Supply, Installation, Testing and Commissioning Cattle/Poultry Feed mill plant 1TPH

Supply, Installation,Testing And Commissioning Of Cattle/Poultry Feed Mill Plant 1 TPH

Bucket Elevator - I- Capacity: Minimum 1.5 TPH Suitable for continuous feeding of raw material Lift height: Minimum 12 ft (3.6 m) Motor: Minimum 2 HP, 960 RPM Bucket: MS/HDPE, minimum 2–3 liter Belt width: Minimum 150–200 mm Casing: Minimum 2 mm MS sheet Bearings: UCP 207 or equivalent Belt tensioning arrangement: Yes Belt tracking arrangement: Yes Inspection/cleaning doors: Yes Safety guards: Yes Feed hopper and discharge chute: Included

Feed Grinder- Capacity: Minimum 1.0 TPH Motor: 15 HP Suitable for cattle & poultry feed raw materials Screen perforation: 2.5–4 mm interchangeable screens Screen replacement: Easy removable Rotor: Heavy-duty balanced rotor Hammers: Hardened alloy steel, replaceable Minimum 4-row / suitable hammer arrangement Feed inlet: Suitable for continuous feeding Magnet at feed inlet: Recommended / preferably included Dust outlet/aspiration provision MS heavy-duty construction Safety guard and emergency stop

Bucket Elevator - II- Capacity: Minimum 1.5 TPH Lift height: Minimum 16 ft / 4.8 m Motor: 2 HP, 960 RPM Bucket: MS/HDPE Bucket capacity: 2–3 liter approximately Casing: 2 mm MS Belt width: 150–200 mm Bearings: UCP 207 or equivalent Adjustable belt tension Inspection doors Safety guards Suitable inlet/outlet chutes

Storage Bin above Mixer- Capacity: Minimum 1.5 TPH Lift height: Minimum 16 ft / 4.8 m Motor: 2 HP, 960 RPM Bucket: MS/HDPE Bucket capacity: 2–3 litre approximately Casing: 2 mm MS Belt width: 150–200 mm Bearings: UCP 207 or equivalent Adjustable belt tension Inspection doors Safety guards Suitable inlet/outlet chutes

Feed Mixer- Batch capacity: Minimum 500 kg/batch Throughput: Minimum 1 TPH Motor: 10 HP Type: Horizontal paddle/ribbon mixer Side plate: 5 mm minimum Bottom plate: 5–6 mm Shaft: Heavy-duty MS/EN-series Paddle: Replaceable type Mixing uniformity: CV ≤10% Discharge door: Rack & pinion / pneumatic/hydraulic Door: Full-width discharge Mixing time: 3–6 minutes/batch, adjustable Inspection door: Yes Safety guard: Yes

Storage Bin- Capacity: Minimum 1 Ton or 500 Kg/batch

Paddle Conveyor- Capacity: Minimum 1.5 TPH Motor: 2 HP geared motor Output speed: approximately 40 RPM Length: 3–5 m or as per layout Trough: MS fabricated Thickness: 3 mm minimum Inlet/outlet: suitable for continuous feed Safety cover: Full length Bearings: Heavy-duty Inspection/cleaning openings: Provided

Bucket Elevator – III- Capacity: Minimum 1.5 TPH Height: Minimum 12 ft Motor: 2 HP, 960 RPM Belt width: 150–200 mm Buckets: 2–3 liter HDPE/MS Casing: 2 mm MS Bearings: UCP207 or equivalent Belt tensioning Inspection doors Safety guards Suitable discharge chute

Ring Die Pallet Mill- Capacity: Minimum 800 kg/hr to 1 TPH Main motor: 60 HP Type: Heavy-duty Ring Die Pellet Mill Die hole diameter: 4 mm Interchangeable ring die Roller: Heavy-duty alloy steel Main shaft: Heavy-duty Pellet cutter: Adjustable Feed control: Adjustable Steam conditioner: Included Conditioner motor: 2 HP geared motor Conditioner: SS/MS suitable construction Steam inlet with control valve Pressure gauge Temperature indication Safety guards Lubrication system Main drive: suitable gearbox/direct drive as per manufacturer's design Emergency stop Suitable foundation/support frame