RMO E and M Services installed at DA Staff Qtrs. Karkardooma Delhi. (SH- Electrical works in Division office)

Amount

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. a) Group A

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 1.5 sq mm + 1 X 1.5 sq mm earth wire

2 X 4 sq mm + 1 X 4 sq mm earth wire

2 X 6 sq mm + 1 X 6 sq mm earth wire

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

200 A, 36kA, FPMCCB

250 A, 36kA, FPMCCB

Supplying and fixing of existing damaged fitting into 18 to 20 watt 1200 mm long high efficiency LED linear batten Luminaries having aluminium extruded housing and polycarbonate diffuser within built APFC driver having efficiency of driver 85% power factor > 0.90, THD <20% with minimum 2.5 KV surge protection, LED life with L-70 criteria shall be not less than 50000 burning hours etc. suitable for operation on 150 to 265V single phase A.C. supply, having system efficiency 120 luman per watt. and colour temperature of 6500 K, CRI >80 including connection with 1.5 sq. mm. PVC insulated copper conductor FRLS cable with the help of two nos. fastener Hook, etc. as required.

SITC of 1200 mm sweep ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing M.S flat Fan hook etc. as required. ISI Marked

Supplying, installation, testing and commissioning of heavy duty exhaust fan of 380 mm sweep, 900 RPM confirming to IS 2312/67 complete with louvers and frames in the existing opening including making the hole to suit the size of the above fan, making good the damage, connections, earthing etc, as required.

Replacement of defective/ worn-out fitting with new LED Flood light fitting luminaries of rating 45 to 50 watts or more made •with high pressure die cast aluminiun') housing with powder coated with lens, IP-66 suitable for operation on 150 to 265V single phase AC supply having system efficiency 130 lumen per watt or more and colour temperature of 5500 K to 6000K CRl>70 with driver having power factor >0.95, THD<10 % and efficiency >85% potted driver silould be IC compliance with minimum 10 KV surge protection LED life shall bl not less than 50000 burning hours. complete etc including suitable size arrangement for fix ing and connection , testing & commissioning complete as required.

Providing and fixing of 36 to 40-watt surface mounted LED Luminaries of size 1200 mm (Length) x 300 mm (Width) housing made with white powder coated CRCA sheet metal and polycarbonate diffuser suitable for operation on 150 to 265V single phase A.C. supply, having system efficiency not less than 120 luman per watt. and colour temperature of 5700-6500 K, CRI >80 with APFC driver having power factor > 0.90, THD <20% and efficiency > 85% driver should be IC Compliant, with minimum 2.5 KV surge protection, LED life with L-70 criteria shall be not less than 50000 burning hours etc. including connection with 1.5 sq. mm. PVC insulated copper conductor FRLS cable with the help of 4 nos. fastener Hook, Clutch wire and sleeve etc. i/c making connections, testing, commissioning etc. complete as required.

Supplying and laying of one no. 3 x 10 sq. mm alumnium conductor PVC insulated and PVC sheated XLPE Power cable 1.1 KV grade in the existing on surface etc. as required.

Credit of dismantled material

Old Ceiling /Exhaust fan

LED fittings

VIMLESH CHANDRA KASHYAP

Guru enterprises

CHETAN ENTERPRISES

Vibhor Associates

Goel electric works

M/S HIMANSHU ELECTRICAL

VIKAS ENGG WORKS