PROVN OF ADDN/ALTERATION TO RETAINING WALL BY INCREASING HEIGHT JCOS/OR MD ACCN AND CERTAIN SANCTIONED B/R WORKS AT JAK LI RC, HAFT CHINAR AND TATTOO GROUND UNDER GE 970 EWS

Amount

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Material & labour for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete etc complete all as specified and directed.

Material & labour for mild steel high yield strength TMT bars 10mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Material & labour for mild steel high yield strength TMT bars 5mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Material & labour for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, for rough finished concrete surfaces complete all as specified and directed by the Engr-in-Charge.

Material & labour for use and waste of formwork to sides and soffits of floor or roof beams, beam hunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc. over 1.5m span complete all as specified and directed.

Material & labour for use and waste of formwork to rough finish surface of concrete flat, soffits of suspended slabs such as roof slabs, floor slabs,supported on wall etc. landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified.

Material & labour for use and waste of formwork to sides of pillars & posts etc surfaces finished rough complete all as specified.

Material & labour for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work, not exceeding 200mm thick (horizontal or sloping) for fair finished surface of flat surface of concrete complete all as specified and directed by the Engr-in-Charge.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete wall, floors and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but nexc 20cm wide complete all as specified and directed.

M&L RCC M-25 using 20 mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete all as specified and directed by Engr-in-Charge.

M&L RCC M-25 using 20 mm graded aggregate as in Columns, pillars, piers, posts and struts all as specified and directed by Engr-in-Charge.

M&L RCC M-25 using 20 mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed by Engr-in-Charge.

M&L RCC M-25 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies canopies, deck slabs and in the shelves all as specified and directed by Engr-in-Charge.

M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks complete all as specified and directed by Engr-in-Charge.

Returning filling in layers including leveling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer in Charge.

Material & labour for bricks work as in half brick thick wall using sub class `B’ bricks straight or curved on plan to any radius built in cement mortar 1:4 exceeding 6m radius complete all as specified and directed.

M&L for 40 mm thick Damp proof course (DPC) in cement mortar 1:2:4, type B-0 including integral water proofing compound to horizontal or vertical surfaces including necessary formwork complete all as specified and directed by Engr-in-Charge.

M&L rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrte surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Material & labour for 10mm thick cement plaster in cement mortar (1:4) on stone masonary surfaces other than fair faces of brick finished rough to receive tiles complete all as specified

Material & labour for preparation of new plastered surface of walls and applying three coats of white washing complete all as specified and directed.

M&L for preparation of new surfaces of walls and applying two coats of cement base complete all as directed by Engineer in charge.

Supply and fix steel ventilator with top hung or side hung shutter including hinges, steel peg stay, complete all as specified and directed.

Supply and fix 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Supply and fix mild steel rolled section as in roof trusses (framed), trussed, purlins, crane grantries, rails and fastening and heavy brackets framing (Beam, tee, channel or flat section) incluidng distance pieces cleats etc conforming to Fe-290. Gde-E-165 including all as specified and directed.

Supply and fix plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment etc conforming to Fe 410-W (Gde E-250) quality - B complete all as specified and directed.

Supply and fix mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 30cm dia of neck 20 to 25mm complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 cm width or girth , and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as in ridge,eaves boards, hips, velly gutter drip and straight flushing of reuired machine moulded shape and size complete all as specified and directed by Engr-in-Charge.

M&L for Sand filling under floors or in foundation including watering and consolidation all as specified and directed by Engr-in-Charge.

Material & labour for hard core of broken stone or boulder of gauge n. exc. 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection / hard standing and finished the surfaces even and smooth with out using extra cement all as directed by Engineer in charge.

Material & labour for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate), as in sub base complete all as specified & directed.

Material & labour for 25mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate), as in leveling concrete in floor finished even & rough to receive top floor layer/finish complete all as specified & directed.

M&L for 15mm thick screed bed or beding layer in cement mortor 1:6 complete all as complete all as specified and directed.

M&L non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge

M&L glazed ceramic coloured, tiles in 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engr-in-Charge

S&F factory made solid PVC door Frame of size 50 mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed by Engr-in-Chage.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed by Engr-in-Chage.

S&F 100mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge.

S&F Extruded aluminium alloy handles 75mm long fabricated type anodised complete all as specified and directed by Engr-in-Charge.

S&F Butt hinges, extruded aluminium with galvanised mild steel hinge pin, anodised and fixed, type B-11, 75mm long complete all as specified.

S&F Butt hinges, extruded aluminium with galvanised mild steel hinge pin, anodised and fixed, type B-11, 100mm long complete all as specified.

Supply & fix in repairs PVC connection 15mm bore size with PTMT nuts of length 300mm complete all as specified and directed.

Supply and fix, urinal, flat back or corner wall type of size 465x355x265mm white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete all as specified and directed.

S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete all as specified and directed.

S&F vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest including trap, PVC flushing pipe and anti-syphonage pipe including PVC valveless, syphonic action, flushing cistern 10 ltr capacity, low level, white, with inlet ball valve, float and handle including brackets, UPVC traps 'P' or 'S' of 110mm dia. complete all as specified and directed.

S&F vitreous china wash basin, white, flat back, size 600 x 480 mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 32 mm bore waste coupling, 15 mm dia CP pillar taps complete all as specified and directed.

S&F Soap dish, vitreous China white, approximate size 160x160x90mm complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore bib tap long nose/long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass, weight n ot less than 450 gms ferrule and fixed complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends class -1 ISI marked of size 15mm dia for iron pipe and fixed all as specified.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends class -1 ISI marked of size 20mm dia for iron pipe and fixed all as specified.

Supply & fix stop valve fancy type chromium plated 15mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket, complete all as specified and directed.

S&F 110mm bore UPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engr-in-Charge.

Ditto- all as per item no. 58 above but 75mm bore pipe complete all as specified and directed

S&F 110mm bore UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with necessary MS clamps complete all as specified and directed by Engr-in-Charge.

Ditto- all as per item no. 60 above but 75mm bore pipe complete all as specified and directed

S&F 110 mm UPVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.

S&F 75 mm UPVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs UPVC (SWR) 110mm branch piece single (Single 'Y') equal or unequal complete all as specified and directed.

Supply & fix in repairs UPVC (SWR) 75mm branch piece single (Single 'Y') equal or unequal complete all as specified and directed.

Supply & fix UPVC (SWR) 75mm bore vent cowl complete all as specified and directed.

Supply & fix UPVC (SWR) 110mm bore S trap complete all as specified and directed.

Material & labour for PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed.

S&F PTMT grating doom with or without waste hole 75 mm dia.(Min.weight 25gms).complete all as specified and directed.

Supply & fix brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank (multilayer quality) cylindrical vertical with closed top of capacity 500 litres, hoisted and fixed in position with connecting ports (inlet, outlet and over flows) including 25 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete, all as specified and as directed.

M&L for Lagging to 15mm GI pipes used in internal water supply or plumbing all round with, 40mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 , provided with chicken mesh wire netting 25 gauge, 20mm mesh and with with 0.01mm aluminium foil complete all as specified and directed.

M&L for Lagging to 25 mm GI pipes used in internal water supply or plumbing all round with, 40mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 , provided with chicken mesh wire netting 25 gauge, 20mm mesh and with with 0.01mm aluminium foil complete all as specified and directed.

S&F of 25mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends class -1 ISI marked of size 25mm dia for iron pipe and fixed all as specified.

Surface excavtion not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Material & labour for hard core of broken stone or boulder of gauge exc. 63mm but n. exc. 100mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.

M&L for 20mm thick screed bed or beding layer in cement mortor 1:4 complete all as complete all as specified and directed.

Material & labour for chequered cement concrete coloured tiles 20cm x 20cm x 25mm thick, with grey cement and pigment, jointed and pointed in neat cement slurry in floor complete all as specified and directed.

M&L for concrete bed to drain pipes 150mm bore laid bed including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 complete all as specified and directed by Engr-in-Charge.

Material & labour for salt glazed stone ware drain pipe Grade-A 150mm bore laid in trenches, jointed and tested as per IS-651-1980 complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:4) using old size bricks complete all as specified and directed by Engr-in-Charge.

M&L rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrte surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for Framed work such as grills,tubular square pipes,square bars gratings, etc.. with ends of bars shouldered and/or welded, riveted,or forged into spikes; framed guard bars; framed balusters; walk ways; railings; framework and similar work con- forming to Fe.290.Gde-E-165 incl necessary welding complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and precast concrete articles, complete all as specified.

M&L Walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 etc, complete all as specified.

All as per item No 86 here-in-before but except stone.

M&L for Precast cement concrete 1:3:6, type C-1(using 20 mm graded crushed stone aggregates) as in bonders, solid blocks exc 10 cm in width and setting in Cement Mortar 1:4 complete all as specified.

M&L PCC 1:2:4, type B-1(using 20 mm graded crushed stone aggregates) as in coping including weathering, slightly rounded for chamfered angles and throating, complete all as specified.

S&F Welded steel wire fabric supplied and fixed complete to wood or steel members by welding or any method exc 4 kg per sqm complete all as specified.

M&L cement concrete (1:3:6) type C0 using 20mm graded stone as in foundation filling, mass concrete etc complete all as specified.

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling/ china moisac including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frame with shutter (with or without taking off shutter from the frame) area exc 1.5 Sqm but n. exc 4 sqm each for doors and windows complete all as specified and directed.

S&F 2nd class hardwood plain solid, straight chowkat and frames, wrought, framed rebated (one or more rebated) on the solid, rounded or chamfered put together with glue pinned at joints all as specified in and directed by Engr-in-Charge.

Supply and fix 2nd class soft wood Plain, framed panelled shutters 35mm thick (any number of panels) with panels of timber flat on both sides (feather edges) or of veneered particle board medium density, wood particle board with commecial face veneers, applied and fitted to chowkats, complete as specified and directed.

Supply & fix 300 mm long aluminum anodized sliding door bolt, plate type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed by Engr-in-Charge.

S&F Extruded aluminium alloy handles 100 mm long fabricated type anodised complete all as specified and directed by Engr-in-Charge.

S&F 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden or wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted wooden or wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Dismantaling water tanks of capacity 500 litres complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1, using 20mm graded stone aggregate in roof kerb or mud stops rounded or chamfered edges etc.complete all as specified and directed.

M&L rendering 10 mm thick in CM 1:3 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on fair faces of brick or concrete surfaces of any description, and finishing the surfaces even and fair complete all as specified and directed by Engr-in-Charge. (Note: water proofing compound shall be measured and paid seperately)

Supply only integral water proofing compound all as specified and directed

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 15 mm complete all as specified.

All as per item No 109 here-in-before but 20mm bore.

S&F in repairs vitreous china wash basin, white, flat back, size 600 x 480 mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 32 mm bore waste coupling, 15 mm dia CP pillar taps complete all as specified and directed.

Supply & fix in repairs squatting pan WC Orissa pattern size 580mm x 440mm white with integral foot rest (excluding flushing cistern) with P or S trap including provision of lime concrete bedding complete all as specified and directed.

S&FIn repair Vitreous China urinals,full stall (back or corner wall type),complete including providing and fixing plugs, bedding urinalagainst wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement;, white , with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including Waste coupling of PTMT(half or full threaded) suitable for urinals, (Minimum weight 32mm-45gms Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) all as specified and directed.

Supply and fix in repairs PVC valveless, symphonic action type, flushing cistern low level, white with inlet ball valve, float valve and handle including brackets 10 ltrs capacity fixed including flush pipe of polyethylene of low and high density of PVC 32 mm for low level cistern all as specified and as directed.

S&F in repairs soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply & fix in repairs brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges complete all as specified and directed.

S&F in repair 15 mm dia CP Central Hole Basin Mixer without Pop-up waste system complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connection with brass ferrules, 60 cm long for wash basins and flush tanks complete all as specified and directed.

Dismantling of cast iron/PVC/reinforced concrete drain pipes jointed in cement mortar, 110mm/75mm bore of pipe complete all as specified and directed.

Excavation over areas, n exc 1.50m deep and getting out in soft/loose soil complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 mean radius built in laid dry complete all as specified.

M&L brick work with sub class 'B' bricks straight or curved in plan n exc 6 mtr mean radius built in CM (1:4) using old size bricks complete all as specified and directed by Engr-in-Charge.

M&L for Loose filling with brocken brick aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.

M&L for providing precaste cement concrete 1:2:4 type B1 (20 mm graded aggregate) set in CM 1:6 as in cover slabs (for manholes etc) with plain fair faces all as specified

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as specified and directed.

Material & labour for 80mm thick non skid pre polished coloured interlocking paver block made with electro vibro technology with rubber/ PVC moulded of not less than compresive strength 30 Kg/Cm and shape and size confirming to IS 15658-2006 of M-40 Grade with grey cement and pigment over 25mm thick dry sand cushioning including with dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer in Charge.The Interlocking Paver blocks shall be procured directly from one of the Manufacturers specified. Note:-The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE.

S&F Steel water tubing 40 mm bore medium grade galvanised with all fittings including short length , fixed to walls and ceiling and laid in floor complete with all fittings complete all as specified.

Material & labour for granite (of any type) work, 18 to 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good including 10mm thick in cement mortar (1:4) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed.

Material & labour for point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLSH) drawn through and including PVC casing caping/conduit of suitable size bore (ISI marked) and accessories fixed on surface, including terminated in to Cast iron/pressed steel terminal box 60mm deep of required size made out of 2mm thick MS sheet with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable(FRLSH), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly One light point / fan point / bell push point controlled by one way switch 5 Amprs complete all as specified and directed.

Supply and fix in repairs sheet metal enclosures for DB's with 200 Amp rated bus bar double door class IP-43 epoxy coated inside and outside 4 way SPN 240 volts complete all as specified and directed.

Supply and fix MCB SP 6 to 30 Amp, 240 volts,10 KA, C-curve complete all as specified and directed.

Supply and fix MCB SPN 20 Amp, 240 volts,10 KA, C-curve complete all as specified and directed.

Supply and fix switch piano flush type, 5 Amps, 240V AC, single pole, one way complete all as specified and directed .

Supply and fix in repairs Ceiling rose 2/3 terminals size 50x65mm surface type all as specified and directed

Supply and fix in repairs Fluorescent tube light fitting, LED batten with aluminium housing provided for efficient heat dissipation wirh polycarbonate diffuser and integrated electronic driver, 1x 10W 2 feet light fitting with white acrylic cover along with LED lamp white colour complete and connecteing electrically to ceiling rose using PVC insulated and overall sheated flexible copper conductor of size 0.75 Sqmm 3 core fixed complete all as specified and directed. Make : bajaj Cat Part No.LHEXBQP6IN1W010 of Bajaj or equivalent make as given in appendix 'E' of particular specification. Note (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall produce LM-79 & LM-80 report of NABL accedited labortory from manufaturers.

Supply and laying, of XLPE under ground insulated,,armoured,heavy duty LT 1100 volts 10 Sqmm 2 core grade cable with aluminium conductor laid in trenches/pipes, fixed to poles/walls with suitable saddle complete all as directed all as specified and directed by Engr-in-Charge.

M/S Manzoor and Co

M/S B A Traders