Loading…
Loading…
Tender ID
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.9 LAWARDED | AWARDED |
Tender Value
₹1.9 L
EMD Value
₹5,750
Closing Date
6 Sept 2025, 10:00 pmClosed
Directorate of Municipal Administration
Improvement of mahalakshmi layout at ward no 01 in kudathini town
DMA/2024-25/OW/WORK_INDENT30568/CALL-6
DMA/2024-25/OW/WORK_INDENT30568/CALL-6
Open
Other Works
Two Tender Document System(Two Cover)
DMA Town Panchayat Kudthini
₹500
₹5,750
21 Aug 2025
21 Aug 2025
8 Sept 2025
29 Aug 2025
Improvement of mahalakshmi layout at ward no 01 in kudathini town
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Formwork shall be added on percentage basis to the finished concrete item rate for Drain formwork shall be considerd as 35% PWD DSR 2023-24 Volume-II Page No. A(7) Item No. 22-2
Fabrication,Supplying,Erection,TestingandCommissioningof. mslong Polygonhig hmast with Single/Multiple telescopic sections having, (minimum over lap distance of 1.5 time sof topsection) thickness as p...
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for
out door luminaries and mounted on Octagonal pole using necessary
bolts, nuts etc., complete(DSR Vol-6 page no.13 of105)
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (Common S...
Supply and Installation/Fixing/Provision of Pole box with HRC Fuse/MCB provision and suitable connector/ terminal for 3Ph/1Ph connections with Loop-In & Loop-Out terminals for 10mm2 /25mm2 3.5 C AI/Ar...
Supplying and drawing Flexible Multicore Cable manufactured with
electrolytic grade flexible copper with low conductor confirming to
IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S .Flat. with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.(Commo...
Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers(COMMON SR 2023-24 PAGE 21 OF 105)
Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suita...
Fixing of .ATPST/ change over switch /Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.(common SR 2023-24 vol-6 page 57 of 105)
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/ panel using necessary nuts, bolts and washers.63 amps(Common SR 2023-24 page 14 of 105)
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .