complete all as specied .

Supply and fix switch piano flush type single pole 2 way 5 Amps complete all as specied .

Supply and fix Bell push button SP 5 Amp, flush type complete all as specified .

Supply and fix Bell electric AC 230 Volts single pole ding dong type complete all as specified and as directed.

Supply and fix switch socket combination 3 pin 6 Amps flush type (multi purpose ) complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, 3 pin, 6 and 16 amp flush type universal complete all as specified and as directed.

Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S & F of lamp angle/batten holder Bakelite Watt complete all as specified and as directed.

S&F in replacement LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCA sheet with snap on installer sutable for double side connection LED tube in and including batten and tube etc complete in all respect.

S & F Decorative wall light fixture made up of Polycarbonate, suitable for and including 9 W retrofit LED Lamp B22 base..

Supply and fix fan regulator 100 watts electronic type for ceiling fan of size 900 mm to 1400 mm sweep working on 230 Volts AC supply with all necessary connections etc complete all as specified and as directed.

Supply and fix sheet metal enclosure DBs SPN 8 way, double door, 240V with 200 Amps rated bus bars complete all as specified and as directed.

Supply and fix MCB SP 5 to 32 Amps, 240 volts complete all as specified and as directed.

Supply and fix MCB SPN 32 to 40 Amps, 240 volts complete all as specified and as directed.

M & L sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRLS cable 1100 Volts grade incl 6.0 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLS as continuous earth wire and connecting to common earth terminals complete all as specified and directed in PVC conduits Note :-(i) Two run of copper cable and one run of earth wire and PVC conduit shall be measured as one length.

M & L for bracket made out of GI tubing 32 mm dia,light grade 0.75 mtr long including fixing with MS clamps -2 Nos made out of 25 mm wide 2.5 mm thick flat iron with M.S nuts bolts -04 Nos with flat washer 3mm thick for each including painting with aluminium paint over one coat of red oxide to the M.S clamps & bracket etc complete all as directed at site.

S&F ENDURA PEARL 25 W MP New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07

"M&L earthing GI 4mm GI wire complete with galvanized steel plate electrode 600 mm x 600 mm x 6.0 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI wire 4 mm size by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of strata, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified.

S & F Plug & socket enclosure in sheet metal enclosure with 20A SP MCB complete all as specified and as directed (in 240 V)

Taking down care fully ceiling fans 1200 mm to 1400 mm sweep, keeping in safe custody painting with 2 coats of white enameled paint & refixing the same after completion of B/R work all as specified and as directed( Note: minor accessories like capacitors, flexible wire , connector & hanging clamps with rubber bush and 02 Nos nut and bolts is deemed to be included in rate quoted)

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm. (cuting hole in wall for instalation of exhaust fan is deemed to be included in rate quoted)

Supply,install, testing & commissioning of factory made LT panel wall mounted board made out of CRCA sheet 2 mm thick indoor type toltally enclosed weather,dust and vermin proof compartment type with front hinged door and locking arrengement mounted on M S flat iron clamp welded to panel body duly grouted on wall 415 V, 3 phase, 4 wire AC, 50 Hz having aluminium bus bar 160 Amps for pfase-03 Nos & neutral- 01 No with 02 Nos Earth Terminals. insulated with PVC sleeves, space for fixing single phse KWH Emergy meter 04 Nos 40x40x6 mm size angle iron hold fast, fastener bolts, copper lugs, spacers channels,rubber gaskets, locking knob, hylem sheet piece,PVC shrinkable sleeves, nut and bolts, washers etc suitable single core copper wire connectors, suitable compartments and epoxy power spray paint with primer complete all as specified including the following accessories including taking down old unservicable LT panel board

INCOMING- a) MCCB 415 V 4 POLE 18 KA breaking capacity of 63 Amps- 01 No b) R-Y-B phase LED indicating lamp-03 Nos OUTGOING- a) MCB SPN 32Amps, 230V, 10 KA, C curve - 05 Nos b) Providing space for and refixing existing single phase KWH electric enery meter-04 Ns c) Copper wire 6 Sqmm wire and open terminals for all meters totaly pre wired. d) Glass windows for all meter for taking meter reading Note:- 1. Cost of taking down electric meters from old unserviceable penel board keeping in safe custody, and refixing the same electric meters in new panel is deemed to be includede in rate quoted.

Note: Amount of sch of credit of Rs.86550/-will be deducted from total amount of BOQ.

M/s M R MAHANA (BID ID -3367132)

M/S SAMEER SUBHASH PATANI (BID ID -3367003)

JEET CONSTRUCTIONS CO. (BID ID -3366538)

Samruddhi Construction (BID ID -3367250)

M/s. JBSR ENTERPRISES. (BID ID -3366183)

J Sams Contructions (BID ID -3367577)

Vinod Enterprises (BID ID -3367384)

Alpha Construction (BID ID -3367074)