Raising of NE-4 Siding inside Harbour area

Amount

Earth work in all kind of soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles as directed by the Engineer-in-charge. (Excluding GST)

Filling the low laying area with dreged spoil as per required level in layers ,each layer not exceeding 0.6mtr.,watering,compacting with VRR to achive OMC etc. complete excluding GST and as per direction of Engineer in charge. (10% voids shall be deducted from measured quantity to achieve payable quantity).

Providing & laying quarry dust of aprroved as sub-base in layers of required thickness each watering and compacting to the required density in O.M.C with Vibratory Roller with supply of all material labour transporation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC.

Providing, laying, spreading and compacting stone aggregates of IRC Gr-II(63 mm to 45 mm ) size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite and to fill up the interstices of coarse aggregate with Quarry dust , watering and compacting to the required density as per clause 404 of MORTH specification for Road & Bridge works with supply of all material labour transporation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC.

Engagement of 5HP Diesel Pump sets and placing those pumps at required locations inside prohibited area for dewatering of stagnated water by pumping including fuel and consumable, providing required length of suction and delivery pipes with supply of all labour, T&P, engagement, hire & running charges of Pump, transportation charges, tollage, Operator cost, Port entry fee with barricading the same area if required etc. including all taxes excluding G.S.T all complete as directed by Engineer-in-charge. (No idle charges will be paid. Pumps will be engaged as and when required).

P.C.C(1:3:6) of using 40mm. & down C.B.G chips of approved quality in foundation & plinth including mixing hosting, laying to proper level & slope compacting, curing, watering charges etc. complete including cost & supply of all materials, labour, T&P, taxes, etc. complete but excluding cost of GST as directed by Engineer-in-charge.

Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank of approved quality for R.C.C. structures and deshuttering and removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete but excluding GST as directed by Engineer-in-charge.

Foundation and Plinth

Roof Slab

C.C. M20 for R.C.C. works using 20mm and 10 mm size C.B.G. chips for all floors, foundation & plinth etc. of approved quality, mixing as per approved design mix, hoisting, laying, compacting with40 to 60 neddle vibrator, curing with cost and supply of all materials, labour, T&P, taxes, tollage, royalties,etc. all complete but Excluding GST as directed by Engineer-in-charge.

Supply Tor/TMT steel of Fe-500 confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works binding the grills with binding wire of 18 to 20 gauge including supply of steel, labour, materials, transportation charges, T&P, taxes, etc. all complete but excluding GST as per the direction of Engineer-in-charge. (NB: No payment shall be made for extra weight than theoretical co-efficient).

Supply of labour, machineries, T&P, single phase power supply unit etc. for core cutting in concrete works of following specifications including cutting in to size perfectly in uniform shape including Port entry fees, all taxes, hire and running charges of all machineries, equipments, Generator (DG Set) for single phase power supply, cost of fuel and consumables, operator expenses etc. all complete excluding GST and as per direction of Engineer in charge.

Providing and laying factory made chamfered edged cement concrete paver blocks of M50 strength and 100 mm thick ,made by table vibratory method using PU mould , laid in required colour & parten over 50 mm thick compacted bed of sand , compacting and proper embedding /laying of inter locking paver blocks into the sand bedding layer throught vibratory compaction by using plate vibrator, filling the joints with sand and cutting the paver blocks as per required size and partern, sweeping the surface etc all complete with supply of material, labour , t&P taxes tollage etc all complete but excluding GST as directed by EIC

Supply,fitting,fixing of 75mm dia PVC pipe transporting,cutting,placing,propoer fixing of PVC pipe with cost & expenses of all materials, tools and plants,machineries,taxes,tollage,Port entry fees etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

SUBRAT KUMAR BEHURA (BID ID -3139143)

M/s. P N Construction (BID ID -3139287)

SANJAY KUMAR UPADHYAY (BID ID -3137575)

Samal Construction (BID ID -3138848)