Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.4 LAccepted-AOC SHAMSHU COMPLEX FORT ROAD LEH LADAKH 194101 | LEH | LEH | LADAKH | 194101 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹22.4 L+₹3,433.83 (0.15%)Rejected-Finance F 402 AMBIKA APARTMENT PLOT A 9 SECTOR 20 NERUL W NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹23.0 L+₹62,489.26 (2.79%)Rejected-Finance MURSTEY COLONY PLOT NO 16 LEH 194101 LADAKH | LEH LADAKH | LADAKH | 194101 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹24.1 L+₹1.7 L (7.51%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹39.8 L+₹17.5 L (78.0%)Rejected-Finance BOGDANG NUBRA PIN 194101 | BOGDANG | NUBRA | LADAKH | 194101 | L5 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | Advait Enterprises L2 | M/S INDUS HIMALAYAN EXPLORERS L1 | Ruhi Construction L4 | M/S SHAMSHER ALI SUFI L3 | MEHDI ALI L5 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Material & Labour for excavation over area in Hard/dense soil n exc 1.5m deep and getting out, complete all as specified and as directed. | 64 | Cum | 350 ₹22,400 | 450 ₹28,800 | 375 ₹24,000 | 299 ₹19,136 | 250 ₹16,000 Lowest |
| 2.00 | Material & Labour for excavation over area in Hard/dense soil exc 1.5m but n exc 3.0m deep and getting out, complete all as specified and as directed. | 45 | Cum | 350 ₹15,750 Lowest | 608 ₹27,360 | 360 ₹16,200 | 550 ₹24,750 | 350 ₹15,750 Lowest |
| 3.00 | Material & Labour for PCC type D-2 (1:4:8) using 40mm graded stone crushed aggregate as mass concrete and filling of foundation, complete all as specified and directed. | 8.5 | Cum | 5,000 ₹42,500 | 5,000 ₹42,500 | 5,000 ₹42,500 | 4,599.99 ₹39,099.92 | 600 ₹5,100 Lowest |
| 4.00 | Material & Labour Pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery with solid blocks, exc 10cm in width and setting in cement mortar 1:6, complete all as specified and as directed. | 85 | Cum | 5,500 ₹4,67,500 | 8,000 ₹6,80,000 | 5,700 ₹4,84,500 | 7,499.99 ₹6,37,499.15 | 500 ₹42,500 Lowest |
| 5.00 | Material & Labour Walling of random rubble stone, uncoursed, masonry, well bonded, laid dry in retaining walls abutments and similar work all as specified and directed. | 20 | Cum | 5,000 ₹1,00,000 | 2,735.27 ₹54,705.46 | 5,000 ₹1,00,000 | 2,399.99 ₹47,999.8 | 750 ₹15,000 Lowest |
| 6.00 | Material & Labour Walling of random rubble stone masonry, uncoursed well bonded, bedded and solidly hearted, built in CM 1:6 all as specified and directed. | 22 | Cum | 5,000 ₹1,10,000 | 4,466.77 ₹98,268.94 | 5,587 ₹1,22,914 | 4,799.89 ₹1,05,597.58 | 1,400 ₹30,800 Lowest |
| 7.00 | Material & Labour for PCC type B1 (1:2:4) using 20 mm graded stone crushed aggregate in coping, mass concrete. complete all as specified and directed. | 2.5 | Cum | 5,000 ₹12,500 | 11,053 ₹27,632.5 | 5,005 ₹12,512.5 | 4,500 ₹11,250 | 120 ₹300 Lowest |
| 8.00 | Material & Labour form work to soffits of suspended flat sabs such as roof slabs, floor slabs, landings and similar works (smooth finished flat surface of concrete) not exceding 200mm thick (Horizontal or sloping), complete all as specified and as directed. | 65 | Sqm | 250 ₹16,250 | 575.65 ₹37,417.25 | 250 ₹16,250 | 300 ₹19,500 | 230 ₹14,950 Lowest |
| 9.00 | Material & Labour form work for rough finished concrete surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and sofits (if any) of foundations and plinth beams and similar works: verticals or to batter | 15 | Sqm | 250 ₹3,750 Lowest | 316.72 ₹4,750.8 | 270 ₹4,050 | 300 ₹4,500 | 542 ₹8,130 |
| 10.00 | Material & Labour form work to fair finshed edges of concrete flats, treads breaks in floors, window cills, concrete failings, openings in concrete walls, floor and roofs n.exe 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide, complete all as specified and as directed. | 75 | RM | 250 ₹18,750 | 89.25 ₹6,693.75 Lowest | 260 ₹19,500 | 200 ₹15,000 | 790 ₹59,250 |
Tender Value
₹24.4 L
EMD Value
₹48,760
Closing Date
22 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 138 WE
CWE, HQ 138 WE
PROVISION OF 02 X SOAKAGE WELLS ALONGWITH 02XSEPTIC TANKS IN UNIT AREA IN THE AOR OF AGE B/R-I AND RETRO REFLECTIVE SIGN BOARDS, ADDN/ALTN OF BLDG NO P-01 AT CORPS OFFRS MESS IN THE AOR OF AGE B/R-II UNDER GE 865 EWS
2025_MES_708471_2
138WE/L-32/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE 865 EWS
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GE 865 EWS
₹48,760
Yes
13 Aug 2025
1 Jul 2025
29 Jul 2025
1 Jul 2025
22 Jul 2025
8 Jul 2025
Amount
Material & Labour for excavation over area in Hard/dense soil n exc 1.5m deep and getting out, complete all as specified and as directed.
Material & Labour for excavation over area in Hard/dense soil exc 1.5m but n exc 3.0m deep and getting out, complete all as specified and as directed.
Material & Labour for PCC type D-2 (1:4:8) using 40mm graded stone crushed aggregate as mass concrete and filling of foundation, complete all as specified and directed.
Material & Labour Pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery with solid blocks, exc 10cm in width and setting in cement mortar 1:6, complete all as specified and as directed.
Material & Labour Walling of random rubble stone, uncoursed, masonry, well bonded, laid dry in retaining walls abutments and similar work all as specified and directed.
Material & Labour Walling of random rubble stone masonry, uncoursed well bonded, bedded and solidly hearted, built in CM 1:6 all as specified and directed.
Material & Labour for PCC type B1 (1:2:4) using 20 mm graded stone crushed aggregate in coping, mass concrete. complete all as specified and directed.
Material & Labour form work to soffits of suspended flat sabs such as roof slabs, floor slabs, landings and similar works (smooth finished flat surface of concrete) not exceding 200mm thick (Horizontal or sloping), complete all as specified and as directed.
Material & Labour form work for rough finished concrete surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and sofits (if any) of foundations and plinth beams and similar works: verticals or to batter
Material & Labour form work to fair finshed edges of concrete flats, treads breaks in floors, window cills, concrete failings, openings in concrete walls, floor and roofs n.exe 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide, complete all as specified and as directed.
Material & Labour RCC type B1 1:2:4, nominal mix (20 mm grade stone crushed aggregate ) in Slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
Material & Labour RCC type B1 1:2:4 (20 mm grade stone crushed aggregate ) in walls retaining walls, ballast walls and the like any thickness, above top of footing, including attached pilasters and buttresses setting in CM 1:6, complete all as specified and as directed.
Material & Labour for precast cement concrete Type B1, 1:2:4 (20mm graded stone crushed aggregate) in landings, cover slabs (for manholes etc), chullah hoods, chhajja, water troughs, shelves and similar articles with plain faces, setting in CM 1:6, complete all as specified and as directed.
Material & Labour mild steel TMT bars 10mm dia and over, cut to length, bent to shape required , including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Material & Labour for 15mm thick rendering on fair faces of brick/concrete works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed
Supply only integral liquid water proofing compound complete all as specified and directed. Make : Pidilite/Sika or equivalent.
S/F 110mm PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.
Supply and fixing in 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
Supply and fixing in 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
Supply and fixing in PVC(HDPE) SWR 75 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, laid in treches or in floor complete all as specified and directed by Engr-in-Charge.
Supply and fixing 110mm PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls and vent pipe as specified and directed by Engr-in-charge
Material & Labour Concrete bed in 1:3:6 type C2 (40mm graded stone crushed aggregate) to drain pipe of bore 150 mm including packing under ,and haunching against the sides of pipe after they laid and tested; complete all as specified and directed.
Material & Labour Cutting into existing manholes 100MM dia for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required
Material & Labour for hardcore of gauge n.exc 63mm , deposited, spread and levelled in layers n.exe 15cm thick, watered and rammed to a true surface, complete all as specified and directed.
M& L for Cement concrete 1:3:6, type C2 (40mm graded stone crushed aggregate) in surface channel and drain, complete all as specified and directed.
Returning,filling in ,including spreading,levelling ,watering and well ramming in layers not exc 25cm in hard/dense soil.
Removing excavated soil material n.exc 50m and depositing where directed at a level n, exc 1.5 m above the starting point complete all as specified
Supply and fixing High Intensity retro reflective sign board including any type of Sign and letters with lamination, impeccable finish, attractive appreance, Elegant design, Smooth texture, Water Resistant, including Heatex for retro reflective signs to be fixed/pasted both side on stainless steel plate 5mm thick of size 1.35 x 1.35 mtr in any type of shape, the stainless steel frame will be stainless steel of dia 30mm to be welded to vertical pipe of stainless steel dia 50mm bore, frame height of sign board 2.1m from ground level and 0.5mm below ground level to be embedded in PCC 1:3:6 type C-2 including necessary earth work, any other accessories reqd for execution of wk is included in the quoted rate, complete all as specified and directed by Engr-in-Charge.
Excavation in trenches n.exc 1.50m wide and n.exc 1.50m in depth and getting out in hard/dense soil complete all as specified and directed.
Material & Labour for 15 mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and smooth without using extra cement complete all as specified and directed
Material & Labour for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer.
Supply and fixing wooden panelling on vertical surfaces of wall using the following specifications:- (a) Supply and fixing IInd class hard wood wooden gutties of size 25 mm x 25mm x 200 mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3 (1 for cement and 3 for sand) (b) Supply and fixing Horizontal runner II nd class hard wood @ 1.20 mtr C/C of cross sectional area exc 13 Sqcm and 25 Sqcm clean swan with nails or screws, treated with two coats of cerosite oil mixed with good quality pesticide for antitermite treatment. (c) Supply and fixing IInd class hard wood boarding 12 to 15 mm with tongue and groove method of fittings as in wall panelling planed one side, and other side wrought fixed with screws. (d) Supply and fixing IInd class hard wood decorative beading 40 mm wide on top and bottom along perimeter of the wall or as specified. (e) Material & Labour for French polishing on wooden surface any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats till the surface smooth/glossy complete all as specified and directed.
Material & Labour for 10mm thick teak wood finish laminated wooden flooring interlocked with each others and its size as directed,over 3 mm thick form as per manufacture instruction and over 150 micron polyethylene sheeting over the concrete to minimize moisture migration from the concrete and horiziontal and vertical edges shall be covered with beadings of same colour etc complete all as specified and directed by Engr-in-Charge. Make as per PS.
Material and labour for 100 mm thick plain cement concrete type D-2, 1:4:8 (Using 40mm graded stone crushed aggregates) as in sub base complete all as specified and as directed by Engr-in-charge.
Material and labour for 25 mm thick plain cement concrete type B-1, 1:2:4 (Using 20 mm graded stone crushed aggregates) as in sub base complete all as specified and as directed.
Supply and fixing Structural steel works as in tubular roof trusses, purlins, Rafter, vertical posts, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular pipe, channel or flat sections) including distance pieces, cleats , riveting incl bending and welding, conforming to Fe – 410W Gde E -- 250 quality A complete all spd and as directed.
Material & Labour for two coat of synthetic enamel paint on new/previous untreated steel surface including prepation over a coat of red oxide zinc chrome primer with modrant solution complete all as specified and directed .
Supply and fixing framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles as necessary, gusset plates, cleats, MS Flat, MS plate, rivetting etc n.exc 10 kg each brackets, conforming to FE 290 Gde E-165.
Material & Labour Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Material & Labour Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.
Material & Labour for plain sheet glass 4.80 mm thick ordinalry quality and glazing with oil putty or wooden beads in square or fixed with aluminium section including rubber beads exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-Charge.
Material & Labour for 5 mm thick reflective glass of approved colour ordinalry quality and glazing with oil putty or wooden beads in square or fixed with aluminium/wooden section including rubber beads exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-Charge.
Supply and fixing Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws, handle, tower bolt, locking arrangement etc complete all as specified and directed by Engr-in-Charge.
Material & Labour for Cement concrete type B-2,1:4:8 (40mm graded stone crushed aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc..
Material & Labour for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments layed over 15mm thick cement screed base (1:6) and all as directed by Engr-in - charge.
Material & Labour for point wiring with copper conductor cable, multistranded, single core 1.5 Sqmm size for one light point controlled by one switch with PVC insulated multistranded copper conductor cable FRLS of size 1.5 sq mm for earth continuity in and including concealed PVC conduit pipe of approved size and quality fixed in walls/ceiling/wooden panelling including fixing heavy grade concealed GI box on of any size complete all as directed and specified.
All as per Item No 53 but for one 3 pin socket outlet, 5 Amps Independent with cables 1.5 Sqmm size complete all as directed and specified.
Material & Labour for point wiring for 3pin 15 Amps socket outlet independent with copper conductor cable PVC insulated multistrand 2.5 Sqmm with 2.5 sqmm PVC copper conductor as earth wire connected to earth dolly and including concealed PVC conduit pipe of approved size and quality fixed in walls/ceiling/wooden panelling including fixing heavy grade concealed GI box on of any size complete all as directed and specified.
Material & Labour for Modular switch colour white/Golden Pecan one way single pole 6 Amp 1 module 240 volts. Make : Anchor/Havells/Cona
Material & Labour for Modular switch colour white/Golden Pecan one way single pole 16 Amp 1 module 240 volts. Make : Anchor/Havells/Cona
Supply and fixing for Modular colour white/Golden Pecan socket 6/16 A -2/3 Pin combined 2 module 240 Volt, Make:Anchor/Havells/Cona
Supply and fixing Modular socket colour white/Golden Pecan 6 A -2/3 Pin combined 2 module 240 Volt, Make:Anchor/Havells/Cona
Supply and fixing for modular white/Golden Pecan cover plate with frame 3 module. Make : Anchor Roma/Havells/L&T
Supply and fixing for modular white/Golden Pecan cover plate with frame 8 module. Make : Anchor Roma/Havells/L&T
Supply and fixing LED 36watts recessed 2x2 luminaire Cool white to enhance the delight of occupants with comfortable experence through its design & glare free soft illumination and connection of 3 core copper wire with all accessories complete. Make : Bajaj /Havells/CG
Supply and fixing decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly energy efficient ready to use pack 18Watts LED 6000K with connection 3 core copper wire from ceiling rose to fitting with complete accessories . Make : Havells/ Bajaj/CG
Supply and fixing MCB SP 6 to 32 Amps 'C' series, 240 volts, 10 KA complete all specified and directed by Engr-In-Charge. Make : Havells/ABB/Indoasian/ C&S
Supply and fixing MCB SP 32 Amps 'C' series, 240 volts, 10 KA complete all specified and directed by Engr-In-Charge. Make : Havells/ABB/ C&S
Supply and fixing MCB SPN 40-63 Amps 'C' series complete all specified and directed by Engr-In-Charge. Make : Havells/ABB/ C&S
Supply and fixing MCB DB SPN 8Way double door 240Volt 50Hz with complete accessories. Make : Havells / ABB/Schenider
Supply , laying and testing cable XLPE insulated, screened, PVC bedded, galvaniezed steel strip or wire armoured, electric power cable 1100 Volts grade with stranded aluminium conductore of size 16 Sqmm 2 core
Excavation in trenches n.exc 1.5 metres wide and n.exc 1.5 metres deep and getting out in any type of soil, all as specified.
Returning filling in including spreading leveling, watering and well ramming in layers n. exc 25cm, all as specified.
Removal of excavated material to be distance n.exc 50M and depositing where directed at a level n.exc 1.5m high from the starting point, all as specified.
Supply and laying unreinforced pre cast concrete cable cover class LV type I flat size 250x150x40mm all as specified and directed.
Sand cushioning to under ground cables, 8 cm thick layer before laying and testing the cable and 15 cm thick after laying and directed by Engr-in-Charge.
GI light grade pipe of 50mm dia with all fitting; laid in trenches, across road or pole complete all as specified.
Advait Enterprises (BID ID -3363727)
M/S SHAMSHER ALI SUFI (BID ID -3358949)
Ruhi Construction (BID ID -3363711)
MEHDI ALI (BID ID -3367223)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .