Upgradation of Conference rooms at PRAFPUL1, 2 and SPF, BARC, Trombay, Mumbai 85

Amount

Providing and fixing anodized aluminium work Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Extra for colour anodizing for Aluminium work

Aluminium Composite Metal Panel Designing, providing and fixing of 4 mm thick approved make and shade wooden texture/plain Aluminium Composite Metal Panel of approved make used for cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under reelevant item) Note : ACMP shall be measured to the actual visible area of the ACP sheet including silicon joints as fixed on site.

Acoustic false ceiling system Providing and fixing in position suspended false ceiling system using 600 x 600 mm mineral fibre reinforced factory applied vinyl painted ceiling tiles, Tiles having 16/15mm thick, and approvred surface design and edge profile etc complete as per specification and as directed by Engineer- In-charge. Detailed specifications are as given in technical specifications sheet seperately.

Calcium silicate board false ceiling Providing and fixing in position suspended false ceiling system using 12 mm thick calcium silicate boards (HILUX ceiling systems) 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC placed in a suspended grid of size of 600x 600mm made of hot-dipped G.I steel sections wherein the ceiling sections of 0.55 mm thick shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wires/ 1 mm thick strip hangers made of G.I sheet sections with necessary level adjusters and inter channels of 0.90mm thick with connecting clips and resting on the perifery walls on wall angles of 0.55 mm thickness including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per directions of Engineer-in-charge.The main tees to be suspended from the ceiling/ soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35mmx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips/ G.I strip Hangers at 600mm centers . the entire grid system shall be designed to bear a distributed load of minimum 25 kg/Sq.m (Only calcium silicate false ceiling area will be measured for the purpose of payment)

Customised acoustic wall panels Providing and fixing custom designed acoustic Wall paneling of M/s Anutone or equivalent approved make with 60 mm thick minimum acoustic panel in differrent sizes adn shapes as per drawings, The panels to be fixed with waterproof glue or manufacturer's specifications and sealed with silicon sealant etc. complete as directed by Engineer-In-charge. Detailed specifications are as given in technical specifications sheet seperately.

Acoustic Wall panelling Providing and fixing of M/s Anutone or equivalent approved make of Slats made of pinewood E1 grade fiberboard, Melamine/ veneer laminated finishetc. complete as directed by Engineer-In-charge. Detailed specifications are as given in technical specifications sheet seperately.

3 mm thick PVC vinyl flooring tiles Providing and laying heavy duty 450x450mm or 600mmx 600mm x 3 mm thick PVC vinyl flooring carpet tiles in approved finish and premium grade consisting with 06 different layers. Detailed specifications are as given in technical specifications sheet seperately.

12 mm thick cement boards Providing and fixing heavy duty weather resistant cement boards of 12 mm thickness in specified size including necessary fixing in position at levels as per drawing etc. complete as per ASTM C-1185 and ISO-8336 (Part E), rate inclusive of fixing all necessary SS fasteners / s s screws / ss bolts etc. and as directed by Engineer-in-Charge. Note : Tentative / suggested make for the guidance of the bidder(s) : M/s. E-board/ C-board / ECO PRO or approved equivalent make

6mm thick Marine plywood Providing & fixing 6 mm thick fire resistant marine ply in position on frame work including all materials, labour etc. complete as directed by Engineer-In-charge. Detailed specifications are as given in technical specifications sheet seperately.

Decorative veneer Extra for providing and fixing flush doors with premium quality decorative veneering on both sides

Laminated sheet Providing and fixing FR+ Fire Retardant high pressure 1.5 mm thick premium laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labouretc. complete as directed by Engineer-In-charge. Detailed specifications are as given in technical specifications sheet seperately.

Aluminium Grill Providng and fixing Aluminium Grill 10 mm thick "DECO GRILLE" make Model No. DG- 202 in natural Silver anodising of min 15 Micronswith a opening size of 60mm x 45mm and Minimum weight of 4.12 Kg/ Sq.M including providing anfd fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge .Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg/ sq.mm.

Colour anodizing of aluminum grill Extra for providing Aluminium Grill 10 mm thick with colour anodised by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge

Friction windows stays Providing and fixing stainless steel (SS 304 Grade) adjustable friction windows stays size 710 X 19 mm of approved quality with necessary stainless steel screws to the side hung windows as per specifications and as directed by the Engineer-in-charge

Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters

Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters

Construction of storage units Designing , supplying , fabricating and installation of free standing storage units/ wall mounted storage units of different sizes as per approved drawing made out of best quality 19 mm thick FR marine plywood panels (Century/ Anchor with Fire wall technology plywood or equivalent to be approved by EIC). laminating on both sides with 1.5 mm thick Premium decorative laminate sheet of approved make, colour and pattern; Providing and fixing in position 6mm thick toughend glass whererever required for display stoarage area; providing steam beach beading wherever required; polishing all edges with melamine polish;Item also inlcludes providing adn fixing in position accessories such as stationary drawers, fixed /mobile drawer unit,with all necessary fittings/hardwares and accessories like heavy duty hinges, drawer locks, decorative handles for door and drawers, heavy duty sliding frames of drawers common key locking arrangement of approved make etc. to be complete the jobs as per approved drawings and specifications and to suit site and as directed by the Engineer-in-charge. (Note: Front elevation will be measured in SqM for the purpose of payment.)

Construction of conference table supplying and fabricating wooden conference tableconsisting with 19 mm thick best approved quality Fire resistant (fire wall technology) marine plywood (Century/Anchor or equivalent to be approved by EIC) duly laminated on both sides by 1.5 mm thick best decorative laminate sheet of approved quality and pattern, Table top of different sizes varing form 4200mm to 3600mm with varying width of 1200mm to 1000mm with a height of 750 mm with under carriage of approved shape; top to be made of 30 mm thick FR marine ply duly laminated on both sides; providing steam beach beading polishing all edges with melamine polish including all labours, material, cutting as required etc to be completed as shown in sketchs and generally as per specifications and to suit site and directed by Engineer-In-Charge.(Note: Top plan of table will be measured in SqM for the purpose of payment.)

Reconstruction of 30 mm thick new table top with formica finish Replacing existing table top a size of 3.5m x 1.20 m with 30 mm thick new top with best quality of approved make FR marine plywood laminated on both sides with 1.5 mm thick best quality plastic laminate of approved make, colour and pattern including providing and fixing of steam beach beading on all edges of tables top adn frame with melamine polish; Item also inlcludes providing electrical switches, power points and LAN sockets for internet and telephone with required fittings and wiring at both ends(02Nos). etc. complete as required as per detailed technical specification and as directed by the Engineer-in-charge.

Construction of Type-1 seating arrangement Providing and fixing medium back revolving seating arrangement with nylon undercarriage, fixed armrest handle and back of medium back mode etc complete as per specification and as directed by EIC. Detailed specifications are as given in technical specifications sheet seperately.

Construction of Type-2 seating arrangement Providing and fixing medium back visitor tubular frame chairs-cantilever type & made of 2.54 cm ɸ x 0.20 cm thick SS 202 tube, the back connected to frame through chrome plated high pressure die cast connector piece etc complete as per specification and as directed by EIC. Detailed specifications are as given in technical specifications sheet separately.

Construction of Type-3 seating arrangement Providing and fixing in position 3 seater sofa set 2240mm X 970mm X 940mm complete as per specification and as directed by EIC. Detailed specifications are as given in technical specifications sheet separately.

Construction of Coffee table Providing and fixing in position coffee table etc complete as per specification and as directed by EIC. Detailed specifications are as given in technical specifications sheet seperately.

WALL HUNG STORAGE UNIT with glass door Designing, supplying, and installation wall hung storage unit (store) a size upto 900 mm (Width) x 340 mm (Depth) x 635 mm of approved make.Detailed specifications are as given in technical specifications sheet seperately.

Construction of console table Providing and fixing designer console table of metal framework with gold/rose gold finish and porceline table top etc complete as directed by EIC. Detailed specifications are as given in technical specifications sheet seperately.

Wood Work in second class teak wood Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge Second class teak wood

LOUVERED OPENING Providing & fixing LOUVERED OPENING of required size in door shutters including making the opening, providing & fixing teak wood louver blades with necessary teak wood frame work, beading & applying one coat of approved wood primer etc. complete.

35 mm thick flush door shutters Providing and fixing 35 mm thick flush door shutters conforming to IS : 2202 non-decorative type, Boiling Waterproof , core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete.

Magnetic catcher Providing and fixing heavy duty magnetic catcher triple strip vertical type 40 mm of approved quality in cupboard / ward robe/FRP shutters, including fixing with necessary screws etc. complete .

Teak wood battens Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Commercial flush door shutters

Extra for providing vision panel to flush door Extra for providing vision panel not exceeding 0.1 sqm in all type of flush door including fixing 4 mm clear glass with necessary teak wood beadings complete all as per specifications and as per drawings.

6 mm thick Clear float glass Providing and fixing glazingwith clear float glass panes of 6.00 mm thickness in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

Toughened glass 6mm thick Providing and fixing glazing With toughened float glass panes of 12mm thickness in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

Toughened glass 12mm thick Providing and fixing glazing With toughened float glass panes of 12mm thickness for flooring purpose and /or doors, window, and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge

One point panic device Providing and fixing mild steel silver heavy duty One point panic devic of M/s Dorma PHCR 1000 or One point panic device PHA 2001 - PHA2102, PHA 2105 L-1300mm with necessary screws etc. all as per specifications and as per drawings., Usage Type: Heavy Duty, Powder Coated

Tower boltsof size 300 X 12 mm Providing and fixing stainless steel tower bolts of size 300 X 12 mm of approved make with necessary screws etc. all as per specifications and as per drawings.

Tower bolts of size 150 X 12 mm Providing and fixing stainless steel tower bolts of size 150 X 12 mm of approved make with necessary screws etc.all as per specifications and as per drawings.

Brass barrel Tower bolts 100x10mm Providing and fixing Brass barrel Tower bolts 100x10mm of approved make with necessary screws etc.all as per specifications and as per drawings.

Providing And fixing dead Lock of approved make with both side Key Cylinder for metal doors/wooden flush doors Detailed specifications are as given in technical specifications sheet separately and as directed complete

Providing And fixing Concealed/OPEN Flush Bolt- of approved make 300 mm for double door shutter for metal doors/wooden flush doors Detailed specifications are as given in technical specifications sheet separately and as directed complete

Stainless steel butt hinges Providing and fixing stainless steel ball bearing fire tested stainless steel butt hinges of size 125 x 75 x 3.00 mm (heavy weight) of approved make with suitable stainless steel screws etc. complete as directed by the Engineer-in-charge

Heavy duty hydraulic door closers Providing and fixing Heavy duty hydraulic door closers of Stainless Steel Door Closer TS 83 etc complete. Detailed specifications are as given in technical specifications sheet separately and as directed complete

Vision panel and aluminium louvers Extra for providing vision panel and aluminium louvers in all type of flush door including fixing 4 mm clear glass with necessary teak wood beadings complete all as per specifications and as per drawings.

Provision KICH PHH Mode handles Providing and fixing a pair of SS Door handles- 32mm dia 600 mm long- KICH- 316 grade of specified Dia and length handles in aluminium / glass / wooden doors complete all as per specifications and drawings.

Melamine polishing Providing PU Melamine polishing on wood work/veneer including a sanding, filling, sanding sealer, melamine coating with two or more coats on new works to form a uniform neat finish as directed by the Engineer -in-charge and / or as per the specifications complete as directed by the Engineer-incharge

Providing and Fixing wallpaper Providing and fixing in position premium quality designer (Designs/wooden texture and /or 3D) colored wallpaper of M/s marshall make or equivalent to be approved by EICWall paper made up of PVF material, 100% Washable, Colorfast, Fire Retardant Scratch-Resistant, Energy Saving, Thermal Insulating, One Year Warranty,

Powder coating in wood grain finished to aluminum sections etc complete. Detailed specifications are as given in technical specifications sheet separately and as directed complete

Stainless steel Grill Designing , supplying , fabricating and installation of customized wall mounted stainless steel SS304 PVD Coated, polished CNC cut Grill For Multiple use in gold and/or rose gold in colour of different sizes etc as directed by EIC complete as per specifications.

FR Velvet Curtains & Accessaries Providing , supplying and fixing FR Velvet curtains of M/s Om Pile Pvt Ltd make or equivalent approved including velvet fabric and accessories necessary for fixing of curtain as per approved fixing arrangement. Fabricating curtains to required design, pattern, sizes etc as per approved design and approved Fabric shall be 100% cotton of width around 142cm (56") and weight 525 GSM etc.complete and as directed by the Engineer in charge.

Venition blinds Providing, supplying and fixing premium quality designer venition blinds of Ms Vista or approved make all accessories and fabricating to required sizes etc as per approved design and approved Fabric complete all as directed by Engineer in Charge.

Round Dustbin Holder Providing and fixing in position Light weight but sturdy structure Round Dustbin Holder made of chrome Plated thick wire for easy installation, with fixing at only two points, disposable bags can be hung inside the frame directly, size of frame shall have Dia.of 265 mm, Height : 205 mm Prefereble make shall be Hettich Cargo Round Dustbin Holder model no. 9210444 etc complete as per specification of clause-17 and as directed by EIC

stainless steel kitchen sink Providing and fixing satin finish stainless steel AISI 304 (18/8) kitchen sink of size 610 x 510 mm without drain board and bowl size 685 x 535 x 250 mm depth as per IS13983 of approved make, with C.I. brackets, fittings and stainless steel plug 40 mm including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing Jaquar CP brass Table Mounted Sink Cock heavy duty of approved model, including fixing with necessary screws etc. complete .

Providing and fixing of Multicolour Engineered Wood Framed Canvas Wall Painting of various modern art acrylic painting of size 1000mm X700mm as per specifications etc complete and as directed by EIC

Polished River Rock Stones Providing and laying in position big white/black/colour Polished River Rock Stones (Jumbo of sizes between 4cm - 6cm) for Decoration/Garden work as per direction of Engineer-in-charge

20 mm thk sandstone mosaic tiles Providing, supplying and fixing in position dry wall cladding with matte teak sandstone mosaic tiles, 20 mm thickness of approved make and in differncet sizes and shapes for exterior wall decorating work, etc as per approved design etc complete all as directed by Engineer in Charge.

Removing the damaged PVC Flooring carefully including removing the resins sticking on the floor, cleaning the floor carefully stacking the serviceable materials at places shown and disposing the unserviceable materials within 50 m lead at places shown complete as directed by the Engineer-in-charge

Providing and fixing 10mm x 110mm expansion hold fasteners in CC/RCC surface backing including drilling necessary holes and the cost of bolt etc.complete. Note : Tentative / suggested make for the guidance of the bidder(s) : M/s. Hilti make (Model - HSL) or approved equivalent make. Size 10 mm x 110 mm

Providing and fixing 12mm x 130mm expansion hold fasteners in CC/RCC surface backing including drilling necessary holes and the cost of bolt etc.complete. Note : Tentative / suggested make for the guidance of the bidder(s) : M/s. Hilti make (Model - HSL) or approved equivalent make. size 12 mm x 130mm

Providing interior architectural designer for interior design of 3 (three) conference rooms of sizes mentioned below, etc complete as per specification and as directed by EIC. Detailed specifications are given separately. Design of conference rooms and front elevation of the building of sizes mentioned below, etc complete as per specification and as directed by EIC 1 Conference room area of size 14mX4m 2.Conference room area ofsize 9mX6m 3. Conference room area of size 10mX12m 4. Front elevation of the facility size 10mX3M

Providing interior architectural designer for interior design of office space area of size 36 Metre X 27 Metre having different office spaces like conference room, offices, wash rooms, pantry, lecture hall , etc complete as per specification and as directed by EIC

CERAMIC STEEL DUO board CERAMIC STEEL DUO writing and projection board size about 2250mm (L) x 1500mm(H)etc. complete as directed by Engineer-In-charge as per detailed specification.

Supplying of suitable highly skilled Carpenter / plumber / mason/air conditioning machanic as a manpower with set of hand tools / drilling / cutting machines for miscellaneous jobs like carpentry maintenance, plumbing and masonry jobs. NOTE: Suitable manpower shall be deployed for the job assigned with safety gears as & whenever required. Man power shall be deployed as per requirement, including holidays & late working if required.

Supply and installation of essential office accessories Supply and installation of essential office accessories like metal CPU trolley, keyboard trey, office trays (pack of 2 pcs), starterkits for white board (dry markers,white board eraser, round magnets, Scientific Calculator, wall clock). All accessories shall be of approved make and as per specifications and as directed by the Engineer-in-charge. Detailed specifications are given separately.

Installation, testing and commissioning of FCUs (fan coil units) Installation, testing and commissioning of FCU (fan coil unit) with flow control valve as per Deatiled technical specification given separetely. Item includes removing of exisitng old/damaged fan coil unit along with all piping and insulations, including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Granite work Providing and fixing Minimum 17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Jet Black colour for kitchen platforms, vanitiy counters, wash basin counters, door frames, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish and /or rough flamed finished granite for stpes wherever requirement as per EIC etc. complete at all levels. Note: Item also includes providing edge moulding to 17 mm thick Granite Slab counters, Vanitis etc. including machine polishing to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge.

Brick work Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash/ Flyash Lime bricks with minimum 70 kg/ sq.cm strength of approved make and size in super structure up to and including Floor II Level including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.

Half brick masonry using Flyash bricks Providing and constructing Half brick masonry using Flyash/ Flyash Lime bricks with minimum 70 kg / Sq.cm strength of approved make and size in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement in Super Structure up to Floor - II level. (Reinforcement will be paid under relevant item)

15 mm thick internal plastering Providing 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge

PCC 1:1.5:3 Providing and laying in position cement concrete of 1:1.5:3 at all levels (1 cement, 1.5 crushed sand, 3 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc.. complete as per specifications and drawings but excluding the cost of shuttering, centering and steel reinforcement.

Shuttering Form work Providing , centering ,shuttering Form work using PVC Film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings and specifications at all levels. For Super structure.

G.I. chicken mesh Providing and fixing G.I. chicken mesh in the junctions of concrete & brick work / masonry or as directed by the Engineer in charge including cutting, fixing with nails in position before plastering complete all as directed by the Engineer-in-charge. (only area of the chicken mesh used alone will be measured)

Structural repairs Providing structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer)5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used)

Ceramic glazed wall tiles Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Cutting of existing floor and embedding aluminium tube/channel as perdetailed specification given in Specification sheet.

Silicon sealant Filling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width

Double tubular scaffolding system Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding

Dismantling old plaster / skirting/Tiling Dismantling old plaster /floor tiles/ skirting/dado tiles carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead

Dismantling doors, windows Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Area beyond 3.00 Sq.M

Dismantling ceiling or partiton walls Dismantling Aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge

Dismantling brick work Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Lead charges Lead charges for lead Exceeding 2 KM but not exceeding 3 KM, by mechanical transport including loading, unloading, stacking / levelling etc.Soil/tiles/debris/civil scrap excluding metal Note: The rates in respect of Item is applicable for NET Quantities arrived at after making deduction for voids @ 20% in respect of soil/debis and @ 50% in respect of Rock from corresponding STACK / TRUCK Measurement

2000 lm downlighter with DALI CCT 6500K

2000 lm downlighter with DALI warm light

Cove lighting for interior work with LED strip

LED suspended Track light set

Driver accessories

DALI network based Occupancy sensors as per specification

DALI controller 3 channel with individual network addressable with timer clock

DALI Relay controller

DALI gateway

DALI power supply module

Controller Box

Devices for programming each controller

5 core Flexible FRLSH cables 1.5 sqr mm each color coded

3 core flexible FRLSH cables 1.5 sqr mm each color coded

2 core flexible FRLSH cables 1.5 sqr mm each color coded

3 core Flexible FRLSH cables 2.5 sqr mm each color coded

Shielded twisted pair (STP ) Cat-5E/ 6 cabling between sensors and keypads

Telephone cabling

100 mm wiremesh cable tray with cover

50 mm wiremesh cable tray with cover

Control connectors

M.S Supports

MS Box powder coated

Asthetic Power point boxes

Asthetic Lighting Switch boxes

SPN Distribution board 12 way

SPN Distribution board 8 way

Miscellaneous electrical works

IO point boxes with box and front socket

Hub boxes with 8 port switches

Smart screen with digital boards size 1

Smart screen with digital boards size 2

Digital boards

video conferencing set up

Sound system

FAS system modification for addressable FAS

FAS system modification for addressable FAS

PA system modification