Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.9 LAccepted-AOC PLOT NO 26 1ST FLOOR PRATAP NAGAR NEAR JAIL ROAD NEW DELHI 110064 | NEW DELHI | NEW DELHI | DELHI | 110064 | L1 | Accepted-AOC Accepted due to L1 | |
| 2 | L2₹23.4 L+₹1.5 L (6.72%)Rejected-AOC B 101 3RD FLOOR JHILMI COLONY DELHI 110095 | DELHI | EAST DELHI | DELHI | 110095 | L2 | Rejected-AOC higher rate | |
| 3 | L3₹24.3 L+₹2.3 L (10.7%)Rejected-AOC RZF 498 MG MARG RAJ NAGAR II PALAM DELHI CANTT 110077 | NEW DELHI | DELHI | 110077 | L3 | Rejected-AOC higher rate | |
| 4 | L4₹24.4 L+₹2.5 L (11.2%)Rejected-AOC | L4 | Rejected-AOC higher rate | |
| 5 | L5₹24.7 L+₹2.8 L (12.6%)Rejected-AOC | L5 | Rejected-AOC higher rate |
Tender Value
Refer Docs
EMD Value
₹96,000
Closing Date
29 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NEW DELHI
GE NEW DELHI
CA NO GE/ND-77/2022-23 PROVISION OF AN EXIT GATE AT NSB -I CHANAKYA BAGH AT CHANAKYAPURI AND PROVISION OF SENTRY BOX AND COVERED SHELTER AT NARAINA BAGH UNDER GE NEW DELHI
2023_MES_583582_1
GE/ND-77/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE NEW DELHI
refer tender documents
7 documents required · 7 mandatory
₹500
GE NEW DELHI
₹96,000
Yes
31 Mar 2023
1 Mar 2023
31 Mar 2023
1 Mar 2023
29 Mar 2023
15 Mar 2023
Amount
Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc all complete as specified and as directed.
M&L brick work with sub class ‘B’ brick, straight or curved on plan exceeding 6m means radius in CM 1:6 with old size bricks etc all complete as specified and as directed.
Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished using WPC ( WPC to be paid measured and separately) even and smooth without using extra cement etc all complete as specified and as directed ( Externally).
Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement all complete as specified and as directed.
M&L for 10mm thick cement plaster in CM 1:3 on bricks on concrete surfaces of ceiling finishing the surfaces even and smooth without using extra cement all complete as specified and as directed.
Supply only integral water proofing compound all complete as specified and as directed.
Preparing newly plastered surfaces of ceiling and applying three coats of white wash all complete as specified and as directed.
Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper coat of coat of wall putty 2 to 3mm thick on plastered surfaces preparatory to distempering on wall surface all complete as specified and as directed .
Preparing newly plastered surfaces of walls and applying two coats of exterior emulsion paint (Apex) over a coat of primer and 2 to 3 mm thick wall care putty etc all complete as specified and as directed.
Excavation in post holes (for similar holes) each n.exc 0.5 cum, getting out, returning, filling in and remaining each of broken rubble mixed with earth aroundin layers not exc 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface etc all complete as specified and as directed.
M&L Cement concrete Type C-2 1:3:6 (using 40 mm graded aggregate) in foundations, filling and mass concrete etc all complete as specified and as directed.
Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n. exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in any type of soil etc all complete as specified and as directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n. exc 25 CM in any type of soil etc all complete as specified and as directed.
Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above starting point in soils etc all complete as specified and as directed.
M&L Cement concrete Type D-2 1:4:8 (using 40 mm graded aggregate) in foundations, filling and mass concrete etc all complete as specified and as directed.
M&L PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in copings, plinth course, damp proof course, bed blocks, benching, PCC cills and similar items etc all complete as specified and as directed.
S&F for 10mm thick polycarbonate sheet of and colour having tensile as per manufacture instructions as in roof covering/cladding to wall fixed with self tapping screws as specified or as per manufacture instruction etc all complete as specified and as directed.
M&L for Steel work in tubular trusses round or rectangular pipes including special shaped washer etc complete using ERW or induction butt welded tubes confirming IS etc all complete as specified and as directed.
M&L for mild steel framed work as in trusses, purlins, rafters etc including cleats, and steel plates, wind ties etc all complete as specified and as directed.
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc all complete as specified and as directed.
M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wind ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 etc all complete as specified and as directed.
M&L for Applying two coats of synthetic enamel paint on new steel surfaces any description, not otherwise described over 10 cm width or girth etc all complete as specified and as directed.
Reinforced cement concrete 1:1.5:3 nominal mix, using 20mm crushed stone aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc all complete as specified and as directed.
Reinforced cement concrete 1:1.5:3 nominal mix, using 20mm crushed stone aggregate as in columns etc all complete as specified and as directed.
Reinforced cement concrete 1:1.5:3 nominal mix, using 20mm crushed stone aggregate as in slab supported on walls, beams & columns in floors, roofs etc all complete as specified and as directed.
Use and waste of form work to soffits of suspended slabs such as roof slabs, not exe 200mm thick, fair finished surfaces of concrete etc all complete as specified and as directed.
Use and waste of form work to sides of concrete foundations footings base of columns, plinth beams ,raft and raft beams, sides and soffits of foundationetc all complete as specified and as directed.
Use and waste of form work to sides of pillars, columns etc all complete as specified and as directed.
Use and waste of form work to edges of concrete flats, treads breaks in floors, window cills,roof etc n exe 20 cm wide and sides RCC/PCC bands in wall, horizantal or sloping and similar work exe 5 cm but n exe 15 cm wide, fair finished surfaces of concrete etc all complete as specified and as directed.
S & F for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not les than 0.9 mm dia or securing with clips. (annealed) not less than 0.9mm dia, etc all complete as specified and as directed.
Mild steel TMT bars (conforming to Fe 500/Fe 550) 6 to 8mm dia in stirrups cut to lengths bent to shape required including cranking bending and spirally hooping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia etc all complete as specified and as directed.
S&F standard anodised aluminium section for frame work for fixing ACP sheet cladding etc all complete as specified and as directed.
S&F 3mm thick pre coated aluminium Composite Panel cladding sheet of approved colour and shape, joint filled with silicon sealant, fixed as per manufacturers instruction etc all complete as specified and as directed.
S&F stainless steel letters of font "Arial" or any other font as approved user in size 50cm x 30cm x 25mm thick made with 2mm thick stainless steel sheet matt finish fixed on composite panel faced wall with approved stainless steel screws and bolts for the letters "CHANAKYA BAGH NSB - I" in English etc all complete as specified and as directed.
M&L 20mm thick Granite (of any type and colour) work (table rubbed and polished) in jambs, pillars and like in vertical surface in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screed in CM 1:4 etc all complete as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm thickness etc all complete as specified and as directed.
M & L for cement concrete type D2 1:4:8 (40mm graded aggregate) 75mm thick etc all complete as specified and as directed.
M & L Sand for 50 mm thick filling under interlocking paver block including watering and consolidation etc all complete as specified and as directed.
M&L for Machine pressed precast concrete interlocking paver block with ceramic/glossy finish any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade etc all complete as specified and as directed.
S&F Anodised aluminium frame powder coated (minimum thickness of powder coating 50 micron)for doors, windows ventilators with one or more rebates including joining cleat for fixing etc all complete as specified and as directed.
S&F 5.5mm thick sheet glass ordinary quality and glazing with aluminium snap beading in square and fixed to aluminium sections all as spd and directed
M&L for Non skid ceramic coloured tiles 400mmx400mm x7mm thick as in floors, set and jointed with cement slurry and pointed with white or coloured cement to match with tiles over and including 15mm thick screed bed in cement mortar 1:6 etc all complete as specified and as directed.
M&L for glazed ceramic colored tiles 450x300mm x 6 to 7mm thick, as in patches in vertical surfaces such as dado, skirting, wall etc set & jointed in neat cement slurry and pointed with coloured cement to match with tiles in over and including 10mm thick cement plaster in cement mortar 1:4 etc all complete as specified and as directed.
S&F aluminium anodised powder coated window and ventilator shutters side hung type without sash bars, aluminium sections weighting 0.55 kg/m including necessary joining cleats, glazing clips rubber packing , aluminium snap beading screws anodised aluminium fittings such as peg stay 150mm long (1 No) hinges type B-21 100 mm long 2 Nos suitable handle 1 Nos etc all complete as specified and as directed.
Dismantling structural steel work in?cluding doors, gates but excluding framed truss etc all complete as specified and as directed.
Reinforced cement concrete 1:1.5:3 nominal mix, using 20mm crushed stone aggregate as in beams,roof beams, cantilevers,lintel over 1.5m span, bands, chajjas etc. all complete as specified and as directed.
BEHAL TRADERS
MRITUNJYA ASSOCIATES
sony engineering works
M/S SONU ENTERPRISES
J S CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .