90/2020-21 of SE GCC CBE

Amount

Earth work excavation in hard gravelly soil, stiff black cotton soil, hard red earth shales, murram, gravel, stoney earth mixed with small size boulders etc., complete as per standard specification for Foundation.

Earth work excavating and depositing on bank with initial lead of 10m and initial llift of 2.0m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting, as per standard specification, etc., complete for foundation.

Plain cement concrete in 1:3 :6 using 20 mm HBG metal, including cost of cement, all materials, labour charges, curing, leads, lifts, as per standard specification etc., complete.

RCC in 1:1 1/2:3, mix using 12 to 20 mm HBG machine crushed metal for raft concrete without form work including cost of cement, all materials labour, curing, all leads & lifts, vibrating charges, as per standard specification, etc., complete. ( but excluding cost of steel reinforcement)

RCC in 1:1 1/2:3, mix using 12 to 20 mm HBG machine crushed metal for culvert slab with form work including cost of cement, all materials labour, curing, all leads & lifts, vibrating charges, shuttering arrangements as per standard specification, etc., complete. ( but excluding cost of steel reinforcement)

RCC in 1:1 1/2:3, mix using 12 to 20 mm HBG machine crushed metal for cable duct cover slab with form work including cost of cement, all materials labour, curing, all leads & lifts, vibrating charges, shuttering arrangements as per standard specification, etc., complete. ( but excluding cost of steel reinforcement)

RCC in 1:1 1/2:3, mix using 12 to 20 mm HBG machine crushed metal for cable duct side wall with form work including cost of cement, all materials labour, curing, all leads & lifts, vibrating charges, shuttering arrangements as per standard specification, etc., complete. ( but excluding cost of steel reinforcement)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for Sunshade-0.60M width including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

RCC in 1:1 1/2:3, mix using 12 to 20 mm HBG machine crushed metal for Pump room slab with form work including cost of cement, all materials labour, curing, all leads & lifts, vibrating charges, shuttering arrangements as per standard specification, etc., complete. ( but excluding cost of steel reinforcement)

Brick work in C.M 1:5 using chamber burnt class II bricks, including, cost of cement, all materials, labour, curing, all leads and lifts, etc complete as per Standard Specification.

Providing steel reinforcement MS/RTS rods up to 16 mm dia for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification, etc., complete

Labour charges for cutting GI/MS angles and fixing in cable duct in proper alignment including fabrication charges, labour, lead, lift etc., complete

Labour charges for transporting of all types of cable duct cover slab to working site to curing tank, curing tank to keeping them alignment in position including lead, lift etc., complete

Plastering with CM 1:3, 12mm thick, including cost of cement, labour, curing, all leads and lifts etc., complete. as per standard specification

Colour washing with two coats using cement paint of approved quality and colour over a coat of white cement including through scrapping, clan removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete and including necessary crack filling paste, putty whereever required.

Disposal of excess of surplus earth away in low lying area with a lead of 100m including spreading and levelling, labour, lead, lift etc., complete

Refilling with excavated earth other than sand complying with standard specification including cost of labour, lead, lift etc., complete

Supplying and fixing of Doors (Single leaf) using MS angle 50x50x6mm for door frame and 40x40x6mm for shutter frame and shutter 18 Gauge MS Sheet with stiffners both front and back M.S. Flat of size 32x3mm with 6" hinges heavy duty, all Aluminium anodized fittings, including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour cost of all materials, leads, lifts labour etc.,

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

ARAVIND ASSOCIATES

Vidhyut Nirman Corporation

K.PACHIAPPAN

ASAITHAMBI.M