Construction of 100 Bedded Maternity Child Health wing with accommodation for staffs at existing Morigaon CH in Morigaon District under NHM Balance work

Amount

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary etc.

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary etc.

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment etc.

Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary etc.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including etc.

Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc.

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved etc.

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing etc. (B) In super structure from plinth level up to 1st floor level. b) M20 grade concrete or Prop. 1:1.5:3

Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.

Sides and Soffits of Beams, beam haunchings, cantilever girders and bressumers.

Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face.

Flat Surfaces such as soffits of suspended floors, roofs, landings and the like.

Vertical surface such as walls (any thickness), Lift shafts, partitions and the like including attached pilasters, butresses, plinth and string courses and the like.

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.4.1

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as etc.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S etc.

Extra for brick walling for each subsequent floor or part thereof above the 1st floor level.

Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement etc.

40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 12.5 mm and down) etc.

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 etc. i) Of size 200mmx200mm and above

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement etc. i)Normal range (Sizes 300 mm x 300mm and above)

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on and treads of steps over 15 mm thick etc. i) Of size 400mmx400mm and above

Chequered Terrazo tiles of 22 mm thickness with marble chips of sizes up to 6 mm fixed on wall with 10 mm thick bed of cement plaster in proportion 1:3 (1 cement : 3 coarse etc.

18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse etc.

Providing polished granite tiles of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, risers and treads of steps over 15 mm thick base etc.

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm etc. A) On rough side 1:4

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm etc. B) On fair side 1:4

Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed.

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Providing and fixing, in position suspended false ceiling using E-Grid (exposed ceiling suspension 2430 system) of grid size 600mm x 600mm/1200mmx600mm with main etc.

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc.

Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws etc.

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming etc.

Providing, fitting and fixing Bison Panel board (Cement Bonded Particle Board) door shutters fixed to 100mmx38mm wooden frames with necessary hinges, screws, bolts etc. (ii) One side laminated

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round etc. II Ornamental grill

Providing and fixing of aluminium curtain glazing made out of Anodised section of approved shade section of 6 nos 1.2m each @ 1.819 Kg/m, 6 nos 1.2m each @ 0.515 Kg/m, etc. II) Using Coloured Anodised section

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred etc.

Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand with door etc.

c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other etc.

m) Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including etc.

p) Extra over item no (m), (n) and (o) above for every subsequent coat of distempering with oil bound distemper of approved etc.

q) Extra over item no (m), (n) above for distempering with oil bound distemper of approved brand and manufacture on celing and sloping roof.

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other etc.

Providing two coats of J.K Wall Putty ( White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering etc.

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other etc.

b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after etc.

Applying priming coat over new wood based surfaces up to 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other etc.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J etc.

Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an etc.

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk etc. a) Sliding door bolts i) 300mm x 16mm

b) Tower bolts iv) 150mm x 10mm

c) Door handles iii) 150mm

Door closure

t) Door stopper with rubber stopper

f) Curtain rod

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending etc. (ii)Super Ductile (SD) TMT reinforcement bars a) M.S. Rod

Extra for subsequent floor

Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section etc.

Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head etc.

Providing plinth protection 50mm thick to cement concrete 1 : 3 : 6 with coarse agg.of 20mm nominal size including finishing the surface with 10mm thick cement plaster etc.

Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm etc.

Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire etc.

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square etc.

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS etc. A) Parryware make a) White

Providing vitreous china wash of size 550mm x 400mm of Parryware make with CI/ MS brackets, 32mm CP brass stc. (a) white vitreous China wash basin of size 500mm x 400mm

Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including etc. (A) Parryware Make (vi) Single Bowl (160 x 180) Flat Edge - Glossy (Cat.No.C8538)

Providing fitting & fixing laboratory sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting etc. (B) Hindware make (ii) Size 450 x 300 x 180 (Cat.No.50001)

Providing fitting and fixing Decorative Mirror complete as directed and specified.

Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified.

Providing, fitting and fixing CP towel rail complete as directed and specified. (b) Sona make

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all etc. (ii) 110m dia

(v) 63mm dia

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels etc. (ii) 110mm dia

(iv) 75mm dia

Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (ii) 110mm dia. PVC cowel of ISI make

Supplying fiting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including etc.

Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat etc.

Supplying Fitting and fixing Mono layer UV stabisised PP-R ( Poly propylene-random copolymer) Pipes, SDR-11 Fusion welded having thermal stability for hot and cold water etc. (c) 50 mm dia

(e) 32mm dia

(b) 25mm dia

(ii) 20mm dia

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) etc. Jaquare make

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured etc. Jaquar (ii)15mm dia( Angular stop cock )

(iv) Sona brand (a) 15mm dia Stop cock male-female /Angle stop cock

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. Jaguar make (a) Continental

(b)Long neck with aerator

Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately) etc.

a) Sink cock casted swing spout

Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning etc. a) 1000 Ltr. Capacity

(b) 2000 Lt capacity

Labour for test boring with 40mm (internal) dia G.I. Pipes including keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same in nearest P.W.D. etc.

Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking etc. 200mm dia

Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering etc. (II) PVC PIPE vii) 160mm diameter

Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly etc,. ii) 32mm diameter

Supplying fitting and fixing brass Tez filter 2.00 metre long.

Supplying fitting and fixing check valve (non return valve) including thread to pipes. vii) 100mm diameter

Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained

Flushing, clearing, washing and watering of the tube well

Supplying fitting and fixing iron removal filter filling with treated sand, pebbles, manganishdioxide and other required materials of various filtration rate per hour of DOLPHIN etc.

Wiring to a light point with 1.5 sq.mm PVC insulated unsheathed 1.1KV grade ISI marked as approved by this department single core copper conductor cable in Recessed ….. Phelolic laminated sheet cover ceiling rose complete Short point upto 3.00 mtr. Length

Medium point upto 6.00 mtr. Length

Long point upto 10.00 mtr. Length

Wiring as in item no 1 above Recessed PVC conduit wiring system with 19mm, 2.0mm thick thick rigid PVC conduit a Fan/exhaust Pan point inlcuding 6Amps flush type (ISI marked) switch, ceiling roase IC ……. Cover as required complete. Short point upto 3.00 mtr. Length

Medium point upto 6.00 mtr. Length

Long point upto 10.00 mtr. Length

Medium point upto 6.00 mtr. Length

Wiring 5 pin 6 Amps plug with 1.5sq. Mm PVC insulated unsheathed single 1.1KV grade ISI marked (as approved by this department) single core copper conductor cable in Recessed PVC conduit wiring system including 5 pin 6 Amps flush type …….. Etc as required complete with 19mm dia. Short point upto 3.00 mtr. Length

Medium point upto 6.00 mtr. Length

Long point upto 10.00 mtr. Length

Wiring as in item no. 4 when fixed on the same board in Recessed PVC conduit wiring system on the recessed IC switch board.

Medium point upto 6.00 mtr. Length

Wiring 5 pin 16 Amps power plug point with 4 sq. Mm PVC insulated unsheathed ISI marked single core copper conductor cable in Recessed PVC conduit wiring system including providing and fixing 5 pin 6 Amps flush type …….. Etc as required complete with 19mm dia. Short point upto 3.00 mtr. Length

Medium point upto 6.00 mtr. Length

Long point upto 10.00 mtr. Length

Wiring 5 pin 16 Amps power plug point with 6 sq. Mm PVC insulated unsheathed ISI marked single core copper conductor cable in Recessed PVC conduit wiring system including providing and fixing 5 pin 6 Amps flush type …….. Etc as required complete with 19mm dia. Short point upto 3.00 mtr. Length

Medium point upto 6.00 mtr. Length

Long point upto 10.00 mtr. Length

Wiring for drawing sub-main line with PVC insulated unsheathed 1.1KV grade (ISI marked or as approved by this department) single core copper conductor cable in with earth continuity in Recessed PVC conduit wiring system with 2 x 2.5sq.mm + earth continuity with 1 x 2.5sq.mm PVC insulated unsheathed single core copper conductor in 19mm dia 2.00mm thick Rigid PVC conduit pipes.

With 3 x 4 sq.mm + earth continuity with 1x4 sq.mm PVC insulated unsheathed single core copper conductor cable in 25mm dia 2.00mm thick rigid PVC conduit pipes.

With 3 x 6 sq.mm + earth continuity with 1x4 sq.mm PVC insulated unsheathed single core copper conductor cable in 25mm dia 2.00mm thick rigid PVC conduit pipes.

With 3 x 10 sq.mm + earth continuity with 1x4 sq.mm PVC insulated unsheathed single core copper conductor cable in 25mm dia 2.00mm thick rigid PVC conduit pipes.

Supply and laying of following size PVCIXLPE insulated and PVC sheathed 11KV gd aluminium conductor LT armoured UG cable laid in pucca flooring road crossing drain crossing and partially in air ………………1/2 core UG cable in 80mm dia medium quality GI pipe.

150.00mm2 3&1/2 core UG cable in 80mm dia medium quality GI pipe

4.00mm2 3&1/2 core UG cable in 80mm dia medium quality GI pipe

6.00mm2 3&1/2 core UG cable in 80mm dia medium quality GI pipe

10.00mm2 3&1/2 core UG cable in 80mm dia medium quality GI pipe

16.00mm2 3&1/2 core UG cable in 80mm dia medium quality GI pipe

25.00mm2 3&1/2 core UG cable in 80mm dia medium quality GI pipe

Supply, installation, Testing and commissioning of TP & N.3 x 6 way MCB Distribution board for normal light loan ('B' curve MCB's) double door, dust, vermin proof and copper bus bar comprising of the following : 1no. 4P 40A MCB as incomer, 3nos. 40A DP 100mA RCCB as phase isolator, 18nos. 6A-16SP MCBs as outgoing.

Supply, installation, Testing and commissioning of TP & N.3 x 6 way MCB Distribution board for normal light loan ('B' curve MCB's) double door, dust, vermin proof and copper bus bar comprising of the following : 1no. 4P 40A MCB as incomer, 3nos. 40A DP 30mA RCCB as phase isolator, 18nos. 6A-10 SP MCBs as outgoing.

Supply, installation, Testing and commissioning of TP & N.3 x 4 way MCB Distribution board for normal light loan ('B' curve MCB's) double door, dust, vermin proof and copper bus bar comprising of the following : 1no. 4P 40A MCB as incomer, 3nos. 40A DP 100mA RCCB as phase isolator, 18nos. 6A-16 SP MCBs as outgoing.

Supply, installation, Testing and commissioning of TP & N.3 x 4 way MCB Distribution board for normal light loan ('B' curve MCB's) double door, dust, vermin proof and copper bus bar comprising of the following : 1no. 4P ELCB 40A, 300mA outgoing : 6nos. 15A, SP MCBs.

Supply, installation, Testing and commissioning of TP & N.3 x 4 way MCB Distribution board (MDS, Havel, Siemens and any other reputed make) for normal light loan ('B' curve MCB's) double door, dust, vermin proof and copper bus bar comprising of the following : 1no. 4P ELCB 40A, 300mA outgoing : 6nos. 15A, SP MCBs.

Control Panel : Fabrication, supply, Installation Commissioning and Testing of Medium voltage cubical Distribution Panel made of CR sheet (16SWG) and power coated suitable for 415 volts, 3 phase, 50 Hz power distrbution ……….. Specification Main Electrical control Panel : Incomer from Transformer 4P MCCB, 630A, 1No. Outgoing : TP & N MCCB, 125A, 4 Nos. TP & N MCCB, 63A, 3 Nos. TPN MCCB 32A-5 Nos.

Incomer : TP &N MCCB, 125A 1 No. Outgoing 4 Nos. 40A, 4P 25KA MCB Siemens or any other reputed make.

Installation of Earth Station with 40mm dia and 4.50 ntr long GI pipe with necessary GI reducing socket 40mm x 20mm size locking arrangement with hinged cover plate. Funnel G.I. nuts, through bolts etc. for putting pipe and re-fitting with necessary enclosure on the top etc. as required complete.

Extra for using salt (5kg) and Charcoal (64kg for pipe earth electrod as required)

Supplying and laying GI strips 0.50 meter below below ground level as strip earth electrods including soldering excavation work and reffiling etc as required complete with 25mm x 4mm GI strip.

Providing and fixing 8SWG GI earth wire on surface or in recessed for loop earthing as required complete.

Installation of Earth Station with necessary Earth plate including providing all accessories masonary enclosure with cover plate having locking arrangement and 20mm dia G.I. pipe, watering pipe with funnel, GI bolt, nuts, checknuts etc. but without charcoal or coke and salt as required ......... 600mm x 600mm x 3mm thick (10.5kg approx) copper earth plate.

Extra for charcoal (96kg) and salt (5kg) for GI/Copper plate earth elctrode as required complete.

Providing and fixing lightning conductor finial made of 25mm dia 300mm long GI tube having single prong at top with 85mm dia 3mm thick G.I. base plate including making hole and fitted with necessary 6mm dia rag bolts & nuts.

Riveting, sweating and soldering of copper/G.I. strip with another copper/G.I. strip base of the final or any other metalic object as required.

Providing and fixing GI strip 20mm x 3mm thicks on parapet and surface or wall for lightning conductor as required for horizontal runs

For vertical

Providing and fixing of MV danger notice plate of 200 mm x 150mm size made of mild steel at least 2mm thick and vitreous enameled white on both sides and with inscriptions in single red colour on front side letters, figures and conventional skill and bones and fitted with 15mm x 6mm bolts and nuts complete as required.

Supplying and fixing of call bell musical/Ding dong including connection complete as required as directed by the department (sound of the nearest call bell should be different)

Supplying including fitting fixing of high speed AC ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connections etc as required complete and as directed by the department (without regulator) 1200 mm sweep.

1050mm sweep.

Supplying including fitting fixing of AC exhaust fan in the existing hole on the wall of following sweeps and making necessary connections etc as required complete and as directed by the department domestic -225/230mm sweep

Supplying including fitting fixing of Electronic Registrance Type regulator for ceiling fan complete with all connections in existing board as required complete and as directed by department.

Supplying , Installation testing and coomissioning of the following TL5 Flourecent luminaries complete with all accessories such as ballast, staeter etc directly on wall/ ceiling including connection with 1.5 sq.mm PVC insulated SC copper conductor as required and as directed by the department. ADRENO 28W TWG207 x TL528W HF (45% energy saving as compared ....... etc. helps in extra long life. Stop Circuit - Additional safety feature)

Supplying intallation, testing and commissioning of the following prewired CFL/Flourescent luminaries with all accessories such as ballast, starter etc. directly on wall/ceilling including connection with 1.5 sq. mm PVC insulated single core copper conductor as reqd. and as directed by the Deptt. (ii) Decorative surface mounting CFL luminaries complete with copper ballast, diffuser and 1x11 watt. CFL lamp. (philips make, model-FMS200/111.)

i) Box type luminaries with copper ballast and 2x 36/40 watt. Flourescent tube. (Bajajmake) Model-BJIR 236/240.

ii) Bulkhead fittings complete with all accessories, opal acrilic cover and 1x9watt CFL/PLS lamp, Phillips make, model-FXC101

(iii) Decorative square type lumineries with acrylic cover and 4x18 watt. Flourescent tube. (Havells make) Model-

Supplying and fixing fancy wall bracket of Anodised aluminium 12mm dia fixed on 3mm thick 170mm x 40mm MS plate with brass bracket lamp holder including shade etc. and connection complete (without bulbs)

Supplying and fitting of 18/20 watt CFL lamp in the existing brass batten holder/ angle holder/decorative brackt/ bulk head fittings etc. as specified and directed by the Department.

Supply fitting and fixing of prefabricated suspended type socket outlet box suspended from ceiling in operation thetres made of sheet and thickness not less than 2mm and structural having light section with door including magnetic locking system. The box shall be completely dust tight and vermin proof ..... etc 2 Nos. of 16A socket outlet with switch complete including connections as required complete.

Supplying including installation testing and commissioning of Hi-Wall Non ductable type of 1.50 Ton capacity having proper cooling capacity single phase STAR 3 MODEL, split type Air Conditioner Machine complete with corded Remote, copper pipe connection between indoor & outdoor unit, electrical connection etc. (Blue Star make)

Supplying and fitting fixing of electric storage water heater (Geyser) of AOS-Jaquar make including necessary connection etc as required complete and as directed by the Department. Vertical 25ltr. Capacity (Mannual)

Wiring to a light point with 1.5 sq.mm PVC insulated unsheathed 1.1KV grade (RR keble/Finolex/Havells make) as approved by this department single core copper conductor cable in Recessed PVC conduit wiring system with 20mm dia 2mm thick rigid P. Short point upto 3.00 mtr. Length

Medium point upto 6.00 mtr. Length

Long point upto 10.00 mtr. Length

Wiring as in Item No. 1 above in Recessed PVC conduit wiring system 20mm dia 2mm thick rigid PVC conduit to a Fan/exhaust Fan point including 6Amps flush type (Anchor/Kolors kany.com make) switch, ceiling rose IC switch board with phenol. Short point upto 3.00 mtr. Length

Medium point upto 6.00 mtr. Length

Long point upto 10.00 mtr. Length

Medium point upto 6.00 mtr. Length

Wiring to 5 pin 6 Amps plug with 1.5 sq.mm PVC insulated unsheathed 1.1KV grade ISI marked (RR keble/ Finolex/ Havells make) single core copper conductor cable in Recessed PVC conduit wiring system including 5pin 6Amps plug socket. Short point upto 3.00 mtr. Length

Medium point upto 6.00 mtr. Length

Long point upto 10.00 mtr. Length

Wiring as in Item No. 4 when fixed on the same board in Recessed PVC conduit wiring system on the recessed IC switch board.

Wiring to 5 pin 16 Amps power plug with 4 sq.mm PVC insulated unsheathed ISI marked single core copper conductor cable (RR kabel/ Finolex/ Havells make) Recessed PVC conduit wiring system including providing and fixing 5pin 16Amps . Short point upto 3.00 mtr. Length

Medium point upto 6.00 mtr. Length

Long point upto 10.00 mtr. Length

Wiring for drawing sub-main line with PVC insulated unsheathed 1.1KV grade (ISI marked RR Kabel/ Finolex/ Havells make) single core copper conductor cable in with earth continuity in Recessed PVC conduit wiring system with 2 x 2.5sq.mm + earth continuity with 1x2.5 sq.mm PVC insulated unsheathed single core copper conductor cable in 20mm dia 2mm thick rigid PVC conduit pipes.

With 3x4sq.mm + earth continuity with 1x2.5 sq. mm PVC. Insulated unsheathed single core copper conductor cable in 20 mm. thick Rigid p.v.c. Conduit pipes.

With 3x10sq.mm + earth continuity with 1x6 sq. mm PVC. Insulated unsheathed single core copper conductor cable in 32 mm. thick Rigid p.v.c. Conduit pipes.

Supply and laying of following size PVC sheathed 11 kv gd aluminium conductor LT armoured UG. Cable laid in ground/ partially in air (10.0% of cable length) including excavation af cable trench upto depth of 75cm, refilling, protecti 25.00 mm23&1/2core U.G. cable.

Supplying including fitting and fixing Bus bar chamber with 4 steps Bus bar of length 350mm/ 450mm/ 600mm/ 900mm made of alumium alloy or wrought aluminium suitable for 100Amps capcity complete with all accessories including connections etc. as required.

Supplying with fitting and fixing Double Pole 240/415V 50Hz AC23A duty double break open execution panel mounting cubical type switch disconnector fuse unit (IP-20) protection) with HBC fuse Bolted type) of the following capacity complete with making necessary connection as specified and directed by the deptt. 32A

Supplying fitting and fixing industrial Plug & socket in surface mounting SPN sheet steel powder panted MCB DB incorporate with MCB, DIN rall, Neutral link, Earth bar and following rating of SPN industrial etc. as spec 20A capacity SPN industrial plug & socket with metal box and 1No. SPN MCB

Supply, Intallation, Testing and commissioning of SP & N.6 way, MCB Distribution Board (MDS, Havel, Siemens and any other reputed make) with double door, dust, vermin proof and copper bus bar comprising of the following incoming : 1No. DP, ELCB 25A, 100mA outgoing : 5nos. 6/16 SP MCBs.

Supply, Intallation, Testing and commissioning of SP & N.6 way, MCB Distribution Board (MDS, Havel, Siemens and any other reputed make) with double door, dust, vermin proof and copper bus bar comprising of the following incoming : 1No. DP, ELCB 25A, 100mA outgoing : 5nos. 6/16 SP MCBs.

Supply, Intallation, Testing and commissioning of TP & N.3 x 4 way, MCB Distribution Board (MDS, Havel, Siemens and any other reputed make) with double door, dust, vermin proof and copper bus bar comprising of the following incoming : 1No. 4 P.ELCB, 40A, 300mA outgoing : 12nos. 6/16 SP MCBs.

Installation of Earth station with 40mm dia and 4.50 ntr long GI pipe with necessary GI reducing socket 40mm x 20mm size locking arrangement with hinged cover plate. Funnel G.I. nuts, through bolts etc. for putting pipe and re-fitting with necessary enclosed.

Extra for using salt (5kg) and Charcoal (64kg for pipe earth electrod as required)

Supplying and laying 8SWG Copper wire at 0.50 meter below ground level afor conductor earth electrods including soldering excavation work and reffiling etc as required complete. Do with 6SWG GI earth wire.

Do with 6 SWG GI earth wire

Do with 6 SWG GI earth wire

Box type liminaire with copper ballast and 1x40 watt flurescent tube

Supply, Intallation, Testing and commissioning of ceiling Fan, Exhaust Fan including regulator, all accessories and cutting and repairing of wall for fixing Exhaust fan etc. complete Make Usha, orient, Khaitan or any other reputed make wall cabin Fan 300mm sweep.

Providing and fixing of lighting conductor finial made of 25mm long GI tube having single prong top with 85mm dia 3mm thick GI base plate including making hole and fitted with necessary 6mm dia rag bolts & nuts.

Providing and fixing GI strip 20mm x 3mm thicks on parapet and surface or wall for lightning conductor as required for horizontal runs

For vertical runs

Providing and fixing copper GI strip 20x3 mm thick on parapat and surface or wall for Lighting conductor as required for horizontal run

For vertical runs

Supplying and fixing fancy wall bracket of Anodised aluminium 12mm dia fixed on 3mm thick 170mm x 40mm MS plate with brass bracket lamp holder including shade etc. and connection complete (without bulbs)

Supplying and fitting of 18/20 watt CFL lamp in the existing brass batten holder/ angle holder/decorative brackt/ bulk head fittings etc. as specified and directed by the Department.

Supplying including fitting fixing of high speed AC ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connections etc as required complete and as directed by the department (without regulator)

Supplying including fitting fixing of Electronic STEP type regulator for ceiling fan complete with all connections in existing board as required complete and as directed by department.

Supplying including fitting fixing of AC exhaust fan in the existing hole on the wall of following sweeps and making necessary connections etc as required complete and as directed by the department -300/305mm sweep

Supplying and fixing call bell (Buzzer) including 5 Amps capcity flush type bell push switch including connections etc. as required complete.

Supply fitting of Danger plate.

Supply installation, testing & commissioning of 15 passengers hospital lift as per specification (Make : KONE/OTIS) & as directed. Type Passenger Capacity : 15 persons- 1020 kg with geared Motor speed : 0.5 Mtr/Sec (approx) Location of machine Room : Top avaiable Travel : 7.2 mtr (Maximum) Serving : Ground floor to 2nd floor - 3 stops, 3 levels, 3 openings. Power supply : 415V three phase 50 cycle AC auxiliary Required : Single phase 220 V 50 cycle AC car size (Clear inside) approx : 1000mm etc. ...... opening 800mm wide x 2000mm high indicators : Car & Landings, Direction & position Indicator.

M/S. M.P. AGARWALLA

UCN CONSTRUCTION COMPANY PRIVATE LIMITED