WBPWD/EE/CKHED/ eNIT-33/24-25 2nd call

Amount

Supply & Delivery of 7.5 TR capacity concealed type Split Air Conditioner of rated cooling capacity of 90000 Btu/Hr. With 2 Nos. Rotary compressor, 3 Nos. Indoor Units of rated power supply 230V-1ph-50 Hz,1 no ODU of rated power supply- 415 V, ± 5%, 50 Hz. three phase AC supply.Air flow/per IDU-1000cfm(make Hitachi)(Wired Type Remote)

Supply & Delivery of 3.0 TR capacity concealed type Split Air Conditioner of rated cooling capacity of 36000 Btu/Hr. With 2 Nos. Rotary compressor, 2Nos. Indoor Unit of rated Power Supply 230V-1Ph-50Hz., 1No Outdoor unit of rated power supply 230V-1 Phase-50Hz. Refrigerant- R410A ( Make:- Hitachi/Daikin/Carrier) (Wireless Remote)

Erection and Commissioning Charges for the Above Mentioned 7.5 Ton Concealed Type Split Air Conditioner . Incl Charges For Hanging Arangments by 6 mm thick M.S U channel.

Erection and Commissioning Charges for the Above Mentioned 3.0 Ton Con Type Split Air Conditioner . Incl Charges For Hanging Agreements.

Installation and Commissioning of copper refrigerant piping, complete with fitting, elbows, bends, supporting arrangement on walls for Liquid Line 3/8" OD with .7mm thick.

Installation and Commissioning of copper refrigerant piping, complete with fitting, elbows, bends, supporting arrangement on walls for Suction Line 5/8" OD with .7mm thick.

Supply & Fixing Pipe Insulation in Liquid line 3/8" with 9mm nitrile rubber tube Suction Line.Incl Charges for Rapping the whole Pipe.

Supply & Fixing Pipe Insulation in Liquid line 5/8" with 9mm nitrile rubber tube Suction Line.Incl Charges for Rapping the whole Pipe.

Control copper Cabling from Condensing to Unit and control panel a) 4 core 2.5 sq.mm communication cable

Lifting ,Shifting Charges for Concealed Split Air Conditioner including scaffolding charge for installation of OD unit as per direction of EIC.(Ground Fl to 4th Fl )

Charges for Drain Pipe work Incl Charges 32mm dia PVC/HDPE harded pipes with Insulation, fitting, accessories, bends, elbows, tees, flanges, tappings, wall sleeves, hangers, supports, anchors. and after the work cementing the same.

Supplying, fabrication & fixing 3Nos. M.S u-channel of 6 mm thick of size (75 mm x 40 mm x 40 mm) of 2 m. length for making platform for installation of outdoor unit of 7.5/3.0 Tr Concealed Type split AC incl. drilling 2 nos holes in each channel including cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with horizontal angle of 25 mm x 25 mm x 6 mm including supporting angle 50 mm x50mm x 6 mm in each platform in outer edge, for transmitting the load centrally through 2Nos.(50 mm x 50 mm x 6 mm) Angle inserted into the exiting wall. The entire platform should be baricated& safe for ODU maintenance. Area of the platform is 3 Mtr. x 1.5 Mtr.

Suppy & fixing of M.S grill Guard suitable for above mention outdoor unit Size of 3 mtrX 1 mtr X 1 mtr with locking arrangement with supply of 8 lever 4 key lock Make: Godrej

Charges for drop ceiling to cover the indoor units made of gypsum

charges for trap door made of aluminium channel & ply wood for IDU maintenance.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Havelles/Finnolex) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

i) 4 x 84/0.3 (6 sqmm) + 2 x 56/0.3 (4 sqmm) ECC VTPNDB to AC (E-14,1(b),v)

ii) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC for computer board & power board (E-14,1(a),ii)

iii) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC TPN to AC (E-14,1(a),iv)

iv) 2 x 22/0.3 (1.5 sqmm)+1 x 22/0.3 (1.5 sqmm) ECC (E-14,1(a),i)

Dismatling the exisiting tubelight in carefully and refixing the same single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with Z Clamp and suitable size MS fastener, Ceiling plate, ceiling rose nipples etc. as required

Supply of 240V. Single LED tube light Fittings complete with all accessories (Make: Philips; Cat No. TMC 501 P 1xT-LED 22W P 3242) incl. supply of 1 no. 20W LED Tube light (Master Led 18W865 T8 2100lm)

Supply of 415V, 3Phase Timer DB(equivalent of 2+12 way SPN Double Door DB in size) with steel sheet enclosure double door, phosphitised powder coated, neutral bar, Din Rail with IP- 43 protection comprises with 1 No.63A FP MCB('C" Curve,10KA),MNX 40 Contactor,25 A Starter,1 No.24 hours programming Time Switch( L&T/ Aproved make) with 15 min minimum switching time of any time and any day and 1no 32A 3Pole contractor(Make- L&T/Approved) complete with internal wiring by suitable sizze of copper wire and Provision for earthing attachment including LED indication light for running condition with locking arrangement & including ON/OFF push button ( Make- L&T/Approved). (Non schedule)

Supply of 230 V Timer DB(equivalent of 2+10 way SPN Double Door DB in size) with steel sheet enclosure double door, phosphitised powder coated, neutral bar, Din Rail with IP- 43 protection comprises with 1 No.25 A DP MCB('C" Curve,10KA),1 No.24 hours programming Time Switch( L/T) with 15 min minimum switching time of any time and any day and 1no 32A 3Pole contractor(Make- L/T) complete with internal wiring by suitable sizze of copper wire and Provision for earthing attachment including LED indication light for running condition with locking arrangement & including ON/OFF push button ( Make-Hager). (Non schedule)

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Anchor) on sheet metal switch board embedded in wall incl. S & F 240x 200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (E-7,26)

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Anchor) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (E-6,22)

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Anchor) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (E-6,21)

Supply & fixing 4 pole MCB enclosure with 1no. 415V 63 Amp 4-pole MCB (Legrand/SIEMENS/ABB) to be fixed concealed in wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment as per direction of E.I.C (D-9/11)(D-6/7))

Supply & fixing 4 pole Outdoor type enclosure (SINTEX-3020) with 1no. 415V 63 Amp 4-pole Isolator(Legrand/SIEMENS/ABB) to be fixed concealed in wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment as per direction of E.I.C (Non schedule)

Supply & fixing 2 pole MCB enclosure with 1no. 230 V 25/32 Amp 2-pole MCB(Legrand/SIEMENS/ABB) to be fixed concealed in wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment as per direction of E.I.C (D-9/11)(D-6/7)

Supply & fixing 2 pole Outdoor type enclosure ( Sintex-3020) with 1no. 230 V 25/32 Amp 2-pole Isolator(Legrand/SIEMENS/ABB) to be fixed concealed in wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment as per direction of E.I.C (Sintex Box, D-6/7)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

i)6 sqmm

ii) 4 sqmm

iii) 2.5 sqmm

iv) 1.5 sqmm

Rate should be quoted including of all taxes, duty and cess

Defect Liability period : 1 year

FUTURE SOLAR SYSTEMS (BID ID -5646974)

RAJA & S S COMPANY (BID ID -5647561)