Supply and fixing kitchen equipment in GF kitchen at Hotel Gangaur Jaipur

Amount

FABRICATING, PROVIDING & INSTALLATION OF TRAY RAIL STAND SIZE : 45"x12"x2" (MAKE IN S.S. 304 GRADE 25x25 mm SQUARE PIPE & S.S. SHEET BRACKET FIXINF IN DISH LANDING TABLE WITH NUTT BOLT)

FABRICATING, PROVIDING & INSTALLATION OF DISH LANDING TABLE SIZE: 74"x24"x34" (MAKE - TOP S.S. 304 GRADE SHEET 18 SWG FIXING IN MS 35x35x5 mm ANGLE FRAME WITH NUTT BOLT. ONE GARBGE SHOUT IN RIGHT SIDE. LEGS 38x38x12 mm SS PIPE WITH NYLON ADJUSTABLE FEET & 2 SIDE BRACING IN BOTH SIDE & FRONT SIDE COVERING BY SS SHEET)

FABRICATING, PROVIDING & INSTALLATION OF OVER HEAD SHELF FOR GLASS BASKET SIZE : 78"x18"21" (MAKE - SS SHEET 304 GRADE 18/20 SWG & LEGS PIPE 25 mm DIA. SHELF FIX IN SS GULLY WELDED WITH GARBAGE TOP)

FABRICATING, PROVIDING & INSTALLATION OF THREE SINK UNIT OVERALL SIZE : 66"x27"x34"+6" SINK SIZE : 18"x18"x15" (MAKE - TOP SS 304 GRADE SHEET FIXING IN 35x35x5 mm MS ANGLE FRAME WITH NUT + BOLT. LEGS IN 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & 3 SIDE BRACING BY 25x25 mm SS PIPE. FIXING 3 NOS. WASTE COUPLING IN ALL SINK)

FABRICATING, PROVIDING & INSTALLATION OF CLEAN DISH TABLE WITH 1 UNDER SHELF SIZE : 54”x24”x34”+6”+6” (MAKE - TOP IN SS 304 GRADE 18 SWG SHEET. TOP FIXING IN 35x35x5 mm MS FRAME WITH NUTT BOLT. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & ONE UNDER SHELF IN SS SHEET 20 SWG. BACK SIDE & RIGHT SIDE BACK SPLASH )

FABRICATING, PROVIDING & INSTALLATION OF WALL SHELF SIZE : 54"x12"x2" (MAKE - SHELF IN SS SHEET 20 SWG. BRACKET IN 20/18 SWG SHEET)

FABRICATING, PROVIDING & INSTALLATION OF CLEAN DISH RACK SIZE : 44"x18"x72" (MAKE - SHELF IN SS SHEET 304 GRADE WITH 3 SIDE UP & FRONT SIDE DOWN. LEGS IN 38x38x12 mm SS PIPE WITH NAYLON ADJUSTABLE FEET 5 NOS SHELF)

FABRICATING, PROVIDING & INSTALLATION OF POT RACK (PIPE) SIZE : 48"x18"x72" (MAKE - SHELF IN OUTER 25x25x1.2 mm SS PIPE & INNER 15x15x1.2 mm SS PIPE. TOTAL 4 NOS. SHELF LEGS IN 38x38x1.2 mm SS PIPE WITH ADJUSTABLE FEET)

FABRICATING, PROVIDING & INSTALLATION OF POT WASH SINK OVERALL SIZE : 45"x36"x30" (MAKE - TOP SS 304 GRADE SHEET 16 SWG FIXING IN 35x35x5 mm ANGLE FRAME WITH NUTT BOLT. LEGS IN 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET. BOTTEM ALL SIDE CROSS BRACING BY 25x25 mm SS PIPE. ONE NOS. WASTE COUPLING IN SINK)

FABRICATING, PROVIDING & INSTALLATION OF WALL SHELF (PIPE) SIZE : 45"x18"x2" (MAKE - SHELF IN OUTER 25x25x1.2 mm SS PIPE & INNER 15x15x1.2 mm SS PIPE. TOTAL 4 NOS. SHELF LEGS IN 38x38x1.2 mm SS PIPE WITH ADJUSTABLE FEET)

FABRICATING, PROVIDING & INSTALLATION OF WORK TABLE WITH 1 UNDER SHELF SIZE : 27"x36"x34"+6" (MAKE - TOP IN SS 304 GRADE 18 SWG SHEET. TOP FIXING IN 35x35x5 mm MS FRAME WITH NUTT BOLT. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & ONE UNDER SHELF IN SS SHEET 20 SWG. BACK SIDE & RIGHT SIDE BACK SPLASH )

FABRICATING, PROVIDING & INSTALLATION OF WALL SHELF SIZE : 27"x12"x2" (MAKE - SHELF IN SS SHEET 20 SWG. BRACKET IN 20/18 SWG SHEET)

FABRICATING, PROVIDING & INSTALLATION OF WORK TABLE WITH 2 UNDER SHELF SIZE : 44"x24"x34"+6" (MAKE - TOP IN SS 304 GRADE 18 SWG SHEET. TOP FIXING IN 35x35x5 mm MS FRAME WITH NUTT BOLT. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & TWO UNDER SHELF IN SS SHEET 20 SWG. BACK SPLASH)

FABRICATING, PROVIDING & INSTALLATION OF WALL SHELF SIZE : 44"x12"x2" (MAKE - SHELF IN SS SHEET 20 SWG. BRACKET IN 20/18 SWG SHEET)

FABRICATING, PROVIDING & INSTALLATION OF WORK TABLE WITH 1 UNDER SHELF SIZE : 44"x24"x34"+6"+6" (MAKE - TOP IN SS 304 GRADE 18 SWG SHEET. TOP FIXING IN 35x35x5 mm MS FRAME WITH NUTT BOLT. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & ONE UNDER SHELF IN SS SHEET 20 SWG. BACK SIDE & RIGHT SIDE BACK SPLASH )

FABRICATING, PROVIDING & INSTALLATION OF TWO BURNER COOKING RANGE SIZE : 44"x24"x34"+6" (MAKE - TOP IN SS 304 GRADE SHEET. FIXING IN 35x35x5 mm MS ANGLE FRAME WITH NUTT BOLT. LEGS IN 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET. COERING IN SS SHEET. 2 NOS MS MAST IRON PEN SUPPORT. 2 NOS HIGH PRESSURE BURNER WITH SEPERATE CONTROL VALVE. 1 NOS PILOT BURNER. BOTTOM SHELF)

FABRICATING, PROVIDING & INSTALLATION OF SINK TABLE SIZE : 21"x24"x34"+6" (MAKE - TOP IN SS 304 GRADE SHEET FIXING IN 35x35x5 mm MS ANGLE FRAME WITH NUT BOLT. SINK IN CENTER. 3 SIDE CROSS BRASING WITH 25 mm PIPE. LEGS IN 38X38X1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET. BACK SPLASH 150 mm HEIGHT)

FABRICATING, PROVIDING & INSTALLATION EXHAUST HOOD WITH FILTER SIZE : 120"x42"x21" (MAKE - MAKE IN SS SHEET 20/22 SWG. BUFFELOW FILTER IN FULL LENGTH. LIGHT WITH TUFFEN GLASS. UPSIDE OPENING FOR EXHAUST DUCT CONNECTION. HANGING WITH MS ROD & FASTENERS. OIL COLLECTION DRIP TRAY.)

FABRICATING, PROVIDING & INSTALLATION WORK TABLE WITH 2 UNDER SHELF SIZE : 40"x18"x34"+6" (MAKE - TOP IN SS 304 GRADE 18 SWG SHEET. TOP FIXING IN 35x35x5 mm MS FRAME WITH NUTT BOLT. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & TWO UNDER SHELF IN SS SHEET 20 SWG. BACK SPLASH)

FABRICATING, PROVIDING & INSTALLATION WORK TABLE WITH 2 UNDER SHELF SIZE : 66"x24"X34" (MAKE - TOP IN SS 304 GRADE 18 SWG SHEET. TOP FIXING IN 35x35x5 mm MS FRAME WITH NUTT BOLT. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & TWO UNDER SHELF IN SS SHEET 20 SWG.)

FABRICATING, PROVIDING & INSTALLATION PICK UP OVER HEAD SHELF SIZE : 66"x12"x12"+10" (MAKE - 2 NOS. SHELF MAKE IN 20/22 SS SHEET. HEATING ELEMENT IN UPPER SHELF WITH ON/OFF SWITCH. LEGS IN 25 mm SS PIPE)

FABRICATING, PROVIDING & INSTALLATION DISH STORAGE CABINET SIZE : 66"x15"x32"+1" (MAKE - TOP IN SS SHEET 20/22 SWG & 3 SIDE COVERING IN 20/22 SWG & UNDER SHELF 2 NOS. IN SS SHEET. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET)

FABRICATING, PROVIDING & INSTALLATION ROOM SERVICE TRAY SET UP COUNTER SIZE : 44"x24"x34"+6" (MAKE - TOP IN SS 304 GRADE 18 SWG SS SHEET. 3 SIDE COVERING. 2 UNDER SHELF IN SS SHEET. ONE DRAWER IN LEFT SIDE & RIGHT SIDE. BELOW SPACE FOR TRAY SLIDE. LEGS IN 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET)

FABRICATING, PROVIDING & INSTALLATION WALL SHELF SIZE : 44"x15"x2" (MAKE - SHELF IN SS SHEET 20 SWG. BRACKET IN 20/18 SWG SHEET)

FABRICATING, PROVIDING & INSTALLATION WORK TABLE WITH 1 UNDER SHELF SIZE : 44"x24"x34"+6" (MAKE - TOP IN SS 304 GRADE 18 SWG SHEET. TOP FIXING IN 35x35x5 mm MS FRAME WITH NUTT BOLT. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & ONE UNDER SHELF IN SS SHEET 20 SWG. BACK SPLASH )

FABRICATING, PROVIDING & INSTALLATION WORK TABLE WITH 2 UNDER SHELF SIZE : 44"x24"x34"+6" (MAKE - TOP IN SS 304 GRADE 18 SWG SHEET. TOP FIXING IN 35x35x5 mm MS FRAME WITH NUTT BOLT. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & TWO UNDER SHELF IN SS SHEET 20 SWG. BACK SPLASH)

FABRICATING, PROVIDING & INSTALLATION WORK TABLE WITH SINK SIZE : 44"x24"x34"+6" (MAKE - TOP IN SS 304 GRADE SHEET FIXING IN 35x35x5 mm MS ANGLE FRAME WITH NUT BOLT. SINK IN CENTER. 3 SIDE CROSS BRASING WITH 25 mm PIPE. LEGS IN 38X38X1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET. BACK SPLASH 150 mm HEIGHT. ONLY SINK ON LEFT SIDE)

FABRICATING, PROVIDING & INSTALLATION WORK TABLE WITH 2 UNDER SHELF SIZE : 44"x24"x34"+6" (MAKE - TOP IN SS 304 GRADE 18 SWG SHEET. TOP FIXING IN 35x35x5 mm MS FRAME WITH NUTT BOLT. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & TWO UNDER SHELF IN SS SHEET 20 SWG. BACK SPLASH)

FABRICATING, PROVIDING & INSTALLATION HAND WASH SINK SIZE : 12"x12" (MAKE : S.S. SHEET 20 SWG. COERING IN 3 SIDE)

FABRICATING, PROVIDING & INSTALLATION WORK TABLE WITH 1 UNDER SHELF SIZE : 69"x20"x34"+6"+6" (MAKE - TOP IN SS 304 GRADE 18 SWG SHEET. TOP FIXING IN 35x35x5 mm MS FRAME WITH NUTT BOLT. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & ONE UNDER SHELF IN SS SHEET 20 SWG. BACK SIDE & RIGHT SIDE BACK SPLASH)

FABRICATING, PROVIDING & INSTALLATION HOT PLATE SIZE : 33"x36"x34"+6" (MAKE - TOP IN 16 mm MS PLATE WITH 3 SIDE SPLASH. COVERING BY 22 SWG SS SHEET & FRAME IN 35x35x5 mm MS ANGLE. LEGS 38x38x1.2 mm SS PIPE & BOTTEM SHELF IN SS. NYLON ADJUSTABLE BULLET FEET. 2 NOS. RV BURNER WITH ONE PILOT BURNER & CONTROL VALVE)

FABRICATING, PROVIDING & INSTALLATION CONTINENTAL RANGE SIZE : 36"X36"x34"+6" (MAKE - TOP 16 SWG SS 304 GRADE SHEET. FRAME 35x35x5 mm MS ANGLE WITH NUTT BOLT. COVERING IN 22 SWG SS SHEET : BELOW OVEN ELECTRIC ELECTRIC OPERATED. HEAVY DUTY CAST IRON PAN SUPPORT. 4 NOS HIGH PRESSURE BURNER WITH ONE PILOT BURNER WITH SEPRATE NCV. SS DRIP TRAY. PIPE LEGS WITH NYLON BULLET FEET.)

FABRICATING, PROVIDING & INSTALLATION CHINESE RANGE SIZE : 51"x36"x34"+18" (MAKE - TOP IN 16 SWG SS 304 GRADE SHEET. FRAME 35x35x5 mm MS ANGLE WITH NUTT BOLT COVERING IN 22 SWG SHEET. BACK SPLASH 18" HEIGHT. FRONT SIDE WATER PIPE WITH VALVE. 2 NOS CAST IRON ROUND PAN SUPPORT WITH HIGH PRESSURE BURNER WITH PILOT BURNER. ONE NO. BACK SIDE BURNER. SS PIPE LEGS WITH CROSS BRACING. IN TOP BACK SIDE DRAIN THROUGH IN FULL LENGTH)

FABRICATING, PROVIDING & INSTALLATION WORK TABLE WITH 2 UNDER SHELF & FRONT SIDE COVERING SIZE : 69"x24"x34" (MAKE - TOP IN SS 304 GRADE 18 SWG SHEET. TOP FIXING IN 35x35x5 mm MS FRAME WITH NUTT BOLT. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & TWO UNDER SHELF IN SS SHEET 20 SWG. BACK SPLASH. FRONT SIZE COVERING)

FABRICATING, PROVIDING & INSTALLATION PICK UP OVER HEAD SHELF SIZE : 66"x12"x12" (MAKE - 2 NOS. SHELF MAKE IN 20/22 SS SHEET. HEATING ELEMENT IN UPPER SHELF WITH ON/OFF SWITCH. LEGS IN 25 mm SS PIPE)

FABRICATING, PROVIDING & INSTALLATION EXHAUST HOOD WITH FILTER SIZE : 134"x48"x21" (MAKE - MAKE IN SS SHEET 20/22 SWG. BUFFELOW FILTER IN FULL LENGTH. LIGHT WITH TUFFEN GLASS. UPSIDE OPENING FOR EXHAUST DUCT CONNECTION. HANGING WITH MS ROD & FASTENERS. OIL COLLECTION DRIP TRAY.)

FABRICATING, PROVIDING & INSTALLATION WORK TABLE WITH 2 UNDER SHELF & FRONT SIDE COVERING SIZE : 44"x24"x34" (MAKE - TOP IN SS 304 GRADE 18 SWG SHEET. TOP FIXING IN 35x35x5 mm MS FRAME WITH NUTT BOLT. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & TWO UNDER SHELF IN SS SHEET 20 SWG. BACK SPLASH. FRONT SIZE COVERING)

FABRICATING, PROVIDING & INSTALLATION PICK UP OVER HEAD SHELF SIZE : 44"x12"x12" (MAKE - 2 NOS. SHELF MAKE IN 20/22 SS SHEET. HEATING ELEMENT IN UPPER SHELF WITH ON/OFF SWITCH. LEGS IN 25 mm SS PIPE)

FABRICATING, PROVIDING & INSTALLATION WORK TABLE WITH 1 UNDER SHELF SIZE : 18"x36"x34"+6" (MAKE - TOP IN SS 304 GRADE 18 SWG SHEET. TOP FIXING IN 35x35x5 mm MS FRAME WITH NUTT BOLT. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & ONE UNDER SHELF IN SS SHEET 20 SWG. BACK SPLASH )

FABRICATING, PROVIDING & INSTALLATION CHAPATI PLATE SIZE : 36"x36"x34"+6" (MAKE - TOP IN 16 mm MS PLATE WITH 3 SIDE SPLASH. COVERING BY 22 SWG SS SHEET & FRAME IN 35x35x5 mm MS ANGLE. LEGS 38x38x1.2 mm SS PIPE & BOTTEM SHELF IN SS. NYLON ADJUSTABLE BULLET FEET. 2 NOS. RV BURNER WITH ONE PILOT BURNER & CONTROL VALVE)

FABRICATING, PROVIDING & INSTALLATION WORK TABLE WITH 2 UNDER SHELF SIZE : 24"x36"x34"+6" (MAKE - TOP IN SS 304 GRADE 18 SWG SHEET. TOP FIXING IN 35x35x5 mm MS FRAME WITH NUTT BOLT. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & TWO UNDER SHELF IN SS SHEET 20 SWG. BACK SPLASH)

FABRICATING, PROVIDING & INSTALLATION S.S. TANDOOR SIZE : 36"x36"x34"+6" (MAKE - TOP IN SS SHEET & COVERING IN SS SHEET. INNER BODY IN MS ANGLE & MS SHEET. GLASS WOOL INULLATION, CASTER WHEEL WITH BREAK)

FABRICATING, PROVIDING & INSTALLATION WORK TABLE WITHOUT UNDER SHELF SIZE : 42"x24"x34"+6" (MAKE - TOP IN 18 SWG SS SHEET 304 GRADE. FRAME IN 35x35x5 mm MS ANGLE FIX WITH NUTT BOLT IN TOP. LEGS IN 38x38x1.2 mm SS PIPE & 3 SIDE CROSS BRACING IN 25 mm PIPE)

FABRICATING, PROVIDING & INSTALLATION WORK TABLE WITH SINK SIZE : 44"x24"x34"+6" (MAKE - TOP IN SS 304 GRADE SHEET FIXING IN 35x35x5 mm MS ANGLE FRAME WITH NUT BOLT. SINK IN CENTER. 3 SIDE CROSS BRASING WITH 25 mm PIPE. LEGS IN 38X38X1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET. BACK SPLASH 150 mm HEIGHT. ONLY SINK ON LEFT SIDE)

FABRICATING, PROVIDING & INSTALLATION WORK TABLE WITH 2 UNDER SHELF SIZE : 66"x24"x34"+6" (MAKE - TOP IN SS 304 GRADE 18 SWG SHEET. TOP FIXING IN 35x35x5 mm MS FRAME WITH NUTT BOLT. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & TWO UNDER SHELF IN SS SHEET 20 SWG. BACK SPLASH)

FABRICATING, PROVIDING & INSTALLATION WALL SHELF SIZE : 66"x18"x2" (MAKE - SHELF IN SS SHEET 20 SWG. BRACKET IN 20/18 SWG SHEET)

FABRICATING, PROVIDING & INSTALLATION WORK TABLE WITH 2 UNDER SHELF SIZE : 44"x24"x34"+6" (MAKE - TOP IN SS 304 GRADE 18 SWG SHEET. TOP FIXING IN 35x35x5 mm MS FRAME WITH NUTT BOLT. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & TWO UNDER SHELF IN SS SHEET 20 SWG. BACK SPLASH)

FABRICATING, PROVIDING & INSTALLATION WORK TABLE WITH 2 UNDER SHELF & FRONT SIDE COVERING SIZE : 44"x24"x34" (MAKE - TOP IN SS 304 GRADE 18 SWG SHEET. TOP FIXING IN 35x35x5 mm MS FRAME WITH NUTT BOLT. LEGS 38x38x1.2 mm SS PIPE WITH NYLON ADJUSTABLE FEET & TWO UNDER SHELF IN SS SHEET 20 SWG. BACK SPLASH. FRONT SIZE COVERING)

FABRICATING, PROVIDING & INSTALLATION PICK UP OVER HEAD SHELF SIZE : 44"x12"x12" (MAKE - SHELF IN 20 SWG SS SHEET)

Description of Work / Item(s)

Amount

SUPPLY, INSTALLATION & TESTING OF AIR WASHER MACHINE FOR FRESH AIR SUPPLY IN GROUND FLOOR KITCHEN. KITCHEN MACHINE TECHNICAL DETAIL - AIR WASHER MACHINE - CAPACITY : 10,000 CFM BLOWER : 560 mm DIA (FORWARD). MAKE : NIKOTRA MOTOR : 5 HP, MAKE : CROMPTON PUMP COOLING PAD GREEN / BROWN 8" THICK STATER MAKE : L&T / MILLBORN (WITH COMPLETE CABLE FROM MACHINE TO PANEL) BOSY : 20 SWG / MM POWDERCOATED BODY SIZE : 59"x80"x70" H

SUPPLY, INSTALLATION & TESTING OF AIR SCRUBER MACHINE FOR AIR RETURN (EXHAUST) IN GROUND FLOOR KITCHEN. MACHINE RETUEN DETAIL - AIR SCRUBER MACHINE - CAPACITY : 12,000 CFM RETURN EXHAUST BLOWER : 630 mm DIA (FORWARD), MAKE : NIKOTRA MOTOR : 7.5 HP 3 PH, MAKE : CROMPTON, 1440 RPM BODY : 20 SWG / MM WITH POWDERCOATED OPERATING PANEL (7.5 HP), MAKE : L&T (WITH COMPLETE CABLE FROM MACHINE TO PANEL) BODY SIZE : 72"x60"x66" H

FABRICATING, INSTALLATION & TESTING OF DUTING WORK FOR AIR VENTILATION SYSTEM IN GROUND FLOOR KITCHEN. DUCTING FROM KITCHEN TO AIR WASHER & AIR SCREBER MACHINE. DUCT MAKE IN GP SHEET 22/24 SWG SUPPORT WITH ROD OR ANGLE. DUCT CONNECTING WITH EXHAUST HOOD & AIR SCRUBER. APPROXIMATE 1800 SQ.FT.

FABRICATING, INSTALLATION & TESTING OF FRESH AIR GRILL (ALUMINIUM) SIZE : 24"x10

Description of Work / Item(s)

Amount

SUPPLY, INSTALLATION & TESTING OF LPG PIPE LINE INSTALLATION WORK IN GROUND FLOOR KITCEN WITH FOLLOWING JOB :

FABRICATING, PROVIDING & FIXING OF LPG MANIFOLD FOR 10 CYLINDERS. MAKE M.S. PIPE 25 mm DIA WITH 10 NOS NRV, 10 NOS ADAPTOR, 10 NOS CYLINDER PIGATIL FLEXIBLE & 1 NOS BALL VALVE 25 mm DIA MAKE L&T

PROVIDING & FIXING OF PRESSURE GAUGE WITH VALVE

PROVIDING & FIXING OF Ist STAGE REGULATOR STATION. HIGH PRESSURE REGULATOR 20 PSI ONE NO, BALL VALVE 15 mm DIA 2 NOS MAKE L&T, LPF FILTER 1 NOS IN ONE SET

PROVIDING & FIXING OF FLASH BACK ARRESTOR WITH BALL VALVE

PROVIDING & FIXING OF IInd STAGE REGULATOR STATION. HIGH PRESSURE REGULATOR 15 PSI ONE NO, BALL VALVE 15 mm DIA 2 NOS MAKE L&T

PROVIDING & FIXING OF IIIrd STAGE REGUL;ATOR STATION. HIGH PRESSURE REGULATOR 5 PSI ONE NO, BALL VALVE MAKE L&T

PROVIDING & FIXING OF MAIN LINE VALVE

PROVIDING & FIXING OF BURNER PIGATIL FLEXIBLE

PROVIDING & FIXING & INSTALLATION OF MAIN LINE IN M.S. "C" CLASS PIPE WITH COMPLETE FITTING LIKE : TEE, ELBOW, SOCKET, REDUSER & CLAMP

SIZE : 25 mm DIA NB

SIZE : 15 mm DIA NB

PIPE LINE PRESSURE TESTING

Description of Work / Item(s)

Amount

S.S. TRAY SET WITH PIPE & SIDE SUPPORT ANGLE SIZE : 24"x18"xHeight as per site (Greas chamber)

Description of Work / Item(s)

Amount

PROVIDING & FIXING OF IInd STAGE REGULATOR STATION HIGH PRESSURE REGULATOR 15 PSI ONE NO, BALL BALVE 2 NO MAKE L&T

PROVIDING & FIXING OF IIIrd STAGE REGULATOR STATION HIGH PRESSURE REGULATOR 5 PSI ONE NO, BALL BALVE 1 NO MAKE L&T

PROVIDING & FIXING OF PRESSURE GAUGE WITH VALVE

Bharti Refrigeration Works (BID ID -3023395)

PRIDE COMMERCIAL KITCHEN EQUIPMENTS (BID ID -3018331)

AEROVENT HVAC SYSTEMS (BID ID -3028590)

RATHORE KITCHEN EQUIPMENTS CO. (BID ID -3029801)

THAR AIR COOL (BID ID -3032074)

HARSH KITCHEN CRAFTS (BID ID -3029802)

COOL HOME INDIA (BID ID -3027040)

RATHORE KITCHEN EQUIPMENTS CO. (BID ID -3029801)

HARSH KITCHEN CRAFTS (BID ID -3029802)

Bharti Refrigeration Works (BID ID -3023395)

THAR AIR COOL (BID ID -3032074)

AEROVENT HVAC SYSTEMS (BID ID -3028590)

AEROVENT HVAC SYSTEMS (BID ID -3028590)

HARSH KITCHEN CRAFTS (BID ID -3029802)

COOL HOME INDIA (BID ID -3027040)

THAR AIR COOL (BID ID -3032074)

Bharti Refrigeration Works (BID ID -3023395)

PRIDE COMMERCIAL KITCHEN EQUIPMENTS (BID ID -3018331)

RATHORE KITCHEN EQUIPMENTS CO. (BID ID -3029801)

HARSH KITCHEN CRAFTS (BID ID -3029802)

THAR AIR COOL (BID ID -3032074)

AEROVENT HVAC SYSTEMS (BID ID -3028590)

COOL HOME INDIA (BID ID -3027040)

PRIDE COMMERCIAL KITCHEN EQUIPMENTS (BID ID -3018331)

AEROVENT HVAC SYSTEMS (BID ID -3028590)

RATHORE KITCHEN EQUIPMENTS CO. (BID ID -3029801)

HARSH KITCHEN CRAFTS (BID ID -3029802)

PRIDE COMMERCIAL KITCHEN EQUIPMENTS (BID ID -3018331)

THAR AIR COOL (BID ID -3032074)

COOL HOME INDIA (BID ID -3027040)