Loading
Loading…
Loading…
Tender Value
₹1.1 L
EMD Value
₹2,240
Closing Date
2 Sept 2026, 4:00 pm
Ex Engineer RNB Division Pulwama
Ex Engineer RNB Division Pulwama
Renovation of CMOs Quarter Pulwama..
2026_PWDJK_321370_1
109/EEP/RNB/of 2026-2027/5510-15 dt.18.08.2026
Open Tender
Civil Works
Percentage
30 days
pulwama
All as per NIT
4 documents required · 4 mandatory
₹200
0470010200000099
₹2,240
Yes
18 Aug 2026
18 Aug 2026
3 Sept 2026
18 Aug 2026
2 Sept 2026
18 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area of 3 sqm. and below | - | no | - | - |
| 2 | Dismantling wooden boardings in lining of walls and partitions,ceilings,almirah : Thickness above 10 mm upto 25 mm | 1 | sqm | 1 | ₹1 |
| 3 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length imported wood | 1 | cum | - | - |
| 4 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws | 1 | sqm | - | - |
| 5 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm With 2nd class teak wood beading 62x19 mm | - | sqm | 1 | - |
| 6 | Providing and fixing of glass panes of thickness 3.5 mm all as per directions of EIC | - | sqm | - | - |
| 7 | Providing and fixing of 12mm thick plyboard in ceiling all as per directions of EIC | 1 | sqm | - | - |
| 8 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter | 1 | sqm | 1 | ₹1 |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work | 1 | sqm | 1 | ₹1 |
| 10 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) | - | cum | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.56 MB
BOQ_1072929.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].