RequiredExperience with Government
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate Bid to RA enabled No Mobile Toilet ( 1 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Mode of Supply Assembled Ready To Use Assembled Ready To Use Number of Compartments 10-seater mobile toilet 10-seater mobile toilet Type of WC Indian with ceramic base Indian with ceramic base Number of WC 10 10 Number of Bathrooms 0 0 1/8 Number of Urinals 0 0 Water facility By mean of overhead tank(Capacity 1200Ltrs) By mean of overhead tank(Capacity 1200Ltrs) Wash basin 2 Nos. outside the Unit with common facility 2 Nos. outside the Unit with common facility Sewage facility Sludge tank (capacity-1200ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 10-seater) Sludge tank (capacity-1200ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 10-seater) ventilation Full size cross ventilation Full size cross ventilation Top(roof) shape Slanting/tapper * Projection of Roof NO projection NO projection Installation and commissioning To be done by seller To be done by seller Plumbing and Sanitation fitting connections To be done by seller To be done by seller Electrical connections To be done by seller To be done by seller Waste extraction fitting To be done by seller To be done by seller Civil foundation No foundation required No foundation required TRAILER STRUCTURAL MATERIAL Trailer frame(Chassis) material with support material including pathway 100mm X 50mm C- channel MS - 75mm X 37.5mm C-channel MS - 40mm X 40mm X 5mm (thick) MS angle - 40mm X 40mm X 5mm (thick) MS Tee - 35mm X 35mm X 5mm (thick) MS angle and 25mm X 25mm X 3mm (thick) MS angle for 4-seater/6 -seater/8-seater and 10-seater 100mm X 50mm C- channel MS - 75mm X 37.5mm C-channel MS - 40mm X 40mm X 5mm (thick) MS angle - 40mm X 40mm X 5mm (thick) MS Tee - 35mm X 35mm X 5mm (thick) MS angle and 25mm X 25mm X 3mm (thick) MS angle for 4-seater/6 -seater/8-seater and 10-seater Railing material 38mm X 25mm MS pipe of thickness 1.2-1.5mm (for 4-seater
Required6-seater
Required8-seater & 10-seater) 38mm X 25mm MS pipe of thickness 1.2-1.5mm (for 4-seater
Required6-seater
Required8-seater & 10-seater) Trailer understructure Spring leaves 914mm with 13 leaves for 8-seater and 10-seater Spring leaves 914mm with 13 leaves for 8-seater and 10-seater Turn table/rotor 100mm X 50mm MS channel and 10mm * 2/8 thick MS plate plus spring ply 40mm X 5mm Pathway passage/slide platform Aluminum chequerd sheet having width of 455mm * Stairs frame material 35mm x 35mm X 5mm MS angle and 25mm x 25mm x 3mm MS angle with 25mm x 3mm MS Flat * Stairs size 710mm X 230mm having 4-step for 1420mm Height and 735mm width stair * Locking Locking pins to be provided for lock the platform * Tow bar Made of 100 X 50 mm channel section with easy detachable and connect with turn table Made of 100 X 50 mm channel section with easy detachable and connect with turn table FRAME MATERIAL Side panel frame material 35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle (for 4-seater 6-seater/8-seater & 10-seater) 35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle (for 4-seater 6-seater/8-seater & 10-seater) Top(roof) frame material 40mm X 40mm X 5mm(thick)
Required35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle 40mm X 40mm X 5mm(thick)
Required35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle Top(roof) support frame structure 40mm X 5mm(thick)
Required35mm X 5mm(thick)
Required25mm X 3mm(thick) MS flat 40mm X 5mm(thick)
Required35mm X 5mm(thick)
Required25mm X 3mm(thick) MS flat Partition frame material 35mm X 35mm X 5mm(thick)
Required25mm X 25 mm X 3mm(thick) MS angle 35mm X 35mm X 5mm(thick)
Required25mm X 25 mm X 3mm(thick) MS angle Ventilation frame material 25mm X 25mm X 3mm(thick) flat MS * Door frame material 50mm X 25mm of 14-16gauge rectangular MS hollow pipe 50mm X 25mm of 14-16gauge rectangular MS hollow pipe Support material for Door panel fixing Aluminium U-channel of 18gauge Aluminium U-channel of 18gauge 3/8 Door hinges(two numbers) 75mm size with 1.2-1.5mm thickness MS * Tank holder frame material 25mm X 3mm (thick) MS flat 25mm X 3mm (thick) MS flat PANEL MATERIAL Side panel material 18 gauge MS sheet 18 gauge MS sheet Top(Roof) panel material 4mm polycarbonate sheet with U channel for water drain 4mm polycarbonate sheet with U channel for water drain Door panel material Outside paneling of 18 gauge aluminum sheet(corrugated sheet) Outside paneling of 18 gauge aluminum sheet(corrugated sheet) partition panel material Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA) Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA) Floor material Anti skid tile finish floor inside toilet Anti skid tile finish floor inside toilet DIMENSION Size of each cubical(LXWXH) ± 25mm 890mm X 840mm X 1980mm 890mm X 840mm X 1980mm Door size(WxH) ± 20mm 610mm X 1750mm * Ventilation size(WXH) ± 10mm 838mm X 150mm(above door) plus 838mm X 75mm(opposite side) * Partition height ± 20mm 1830mm * Single pan size ± 10mm As per buyer's choice * Overall Length(mm) ± 25mm 5590mm for 10-seater 5590mm for 10-seater Overall Width including pathway(mm) ± 25mm 3200mm (with path way) for 10(in two rows) seater and 2100mm without pathway 3200mm (with path way) for 10(in two rows) seater and 2100mm without pathway Total height ± 25mm 3200mm * SEWAGE SUCTION UNIT Capacity of sewage suction unit 5000Ltr * Length of sewage suction unit ± 25mm 3355mm for 6000Ltr * 4/8 Width of sewage suction unit ± 15mm 1830mm for 4000Ltr
Required5000Ltr and 6000Ltr * Capsule Diameter 1525mm * Capsule Thickness 5mm round and 6mm Front and Back * Chassis size of sewage suction unit 205mm x 75mm * Suction pump 7.5 HP * Valve for sewage suction unit Butterfly valve of 100mm * Axle for sewage suction unit 89mm x 1675mm for 4000ltr capacity * Tyres for sewage suction unit Two nos. of size 9.00 x 20ply for 4000ltrs. * Spring leaves for sewage suction unit Two nos. of size 914mm with 13 leaves in each for 4000ltrs. * MISC Door locking bolts Size 100mm of MS * Tower bolt locking Tower bolt of MS size 75mm * Overhead Tank material made of double layer HDPE sheet * Wash basin material made of FRP(fiber reinforced plastic) * WC material Indian style WC seat made of FRP with footrest in simple mould of 2.5mm thick(tray type) * Towel rail/ring made of plastic * Cloth hook made of aluminium * P-trap material made of HDPE(75mm) * Footrest(WC) material N.A N.A Sewage tank material Sludge tank made of FRP 4mm(for 4-seater/6 -seater/8-seater & 10-seater) * Mirror size 455mm X 305mm 455mm X 305mm Electric provision By mean solar energy * Sewage provision Connected to bio- digester * Level indicator provision To be provided in every sewer/sludge tank to know the level of * 5/8 sludge and plan to get it evacuated Water supply connection UPVC pipe connection with all toilet interconnecting * Seat cistern fitting Ceramic cistern to toilet seat Ceramic cistern to toilet seat Soap stand Plastic made Size:125 X 75 mm * Tap material Chrome plated * Base floor surface To be suitably slanted towards WC for proper drainage(for Indian WC) * Trailer Movement facility Two axle of 57mm X 57mm X 2133mm with 4-tyres of size 7.50 X 16 with hubs and bearings for 8-seater and 10-seater Two axle of 57mm X 57mm X 2133mm with 4-tyres of size 7.50 X 16 with hubs and bearings for 8-seater and 10-seater Provision for vent pipe From sludge/Septic tank * Water mug(standard size) Plastic made * Electric point 1 No. electric point to be provided in all toilet 2 watt LED * Stand provision to keep mobile toilet in static position To keep safe Tyre
RequiredTube
Requiredrim and their maintenance * COLOUR & FINISH Colour of cabin As per buyer's choice * Finish With Primer and Paint * CERTIFICATION Test reports to be furnished to buyer's on demand YES * OEM of offered product is ISO 9001:2015 certified YES * WARRANTY Warranty period in number of years 1 1 * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
