Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.6 LAdmitted-Finance | ₹5.6 L | L1 | Admitted-Finance |
| 2 | L2₹6.4 LAdmitted-Finance | ₹6.4 L | L2 | Admitted-Finance |
| 3 | L3₹6.7 LAdmitted-Finance | ₹6.7 L | L3 | Admitted-Finance |
| 4 | L4₹7.2 LAdmitted-Finance | ₹7.2 L | L4 | Admitted-Finance |
| 5 | L5₹7.2 LAdmitted-Finance | ₹7.2 L | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Raj Engineering Co. L2 | Shakti Trading Co. L4 | M/S CHAITANYA CONSTRUCTION CO. L5 | Gupta Brothers L3 | balram associates L1 |
|---|---|---|---|---|---|---|---|---|
| 1.01 | Supply of 7.5 HP Submersible Pump Set fitted with dynamically balanced impeller mounted on stainless steel shaft with protection sleeve having stage bowls of closed grained bronze impeller complete in C.I Body. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM suitable for operation on 3, 415V, 50Hz, AC supply, Discharge: 250 LPM, Head: 84 mtr, Stage 10. Make of Pump: BS/KSB/SU/As approved by DJB | 3 | Nos. | 1,16,700 ₹1.4 L | 1,05,000 ₹1.2 L | 1,18,500 ₹1.4 L | 1,03,332 ₹1.2 L | 1,20,000 ₹1.4 L |
| 1.02 | Supply of Hut Type Feeder Piller Automatic LT Panel board suitable for 415 Volts, 3 phase, 50 Hz, 4 wire system for operation of up to15 HP submersible set, made out of not less than 2mm thick CRCA for load bearing members, and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof floor mounted type. The panel size 760mmX1360X300mm and having 1)63 AMP Change over-1No.2)63 AMP TPN MCCB-1 No.3) AMP. Meter 0-50 A-1No.4) Volt Meter-1No.5)Amp.& Volt Meter Selector Switches- 1 Set. 6) Auto Manual+ Light+ Control MCB SP 6 Amp-1 No. each 7) CT-3Nos 8) push button +ON/OFF light-2nos each 9)5 KVR Shunt capictor-1No. 10) Aluminum Bus bar size 25 mmX6mm-1 set. 11)15HP Star Delta Starter a) 32 Amp power contactor -3No b) Over load Relay 14-23 Amps. 1 No. c) Star deltaTimer 1 No. d) QT Timer -24 Hours -1 No. e) Motor protection relay flush mounting with display with thermal O/L,short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection 1 No.Make of accessories:-L&T/C&S/AE/as per DJB approved | 3 | Nos. | 1,33,500 ₹1.6 L | 1,35,000 ₹1.6 L | 1,35,000 ₹1.6 L | 1,09,332 ₹1.3 L | 1,20,000 ₹1.4 L |
| 1.03 | 3 Supply-Of M.S. Clamp of 600 mm Length, duly fabricated out-of 12.5 mm thick, 80 mm wide M.S.Plate for holding the Pipe of 50 mm dia. | 3 | Nos. | 2,280 ₹2,690.40 | 3,150 ₹3,717 | 2,550 ₹3,009 | 3,000 ₹3,540 | 3,000 ₹3,540 |
| 1.04 | 4 Supply-Of G.I. Pipe 80mm dia, Medium-class, each of 3" Meters Long, duly threaded on both-ends, welded & fitted with G.I./M.S. Flange of minimum thickness 6 mm on both ends with a Slot for Submersible-Cable. Welding of M.S Strips at both ends on flange. Make of Pipe: Jindal / TATA. | 45 | Nos. | 1,30,500 ₹1.5 L | 1,57,500 ₹1.9 L | 2,02,500 ₹2.4 L | 1,19,250 ₹1.4 L | 83,250 ₹98,235 |
| 1.05 | Supply of three core flat cable with bare bunched copper conductor insulated & sheathed with PVC for submersible pump motor with voltage grade upto 1100V of 6.0 sq mm. size in 100mtr. Roll. Make: Finolex / Havells/CCI | 3 | Roll | 52,500 ₹61,950 | 81,300 ₹95,934 | 43,500 ₹51,330 | 75,000 ₹88,500 | 67,500 ₹79,650 |
| 1.06 | Supply-Of Tail-piece of Medium-Class G.I.-Pipe 500 mm Long with one-end threaded, as per out-let of Pump and another-end flanged, as per size of G.I. Pipe 80 mm dia. Make of Pipe: Jindal / TATA. | 3 | Nos. | 2,880 ₹3,398.40 | 3,000 ₹3,540 | 2,550 ₹3,009 | 3,000 ₹3,540 | 3,000 ₹3,540 |
| 1.07 | Supply-Of G.I. Bend 90° x 80 mm dia, having Flange at both-ends One side M.S. Flange and other side G.I flange. | 3 | Nos. | 3,450 ₹4,071 | 3,450 ₹4,071 | 2,550 ₹3,009 | 3,000 ₹3,540 | 3,000 ₹3,540 |
| 1.08 | Supply-Of Nut-Bolts, ½" dia of different size i.e. 1.5" & 2.5" Long, threaded of good quality. | 30 | Kg | 3,300 ₹3,894 | 3,300 ₹3,894 | 2,400 ₹2,832 | 3,000 ₹3,540 | 3,000 ₹3,540 |
| 1.09 | Supply-Of Rubber-packing for 80mm dia Flange. | 45 | Nos. | 1,215 ₹1,433.70 | 9,450 ₹11,151 | 4,050 ₹4,779 | 675 ₹796.50 | 1,350 ₹1,593 |
| 1.10 | Supply-Of Bore-Cover Plate of Size: 300 mm dia, made out from 6 mm thick M.S.-Sheet in 2-Halves and a Circular-Hole of 80 mm dia in center with Locking arrangement by Nuts & Bolts. | 3 | Nos. | 3,750 ₹4,425 | 4,500 ₹5,310 | 3,150 ₹3,717 | 3,600 ₹4,248 | 3,000 ₹3,540 |
Tender Value
Refer Docs
EMD Value
₹19,000
Closing Date
24 Feb 2026, 11:15 amClosed
EE ENM M VII
MU BLOCK PITAMPURA DELHI-34
SIC of newly bore tube wells at Haiderpur apartment Phase 2 Ashok Vihar Lekhram park Wazirpur village and A Block JJC Wazirpur Industrial area in AC 17
2026_DJB_287111_4
NIT No. 35(2025-26)M-VII
Open Tender
Miscellaneous Works
60 days
EE ENM M VII
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Account No 50448339804
₹19,000
Yes
26 Feb 2026
17 Feb 2026
24 Feb 2026
17 Feb 2026
24 Feb 2026
17 Feb 2026
Supply of 7.5 HP Submersible Pump Set fitted with dynamically balanced impeller mounted on stainless steel shaft with protection sleeve having stage bowls of closed grained bronze impeller complete in C.I Body. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM suitable for operation on 3, 415V, 50Hz, AC supply, Discharge: 250 LPM, Head: 84 mtr, Stage 10. Make of Pump: BS/KSB/SU/As approved by DJB
3 Supply-Of M.S. Clamp of 600 mm Length, duly fabricated out-of 12.5 mm thick, 80 mm wide M.S.Plate for holding the Pipe of 50 mm dia.
4 Supply-Of G.I. Pipe 80mm dia, Medium-class, each of 3" Meters Long, duly threaded on both-ends, welded & fitted with G.I./M.S. Flange of minimum thickness 6 mm on both ends with a Slot for Submersible-Cable. Welding of M.S Strips at both ends on flange. Make of Pipe: Jindal / TATA.
Supply of three core flat cable with bare bunched copper conductor insulated & sheathed with PVC for submersible pump motor with voltage grade upto 1100V of 6.0 sq mm. size in 100mtr. Roll. Make: Finolex / Havells/CCI
Supply-Of Tail-piece of Medium-Class G.I.-Pipe 500 mm Long with one-end threaded, as per out-let of Pump and another-end flanged, as per size of G.I. Pipe 80 mm dia. Make of Pipe: Jindal / TATA.
Supply-Of G.I. Bend 90° x 80 mm dia, having Flange at both-ends One side M.S. Flange and other side G.I flange.
Supply-Of Nut-Bolts, ½" dia of different size i.e. 1.5" & 2.5" Long, threaded of good quality.
Supply-Of Rubber-packing for 80mm dia Flange.
Supply-Of Bore-Cover Plate of Size: 300 mm dia, made out from 6 mm thick M.S.-Sheet in 2-Halves and a Circular-Hole of 80 mm dia in center with Locking arrangement by Nuts & Bolts.
Supply-Of Orifice-Assembly 80mm dia, 0.6 Meter Long, Double-Flange. One side M .S. Flange and other side G.I flange.
2 Supply of CI DF Non Rising spindle sluice valve PN 1.0/rins/SS/1410 body/wedge/bronze IS:14846 CI construction of size: 80 mm.Make: Kirloslar/IVC Shaft
3 Supply-Of C.I. D/F swing-type Non-Return Valve, as per 15:5312 (Part 1 & 2) PN 1.0, 15:14846, C.I. Body door of size: 80 mm dia. Make: Kirloskar/IVC
4 Installation of submersible pump and all allied electrical & mechanical accessories by lowering of submersible pump-sot adjoining with pipes by tightening of nut-bolts on fabe welded on Gl pipes. Laying of delivery system with sluiteariable A and NRV. Lowering of pump-set and pipes will be caried. Auton with help of heavy labour, chain pulley, hanged on either with L tripod or Hydra.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.80 MB
BOQ_380352.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid