PLENARY B/R WORK OF OTM ACCN VARIOUS UNITS OF 508 ABW, CHHEOKI MIL STN UNDER GE (WEST ) PRAYAGRAJ

Amount

Dismantling of AC sheet corrugated/semi corrugated sheets in wall cladding or in roof covering complete all as specified and directed.

S&F 6 mm thick asbestos cement corrugated or semi corrugated sheets as in roofs, walls etc. fixed with 'L' type or 'J' type hooks or cranked hook bolts complete all as specified and directed.

S& F 6mm thick asbestos cement two piece serrated ridges for corrugated or semi corrugated sheet fixed with L hook or J hooks or cranked hook bolts complete all as specified and directed

Dismantling plain or corrugated steel sheeting ,any gauge ,thickness including Nainital or similar pattern roof covering

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete as specified and as directed

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and as directed

M&L for repairing cracks, leaks and other joints prone to leakage, prior to repair, the water storage portion is thoroughly cleaned of dirt, oil and other loose material and the entire surface treated with waterproofing compound complete all as specified & directed Note:- Waterproofing compound shall be measured and paid separately under respective item.

Supply only water proofing compound complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M& L for 25mm thick cement concrete 1:2: 4 type B-0 using 12.5 mm stone aggregate as in floor complete all as specified and directed.

M&L Non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed.

M&L for First or premium quality of glazed ceramic coloured tiles 350x250x7mm/ 450x350x7mm thick, in vertical surfaces like skirting, dados, risers to steps, etc and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.

M&L Non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for Vitrified Ceramic light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F vitrified tiles, light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in vertical surfaces such as Dado/Skirting etc. set and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing with solvent on to wall to make PVC frame as per specifications complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

S&F in repairs flushing jet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts, complete all as specified and directed.

S&F in repair bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc and removing rubbish complete all as specified and directed.

M&L for brick work with subclass B bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debris upto a distance of maximum 500m complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on internal surfaces of brick or concrete work surface of wall and finished the surface even and fair without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick or concrete work surface of wall and finished surface even and fair without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick in CM 1:3 on ceiling surfaces to be finished even and smooth without using extra cement complete as all specified and directed by Engineer-in-Charge

M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

M & L for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whitening on plastered surfaces complete all as specified and directed.

Taking down shutters of any description exc. 1.0 Sqm but not exc. 2.0 Sqm each leaf complete all as specified and directed.

Refixing shutters of any description exceeding 1.0 Sqm but not exc. 2.0 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware and renewal of unserviceable screws complete all as specified & directed.

M&L for 30 mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 30 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open repeated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24(a) and for door and fixed with chowkats,chemically pressure treated complete all as specified and directed.

S&F 30mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face with particle board core complete all as specified and directed.

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS;1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed.

Taking down and refixing of aluminium door double or single leaf shutters after repairing, tightening of all loose joints and replacing rubber beading ,floor spring as required and pivot top hinges, size of door exceeding 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. Note : Floor spring and pivot hinge shall be measured and paid separately under respective item.

S&F 100mm size, 4 lever, brass mortice lock for aluminium door lock including duplicate key complete all as specified and directed.

Supply only aluminium door shutter pivot complete all as specified and directed.

S&F floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and directed.

S&F in repair floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and directed.

S&F in repair 25mm dia aluminium powder coated, curtain rails/ drapery rod including end brackets and end knobs, stops, rollers complete all as specified and directed.

S&F butt hinges extruded aluminium alloy with galvanised mild steel pin type B-21 of size 100mm including welding etc complete all as specified and directed.

S&F 150mm long aluminum anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.

S&F 100mm long aluminum anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.

S&F 125mm size extruded aluminum alloy handle, fabricated type, anodised, fixed with screws complete all as specified and directed.

S&F 100 mm size extruded aluminum alloy handle, fabricated type, anodised, fixed with screws complete all as specified and directed.

S&F in repair butt hinges, 100 mm size medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repair butt hinges, 75 mm size medium weight, cold rolled mild steel complete all as specified and directed.

S&F mild steel pressed handle oval type stove enamelled black 150 mm size complete all as specified and directed.

S&F mild steel pressed handle oval type stove enamelled black 125 mm size complete all as specified and directed.

S&F 150mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 100mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S& f in repair 300mm long aluminium alloy anodised sliding door bolts, with hasp staple ( bolt type) and fixing clips of sheet cast or extruded or cast aluminium alloy complete all as specified.

S&F in repair 75 mm hasp and staple safety type mild steel , wire type stove enamelled black, including bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F galvanised mild steel wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stain less steel cover fixed to aluminium doors complete all as specified.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with wooden beads complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for 3mm thick figured (one side) glass ordinary quality and glazing with oil putty or wooden beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

Securing glass of any description in existing wooden frames glazed with putty/beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, re puttying and painting/oiling puttied surface to match existing work complete all as specified and directed

M&L for 5.5mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for preparation of new wood or wooden based surfaces of any description, not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair vitreous china wash down water closed pan, Pedestal pattern with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.

S&F in repair vitreous china premium/ First quality wash down water closet wall hung EWC white/ ivory/off white closed pattern including all necessary accessories like rag bolt, gel gasket etc.( excluding flushing cistern & flush pipe) complete in all respect all as specified and directed.

S&F in repair plastic water closet seat cover black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe etc complete all as specified and as directed.

S&F in repair PVC valve less symphonic action flushing cistern 10 ltrs capacity with all accessories low level white with inlet ball valve, float & handle and connection pipe, flush pipe including bracket complete all as specified and as directed

S&F in repair vitreous china wash basin, white, flat back type of size 550x400mm including brackets and cutting for and pinning in ends of brackets in CM 1:3 including 32mm dia chromium plated waste coupling and 32 mm dia PVC waste pipe 450 mm long complete all as specified and directed. Make:- Cat Part No-ALD 705 of Jaguar or Equivalent make as specified in P.S.

S&F in repair vitreous China urinals size 465x355x265mm, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; , flush pipe, grating and Union for discharge pipe 32mm dia complete all as specified and directed.

S& F in repair vitreous china urinal half stall type ( flat back) of size 635x395x420mm, white with grating and union for discharge pipe ( excluding flushing cistern including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2 complete all as specified and directed.

S&F in repair of health faucet (ABS) mild steel chromium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed.

S & F PVC connection 15mm bore 60cm long with brass union at each end complete all as specified and directed.

S& F PVC connection 15mm bore 450cm long with brass union at each end complete all as specified and directed.

S & F stop valve cast copper alloy with butterfly or crutch handle, screwed down, high pressure with screwed both ends for iron pipes or for unions, 15 mm dia of pipe complete all as specified and directed.

S&F stop valve cast copper alloy with butterfly or crutch handle, screwed down, high pressure with screwed both ends for iron pipes or for unions, 20mm dia of pipe complete all as specified and directed.

S&F soap dish disc (oval) type of stainless steel chromium plated including Chromium plated brass screws and wooden / plastic cleats , complete all as specified and as directed.

S&F in repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed.

S&F 15mm bore pillar taps cast copper alloy CP , long neck with aerator , screwed down high pressure fancy type with or without lettered Hot or Cold with long screwed shanks and fly nuts complete all as specified and directed.

S&F toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repair sheet glass shelf assembly 60cm long, 12cm wide, made out of 5.5 mm thick glass with CP bracket guard and railing, fancy type, fixed to plug with CP screws and cup washer complete all as specified and directed.

S&F in repair low density polythene pipe (LDPE) of pressure rating 6 kg/sq cm,32mm bore for waste pipe of wash hand basin complete all as specified and directed.

S&F in repair low density polythene pipe (LDPE) of pressure rating 6 kg/sq cm,40mm bore for waste pipe of wash hand basin complete all as specified and directed.

S& F in repair hand shower chromium plated shower in bore of 15 mm dia pipe complete all as specified and directed.

S&F in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore fancy type and fixed (Minimum weight 15mm 105 gms) complete all as specified and directed.

S&F in repair bib tap , Long body of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed (Minimum weight 15mm 120gms) complete all as specified and directed.

S&F in repair CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, fancy type, superior quality, fixed with screws complete all as specified and directed.

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe in the bore of 15mm dia pipe complete all as specified and directed.

S&F in repair brass CP centre hole mixer for mixing hot & cold water screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe 15mm bore for WHB complete all as specified and directed.

S& F in repairs wall mixer with provision for over head showers fancy with 115 mm long bend pipe on upper side connecting legs and wall flanges complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm size, shower arm with swivel joints complete all as specified and directed.

Taking up or down 15mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

Taking up or down 20mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exceeding 10cm girth in brick walls complete all as specified and directed.

Dismantling water tanks capacity exceeding 250 Ltr & n exceeding 500 Ltr and removing to store complete all as specified and directed.

Dismantling water tanks capacity exceeding 500 ltr & not exceeding 1000 ltr and removing to store complete all as specified and directed.

S&F rotational moulded, multilayer HDPE water storage tank of 1000 ltrs capacity (Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank nipple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minimum weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F rotational moulded, multilayer HDPE water storage tank of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank nipple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minimum weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

M & L for Cleaning and removing all scale and dirt, etc, from tanks capacity exceeding 250 & not exceeding 500 litres and from mouths of circulating pipes, etc complete all as specified and directed.

M & L for Cleaning and removing all scale and dirt, etc, from tanks capacity exceeding 500 & not exceeding 1000 litres and from mouths of circulating pipes, etc complete all as specified and directed.

S&F in repairs Ball Valves 20mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified and directed.

Taking down rolling steel shutters of any size and thickness complete all as specified and directed.

S&F steel rolling shutters 1.25mm thickness without ball bearing, push or pull or manual type including top cover, anchoring rod, hasp and staple and apply one shop coat of primer complete all as specified and directed.

Taking down old unserviceable rolling shutters (upto 3 Mtr height) and complete oiling/ greasing to the shutters with channels and gear box etc with changing of minor parts like springs/rods, safety lever lock & ball bearing etc are required to make for smooth functioning by push and pull method or otherwise and refixing the same after replacing minor parts complete all as specified and directed. Note:- Cost of replaced parts like springs/rods, safety lever lock & ball bearing of rolling shutter shall be deemed to be included in this item. Bidders to quote their rate accordingly

Taking down old unserviceable rolling shutters (height 3mtr to 6mtr) andcomplete oiling/ greasing to the shutters with channels and gear box etc with changing of minor parts like springs/rods, safety lever lock & ball bearing etc are required to make for smooth functioning by push and pull method or otherwise and refixing the same after replacing minor parts complete all as specified and directed. Note:- Cost of replaced parts like springs/rods, safety lever lock & ball bearing of rolling shutter shall be deemed to be included in this item. Bidders to quote their rate accordingly

Schedule of Credit (MINUS) Rs. 90,500.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum

Vibha Enterprises

M/S Akhilesh Enterprises

Airways Enterprises

Vijay Builders

SUNIL ENTERPRISES